Analysis of the mechanism of die soldering in aluminum die casting

A mechanism of soldering of an aluminum alloy die casting to a steel die is proposed. A soldering critical temperature is postulated, at which iron begins to react with aluminum to form an aluminum-rich liquid phase and solid intermetallic compounds. The liquid joins the die with the casting upon solidification. The critical temperature is determined by the elements in both the casting alloy and the die material and is equal to the solidus temperature of the resulting alloy. The critical temperature is used to predict the onset of die soldering, and the local liquid fraction is related to the soldering tendency. Experiments have been carried out to validate the concept and to determine the critical temperature for die soldering in an iron-aluminum system. Thermodynamic calculations are used to determine the critical temperature and soldering tendency for the cases of pure aluminum and a 380 alloy in a steel mold. Factors affecting the soldering tendency are discussed, and methods for reducing die soldering are suggested.     

A Low-Supply-Voltage CMOS Sub-Bandgap Reference

A low-power (21 $muhbox{W}$ ) bandgap reference source that is operable from a nominal supply voltage of 1.4 V is described. The circuit provides an output voltage equal to the bandgap voltage having a low output resistance and allows resistive loading. It does not use resistors or operational amplifiers. Thus, the design is suitable for fabrication in any digital CMOS technology. The circuit uses a current conveyor and current mirrors to convert the proportional to absolute temperature voltage into a current using a MOSFET. The current is converted back to a voltage by using the functional inverse of the FET $v-i$ characteristics. This makes the voltage gain linear and temperature independent. The absence of back-gate bias is the reason for achieving the low supply voltage of operation. Simulation results using the transistor models for the 0.18-$mu$m TSMC process show that the voltage-variation over the temperature range 0 to 100 $^{circ} {hbox {C}}$ is $≪$1 mV.      

Catalytic reduction of N2O with CH4 and C3H6 over Ag–Rh/Al2O3 bimetallic catalyst in the presence of oxygen

A study of nitrous oxide (N₂O) reduction with methane (CH₄) and propene (C₃H₆) in the presence of oxygen (5%) over Ag/Al₂O₃, Rh/Al₂O₃ and Ag–Rh/Al₂O₃ catalysts, with Ag and Rh loadings of 5 wt% and 0.05 wt% respectively, has been performed. From the results, it was observed that the Ag–Rh bimetallic catalyst was the most active for both nitrous oxide removal (more than 95%) and hydrocarbon oxidation. This high activity seems to be connected with a synergistic effect between Ag and Rh. The findings from X‐ray diffraction and X‐ray photoelectron spectroscopy studies showed also, that there were no strong interactions (eg alloying) between Ag and Rh. Copyright © 2005 Society of Chemical Industry     

Prostate enlargement in mice due to fetal exposure to low doses of estradiol or diethylstilbestrol and opposite effects at high doses

On the basis of results of studies using high doses of estrogens, exposure to estrogen during fetal life is known to inhibit prostate development. However, it is recognized in endocrinology that low concentrations of a hormone can stimulate a tissue, while high concentrations can have the opposite effect. We report here that a 50% increase in free-serum estradiol in male mouse fetuses (released by a maternal Silastic estradiol implant) induced a 40% increase in the number of developing prostatic glands during fetal life; subsequently, in adulthood, the number of prostatic androgen receptors per cell was permanently increased by 2-fold, and the prostate was enlarged by 30% (due to hyperplasia) relative to untreated males. However, as the free serum estradiol concentration in male fetuses was increased from 2- to 8-fold, adult prostate weight decreased relative to males exposed to the 50% increase in estradiol. As a model for fetal exposure to man-made estrogens, pregnant mice were fed diethylstilbestrol (DES) from gestation days 11 to 17. Relative to controls, DES doses of 0.02, 0.2, and 2.0 ng per g of body weight per day increased adult prostate weight, whereas a 200-ng-per-g dose decreased adult prostate weight in male offspring. Our findings suggest that a small increase in estrogen may modulate the action of androgen in regulating prostate differentiation, resulting in a permanent increase in prostatic androgen receptors and prostate size. For both estradiol and DES, prostate weight first increased then decreased with dose, resulting in an inverted-U dose-response relationship.     

Evolution of multiprotocol label switching

Multiprotocol label switching (MPLS) is rapidly emerging as an Internet Engineering Task Force (IETF) standard intended to enhance the speed, scalability, and service provisioning capabilities in the Internet. MPLS uses the technique of packet forwarding based on labels, to enable the implementation of a simpler high-performance packet forwarding engine. This also decouples packet forwarding from routing, facilitating the provision of varied routing services independent of the packet forwarding paradigm. The authors track the evolution of this technology in relation to other existing technologies. Then an overview of the MPLS architecture and design is provided. In addition, some of the work that was a precursor to MPLS is discussed, as well as related issues and debates     

Childhood thyroid cancer. Characteristics and long-term outcome in children irradiated for benign conditions of the head and neck

OBJECTIVE: To determine the characteristics and long-term outcome of radiation-induced thyroid cancer in children. DESIGN: Retrospective review of a cohort of 4296 irradiated patients who received childhood radiation treatment to the head and neck area at the same hospital. PATIENTS: Forty-one children who were younger than 20 years when thyroid cancer developed in them and 77 adults in whom thyroid cancer developed. All 118 cases were diagnosed before 1974 and were followed up for a median of 19.4 years. RESULTS: Children presented with clinically palpable lymph nodes more often than adults (30.7% vs 15.1%, P = .05) and had more recurrences (39% vs 16%, P = .05). Despite these frequent recurrences, only one patient (an adult) died of thyroid cancer. Seventy percent of the recurrences occurred during the first 10 years of follow-up, but recurrences continued after 20 years. The adults had previously identified factors that predicted the risk of recurrences, but none could be identified in the children. CONCLUSION: The presentation and relatively good outcome of radiation-induced thyroid cancer in children is similar to that in nonirradiated children. Frequent and late recurrences call for lifelong follow-up.     

Modeling the tensile properties in β-processed α/β Ti alloys

The development of a set of computational tools that permit microstructurally based predictions for the tensile properties of commercially important titanium alloys, such as Ti-6Al-4V, is a valuable step toward the accelerated maturation of materials. This paper will discuss the development of neural network models based on a Bayesian framework to predict the yield and ultimate tensile strengths of Ti-6Al-4V at room temperature. The development of such rules-based model requires the population of extensive databases, which in the present case are microstructurally based. The steps involved in database development include producing controlled variations of the microstructure using novel approaches to heat treatments, the use of standardized stereology protocols to characterize and quantify microstructural features rapidly, and mechanical testing of the heat-treated specimens. These databases have been used to train and test neural network models for prediction of tensile properties. In addition, these models have been used to identify the influence of individual microstructural features on the tensile properties, consequently guiding the efforts toward development of more robust mechanistically based models. Based on the neural network model, it is possible to investigate the influence of individual microstructural features on the tensile properties, and in certain cases these dependencies can point toward unrecognized phenomena. For example, the apparently unexpected trend of increase in tensile strength with increasing prior β-grain size has led to the determination of the pronounced role of the basketweave microstructure in strengthening these alloys, especially in case of larger prior β grains. This article is based on a presentation made in the symposium “Computational Aspects of Mechanical Properties of Materials,” which occurred at the 2005 TMS Annual Meeting, February 13–17, 2005, in San Francisco, CA, under the auspices of the MPMD-Computational Materials Science & Engineering (Jt. ASM-MSCTS) Committee.     

Continuity and change: past experience as adaptive repertoire in occupational adaptation

Narratives are gaining recognition as important ways occupational therapists and other clinicians can think about the life stories of clients. The purpose of this article is to examine a conceptualization of how changes from one chapter to another occur in life stories, using the metaphor of an adaptive repertoire, and to consider how this notion can be useful in helping clients maintain continuity and a coherent life story in times of change. Three premises based on the concept of adaptation address (a) configurations of occupational forms embedded in particular local worlds, (b) cumulative development of an adaptive repertoire that allows one to perform both competently and appropriately, and (c) adaptive transitions and application of one's repertoire to new circumstances. Implications for research and clinical practice in occupational therapy also are examined.