Piezoelectric properties of PVDF-conjugated polymer nanofibers

This study presents the development and characterization of PVDF-conjugated polymer nanofiber-based systems. Five different conducting polymers (CPs) were synthesized successfully and used to create the nanofiber systems. The CPs used are polyaniline (PANI), polypyrrole (PPY), polyindole (PIN), polyanthranilic acid (PANA), and polycarbazole (PCZ). Nanofiber systems were produced utilizing the Forcespinning® technique. The nanofiber systems were developed by mechanical stretching. No electrical field or post-process poling was used in the nanofiber systems. The morphology, structure, electrochemical and piezoelectric performance was characterized. All of the nanofiber PVDF/CP systems displayed higher piezoelectric performance than the fine fiber PVDF systems. The PVDF/PPY nanofiber system displays the highest piezoelectric performance of 15.56 V. The piezoelectric performance of the PVDF/CP nanofiber systems favors potential for an attractive source of energy where highly flexible membranes could be used in power actuators, sensors and portable, and wireless devices to mention some.     

Liquid flow in molds with prelocated fiber mats

The mechanism associated with mold filling in the manufacture of structural RIM (SRIM) and resin transfer molding (RTM) composites is studied by means of flow visualization and pressure drop measurements. To facilitate this study, an acrylic mold with a variable cavity was constructed and the flow patterns of nonreactive fluid flowing through various layers, types, and combinations of preplaced glass fiber reinforcement mats were photographed for both evacuated and nonevacuated molds. The pressure drops in the flow through a single type of reinforcement (e.g., a continuous strand random fiber mat) and also a combination of reinforcement types (e.g., a stitched bidirectional mat in combination with a random fiber mat) were recorded at various flow rates to simulate high-speed feeding processes (e.g., SRIM) and low-speed feeding processes (e.g., RTM). By changing the amount of reinforcement placed into the mold, the permeabilities of the different types and combinations of glass fiber mats were obtained as a function of porosity. It is shown that partially evacuating the mold cavity decreases the size of bubbles or voids in the liquid, but ultimately increases the maximum pressure during filling. The results also show that glass fiber mats exhibit anisotropic permeabilities with the thickness permeability, K_z, being extremely important and often the determining factor in the pressure generated in the mold during filling.     

SR-30 turbojet engine real-time sensor health monitoring using neural networks,and Bayesian belief networks

This paper describes the use of artificial intelligence-based techniques for detecting and isolating sensor failures in a turbojet engine. Specifically, three artificial intelligence (AI) techniques are employed: artificial neural networks (NNs), statistical expectations, and Bayesian belief networks (BBNs). These techniques are combined into an overall system that is capable of distinguishing between sensor failure and engine failure—a critical capability in the operation of turbojet engines. The turbojet engine used in this study is an SR-30 developed by Turbine Technologies. Initially, NNs were designed and trained to recognize sensor failure in the engine. The increased random noise output from failing sensors was used as the key indicator. Next, a Bayesian statistical method was used to recognize sensor failure based on the bias error occurring in the sensors. Finally, a BBN was developed to interpret the results of the NN and statistical evaluations. The BBN determines whether single or multiple sensor failures signify engine failure, or whether sensor failures represent separate, unrelated incidences. The BBN algorithm is also used to distinguish between bias and noise errors on sensors used to monitor turbojet performance. The overall system is demonstrated to work equally well during start-up and main-stage operation of the engine. Results show that the method can efficiently detect and isolate single or multiple sensor failures within this dynamic environment.     

Managing to be ethical: debunking five business ethics myths

In the aftermath of recent corporate scandals, managers and researchers have turned their attention to questions of ethics management. We identify five common myths about business ethics and provide responses that are grounded in theory, research, and business examples. Although the scientific study of business ethics is relatively new, theory and research exist that can guide executives who are trying to better manage their employees' and their own ethical behavior. We recommend that ethical conduct be managed proactively via explicit ethical leadership and conscious management of the organization's ethical culture.     

Callosities, corns, and calluses

Inappropriate shoes, abnormal foot mechanics, and high levels of activity produce pressure and friction that lead to corns and calluses. Most lesions can be managed conservatively by proper footwear, orthoses, and, if necessary, regular paring. The lesions usually disappear when the causative mechanical forces are removed. Surgery is rarely indicated and should be specifically aimed at correcting the abnormal mechanical stresses.     

Effect of renal sympathetic nerve stimulation on proximal water and sodium reabsorption

The renal responses to sympathetic nerve stimulation were studied in saline-expanded rats. The left kidney was partially denervated by crushing the left greater splanchnic nerve. Then the distal portion of the nerve was stimulated with square wave pulses of 0.5 ms duration, voltage twice threshold, and 1 or 2 Hz frequency while monitoring the compound action potential. Fibers with conduction speeds of 13-17 m-s-1 and of 0.7-1 m-s-1 were identified. Only stimulation of the latter appeared to produce changes in renal Na and water excretion. Whole kidney and individual nephron studies were performed alternating control and nerve stimulation periods. Nerve stimulation produced approximately a 25% reduction of the left kidney urine volume and sodium excretion. Glomerular filtration rate and renal plasma flow remained unchanged. Right kidney Na and water excretion, glomerular filtration rate, and renal plasma flow remained constant. In the left kidney, during nerve stimulation, the tubular fluid to plasma inulin concentration ratio increased significantly in the late proximal tubule. We conclude that the antidiuresis and antinatriuresis seen during sympathetic nerve stimulation were caused by increased sodium and water reabsorption in the proximal tubule, probably mediated by the stimulation of slowly conducting unmyelinated fibers. These responses appeared to be unrelated to systemic or intrarenal hemodynamic changes.     

Simultaneous bleaching of vital teeth and an open-chamber nonvital tooth with 10% carbamide peroxide

OBJECTIVE: The purpose of this study was to evaluate the effectiveness of bleaching a nonvital tooth with an open pulp chamber while simultaneously bleaching the other vital teeth with 10% carbamide peroxide. METHOD AND MATERIALS: Ten discolored nonvital teeth were treated. Each nonvital tooth was prepared as in the conventional "walking bleaching" fashion, so that the gutta-percha was sealed from the pulp chamber. The 10% carbamide peroxide was injected into the chamber of the nonvital tooth and loaded into the custom-fitted tray for all teeth. The nonvital teeth were bleached from both the inside and the outside. The patient closed the orifice with a cotton pellet during the day and changed the cotton pellet after meals. The patient applied fresh solution nightly. RESULTS: All teeth were successfully lightened. The time required to lighten the nonvital tooth was related to the duration of the discoloration. CONCLUSION: With proper patient selection and education, this technique can provide an effective way to lighten nonvital and vital teeth simultaneously, especially where extended treatment time may be required for difficult discolorations.     

Circularly symmetric light scattering from nanoplasmonic spirals

In this paper, we combine experimental dark-field imaging, scattering, and fluorescence spectroscopy with rigorous electrodynamics calculations in order to investigate light scattering from planar arrays of Au nanoparticles arranged in aperiodic spirals with diffuse, circularly symmetric Fourier space. In particular, by studying the three main types of Vogel's spirals fabricated by electron-beam lithography on quartz substrates, we demonstrate polarization-insensitive planar light diffraction in the visible spectral range. Moreover, by combining dark-field imaging with analytical multiparticle calculations in the framework of the generalized Mie theory, we show that plasmonic spirals support distinctive structural resonances with circular symmetry carrying orbital angular momentum. The engineering of light scattering phenomena in deterministic structures with circular Fourier space provides a novel strategy for the realization of optical devices that fully leverage on enhanced, polarization-insensitive light-matter coupling over planar surfaces, such as thin-film plasmonic solar cells, plasmonic polarization devices, and optical biosensors.     

Interphase of polyoctenamer-single-wall carbon nanotubes by thermogravimetric analysis in air

Non-isothermal thermogravimetric analysis in air, of polyoctenamer-single wall carbon nanotubes (PO-SWNTs), loaded by various amounts of SWNTs up to 10% wt., at different heating rates (ranging from 5 to 40°C/min) is reported. The thermal degradation in the air of PO_SWNTs is dominated by a main single sigmoidal dependence, assigned to the polymer and eventually polymer-nanofiller interphase, over which a weaker sigmoid assigned to the thermo-oxidative degradation of the nanofiller is superimposed at higher temperatures. The temperature at which the nanocomposite's residual mass fraction reaches x% wt. of the initial mass, T_x%, is reported (for x = 5, 50, and 85). The dependence of T_x% on the heating rate and the loading by nanotubes is analyzed. The temperature derivative of the thermograms defines new parameters (inflection residual mass fraction and inflection temperature) and (degradation) width. Their dependence on the loading by SWNTs was reported. Estimation of the interphase in polymer-based nanocomposites is based on the postulate that the dependence of the inflection temperature on the composition of the nanocomposite obeys a Fox-like dependence, where the bulk polymer and the polymer trapped within the interphase are considered as a blend of two miscible polymers. Complementary Raman, x-ray diffraction, and differential scanning calorimetry support these results.