Spin coating of thin and ultrathin polymer films

The spin coating of thin (> 200 nm thick) and ultrathin (< 200 nm thick) polymer films is examined in several solvents of varying volatility over a broad range of polymer solution concentrations and spin speeds. Experimentally measured film thicknesses are compared with a simple model proposed by Bornside, Macosko, and Scriven, which predicts film thickness based on the initial properties of the polymer solution, solvent, and spin speed. This model is found to predict film thickness values within 10% over the entire range of conditions explored, which gave film thicknesses from 10 nm to 33 μ:m. The model underpredicts film thickness for cases in which a very volatile solvent is used or the initial concentration of polymer is high, while overpredicting film thickness for cases in which a low volatility solvent is used or the initial polymer concentration is very low. These deviations are a consequence of how the model decouples fluid flow and solvent evaporation.     

Stereotactic volumetric radiofrequency lesioning of intracranial structures for control of intractable seizures

Computed tomography (CT) scans provide three-dimensional information about intracranial structures, which can be used to place stereotactically guided radiofrequency (RF) lesions and destroy a targeted volume of tissue. This technique was used for lesioning of the corpus callosum (CC) or the amygdala-hippocampus complex (AHC) in 9 patients with intractable seizures. The procedures were monitored by intraoperative CT scans. Lesions were made in the AHC in 7 patients and the CC in 2 patients. In addition, multiple subpial transection (MST) was performed in 6 patients. The longest follow-up is 29 months with a median of 19 months. Five patients (56%) are free of seizures, 3 patients (33%) have greater than 90% reduction in seizure activity and 1 patient (11%) has greater than 50% but at most 90% reduction in seizure activity. There were no complications except for temporary hemiparesis following MST in 1 patient. The results suggest that stereotactic volumetric RF lesioning of the AHC and the CC may be safe and effective in controlling intractable seizures.     

Styrene/4-hydroxystyrene random, block and gradient copolymers modified with an organic dye: Synthesis by controlled radical polymerization and characterization of electrorheological properties

Styrene/4-hydroxystyrene block and gradient copolymers containing the organic dye Disperse Red 1 (S/HSDR) were synthesized using nitroxide-mediated controlled radical polymerization, and a random copolymer was made using conventional free radical polymerization. The three types of S/HSDR copolymer, with similar molecular weight and composition but different S/HSDR sequence distributions along each copolymer chain, were used as dispersed particles for a study of electrorheological (ER) suspensions. The characterization of each ER fluid as a function of controlled molecular structure in suspension showed different ER behaviors. In particular, the suspension of the S/HSDR gradient copolymer showed the greatest degree of enhancement in shear viscosity, by as much as a factor of 10, upon application of a 1700 kV/m electric field.     

Effect of high doses of a sustained-release bovine somatotropin on antibody formation in dairy cows.

Eighty-two lactating Holstein cows received either one, three, or five concurrent, intramuscular injections of a unit dose (.6 g) of zinc methionyl bST (some-tribove) or five doses of the vehicle. Injections were administered at 14-d intervals from 60 d postpartum until the end of lactation or necropsy. Thirty-eight cows continued on the same treatment for a 2nd yr. Blood bST antibodies developed within the first 7 wk of treatment, and the number of cows with anti-bST binding generally declined with time. Thirteen out of 59 cows receiving bST developed binding activity > 25% (positives) during the 1st yr. At the .6-g dose level, no binding was detected after wk 15. Seven of the 13 positive cows were among the group randomly selected to continue on study during yr 2. In the 2nd yr, only 2 out of 24 bST-treated cows were positive. Binding activity was associated with the IgG fraction in serum. Binding capacities of antibodies ranged from .625 to 3.04 mg of bST/L, and affinities ranged from 1.14 x 10(8) to 3.14 x 10(8) L/mol. Cows considered to be clinically positive had performance similar to those of their herdmates having binding < 25%. No evidence of a pathologic effect of antibodies existed in treated cows, their calves, or fetuses. The presence of anti-bST antibodies did not affect milk production of the cow or growth of the calves conceived during bST treatment.     

Traumatic brain injury: Psychological and medical factors related to rehabilitation outcome.

Examined the relationship of medical and psychological factors of adaptive physical functioning (APF) at discharge and length of rehabilitation stay following traumatic brain injury. 32 Ss (aged 16–55 yrs) with severe traumatic brain injury underwent interdisciplinary rehabilitation evaluations, including the MMPI, WAIS, and the Wechsler Memory Scale, at admission to and discharge from an inpatient rehabilitation program. Results suggest that the actual status of APF at discharge was related to initial assessments of medical, not psychological, factors. However, psychological factors were related to relative improvement in APF when change occurred. Even Ss who were minimally aware of their physical abilities and limitations at admission improved in their APF during treatment. Length of rehabilitation stay was determined by both physical and psychological functioning. (13 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sub-micron dispersed-phase particle size in polymer blends: overcoming the Taylor limit via solid-state shear pulverization

A comparison was made of the fineness of dispersion in immiscible polymer blends achieved by a continuous mechanical alloying technique, solid-state shear pulverization, relative to that achieved by melt mixing. Two polymer blend systems were investigated. A polystyrene (PS)/polyethylene (PE) wax blend was studied because, based on a classic analysis by G.I. Taylor, melt mixing was expected to yield a number-average dispersed-phase domain size, D_n, well above 1 μm. A PS/high density polyethylene (HDPE) blend was also studied because it was known to produce a sub-micron number-average dispersed-phase particle size when mixed by twin-screw extrusion. In the case of the PS/PE wax blend at compositions ranging from 1 to 15 wt% polyethylene wax, pulverization resulted in nearly identical D_n values (typical value of 0.7 μm) independent of minor-phase content; these D_n values were an order of magnitude smaller than the anticipated Taylor limit for melt-mixed blends. In contrast, PS/PE wax blends made by batch, intensive melt mixing yielded D_n values between ∼3 μm at both 1 and 5 wt% minor-phase content and 17.5 μm at 15 wt% minor-phase content. The increase in D_n with increasing dispersed-phase content in the melt-mixed blend is a consequence of coalescence present during melt processing; such effects are disallowed in the pulverization process occurring in the solid state. Scanning electron microscopy of a 95/5 wt% PS/HDPE blend provided D_n values of 500 and 270 nm in the twin-screw extruded and pulverized samples, respectively. Fractionated crystallization studies further corroborated the ability of pulverization to result in a finer, nanoscopic dispersion of the minor phase as compared to extrusion.     

Achievement of quasi-nanostructured polymer blends by solid-state shear pulverization and compatibilization by gradient copolymer addition

Nanoblends, in which dispersed-phase domains exhibit length scales of order 100 nm or less, are made using a continuous, industrially scalable, mechanical process called solid-state shear pulverization (SSSP). An 80/20 wt% polystyrene (PS)/poly(methyl methacrylate) (PMMA) blend processed by SSSP and consolidated by platen pressing, without melt processing, exhibits a quasi-nanostructured morphology with many irregular, minor-phase domain sizes of ∼100 nm or less. After short-residence-time single-screw extrusion, the pulverized blend exhibits spherical dispersed-phase domains with a number-average diameter of 155 nm. Thus, SSSP followed by certain melt-processing operations can yield nanoblends. However, the pulverized blend exhibits significant coarsening of the dispersed-phase domains during long-term, high-temperature static annealing, indicating that SSSP followed by other melt processes may yield microstructured blends. In order to suppress coarsening, a styrene (S)/methyl methacrylate (MMA) gradient copolymer is synthesized by controlled radical polymerization. When 5 wt% S/MMA gradient copolymer is added to the PS/PMMA blend during SSSP, the resulting blend exhibits a nanostructure nearly identical to that of the blend without gradient copolymer, and coarsening is nearly totally suppressed during long-term, high-temperature static annealing. Thus, SSSP with gradient copolymer addition can yield compatibilized nanoblends. Morphologies obtained in the pulverized PS/PMMA nanoblend are compared with those in blends of PS/poly(n-butyl methacrylate) and PS/high-density polyethylene made using identical SSSP conditions, providing for commentary on the ability of SSSP to produce nanostructured blends as a function of blend components.     

Well-mixed blends of HDPE and ultrahigh molecular weight polyethylene with major improvements in impact strength achieved via solid-state shear pulverization

Compared with conventional polyolefins, ultrahigh molecular weight polyethylene (UHMWPE) possesses outstanding impact strength and crack resistance that make it desirable for a wide variety of applications. Unfortunately, UHMWPE has an ultrahigh viscosity that renders common, continuous melt-state processes ineffective for making UHMWPE products. Attempts to overcome this problem by blending UHMWPE with lower molecular weight high-density polyethylene (HDPE) by melt processing have typically led to poorly dispersed blends due to the vast viscosity mismatch between blend components. Here, we present solid-state shear pulverization (SSSP) as a mild, continuous, and simple approach for achieving effective and intimate mixing in UHMWPE/HDPE blends. These SSSP blends are easily processed by post-SSSP melt extrusion; for an SSSP blend with 50 wt% UHMWPE, we observe more than a factor of 1000 increase in viscosity at a shear rate of 0.01 s⁻¹ but less than a factor of 5 increase at 100 s⁻¹, the latter being more typical of melt-processing operations. Using extensional rheology, we confirm the strain hardening behavior of SSSP blends. Shear rheology and crystallization data show that the mixing between UHMWPE and HDPE can be improved with subsequent passes of SSSP and single-screw extrusion. Finally, we show that blending via SSSP leads to dramatic improvements in impact strength: as compared to literature results, injection-molded sample bars made from SSSP blends with 30–50 wt% UHMWPE exhibit very high values of notched Izod impact strength, 660–770 J/m (the impact strength of neat HDPE was 170 J/m).     

CMOS on-chip clock for digital signal processors

An on-chip clock for frequencies up to 190 MHz is presented. This clock generator can be used for application specific digital signal processors which are clocked faster than the off-chip system clock. It is useful for both processors with a few cycles per sample or for high frequency bit-serial processors which need a large number of cycles.<>