Fetal and maternal lipoprotein metabolism in human pregnancy complicated by type I diabetes mellitus

Serum lipid, apolipoprotein concentration, and lipoprotein composition were determined in maternal and umbilical venous cord blood at delivery by elective Cesarean section (CS) in 10 singleton, full-term pregnancies with maternal insulin-dependent diabetes mellitus (type I DM), which predated pregnancy, and in 22 nondiabetic pregnancies. The objectives of the study were to determine the influence of maternal type I DM, and hence potential fetal overnutrition on fetal lipid metabolism. There were no significant differences in gestational age, fetal weight, or fetal serum insulin concentration between the type I DM group and those with nondiabetic pregnancies, although fetal venous cord blood glucose was 3.4 mmol/L (3.0-4.5 mmol/L) (median and 25th-75th percentiles) and 2.9 mmol/L (2.0-3.4 mmol/L), respectively, and maternal Hemoglobin A1c [9.6% (8.2-10.7%) and 6.8% (6.3-7.8%), respectively], was significantly greater in the type I DM subjects (P < 0.02 and 0.002 respectively). Plasma nonesterified fatty acid (NEFA) concentrations were lower in the type I DM mothers [0.85 mmol/L (0.56-2.31 mmol/L) compared with 1.14 mmol/L (0.88-1.24 mmol/L] in nondiabetic pregnancies; P < 0.0001). Serum high-density lipoprotein phospholipids (HDL-PL) were increased in type I DM mothers because of elevated HDL2 phospholipid [0.39 mmol/L (0.27-0.48 mmol/L) compared with 0.12 mmol/L (0.06-0.21 mmol/L), respectively, P < 0.01). The maternal HDL cholesterol (C) concentration was not significantly different in the uncomplicated and type I DM pregnancies. However, in the umbilical venous cord blood, serum levels of NEFA [0.49 mmol/L (0.33-1.29 mmol/L) in type I DM compared with 0.13 mmol/L (0.06-0.33 mmol/L) in nondiabetics; P < 0.02)], total cholesterol (TC) [2.87 mmol/L (1.65-4.86 mmol/L) in type I DM compared with 1.65 mmol/L (1.46-1.87 mmol/L) in nondiabetics; P < 0.02]; free cholesterol (FC) [0.97 mmol/L (0.60-1.26 mmol/L) in type I DM compared with 0.62 mmol/L (0.37-0.75 mmol/L) in nondiabetics; P < 0.05), and cholesteryl ester (CE) [1.90 mmol/L (1.44-3.33 mmol/L) in type I DM compared with 1.01 mmol/L (0.83-1.24 mmol/L) in nondiabetics; P < 0.02), triglyceride (TG) (1.06 [0.50-1.91) mmol/L in type I DM compared with 0.29 [0.25-0.36] mmol/l in nondiabetics; P < 0.001), phospholipid (PL) (2.52 [1.73-3.03) mmol/L in type I DM compared with 1.34 [1.27-1.48] mmol/L in nondiabetics; P < 0.01], and the apolipoproteins A-I and B had significantly higher concentrations in type I DM. In umbilical venous cord blood, ratios of HDL-TC and HDL-PL to apo AI, reflecting the lipid content of HDL, were reduced when the mother had type I DM during pregnancy (P < 0.02 and P < 0.0001, respectively). These results indicate that maternal type I DM may lead to a fetal serum lipoprotein composition more closely resembling that seen in the adult. In type I DM, maternal TG and PL and fetal TC, TG, PL, CE, and FC were correlated to NEFA levels (P < 0.05), but not to glucose, insulin secretion, or maternal control of type I DM. These data suggest that the enhanced supply of NEFA to the fetus in type I DM pregnancies may drive the synthesis of cholesterol as well as TGs and PLs.     

High‐order Higdon‐like boundary conditions for exterior transient wave problems

Recently developed non‐reflecting boundary conditions are applied for exterior time‐dependent wave problems in unbounded domains. The linear time‐dependent wave equation, with or without a dispersive term, is considered in an infinite domain. The infinite domain is truncated via an artificial boundary ??, and a high‐order non‐reflecting boundary condition (NRBC) is imposed on ??. Then the problem is solved numerically in the finite domain bounded by ??. The new boundary scheme is based on a reformulation of the sequence of NRBCs proposed by Higdon. We consider here two reformulations: one that involves high‐order derivatives with a special discretization scheme, and another that does not involve any high derivatives beyond second order. The latter formulation is made possible by introducing special auxiliary variables on ??. In both formulations the new NRBCs can easily be used up to any desired order. They can be incorporated in a finite element or a finite difference scheme; in the present paper the latter is used. In contrast to previous papers using similar formulations, here the method is applied to a fully exterior two‐dimensional problem, with a rectangular boundary. Numerical examples in infinite domains are used to demonstrate the performance and advantages of the new method. In the auxiliary‐variable formulation long‐time corner instability is observed, that requires special treatment of the corners (not addressed in this paper). No such difficulties arise in the high‐derivative formulation. Published in 2005 by John Wiley & Sons, Ltd.     

Development of a Position Sensitive Neutron Detector with High Efficiency and Energy Resolution for Use at High-Flux Beam Sources

We are developing a high-efficiency neutron detector with 1 cm position resolution and coarse energy resolution for use at high-flux neutron source facilities currently proposed or under construction. The detector concept integrates a segmented ³He ionization chamber with the position sensitive, charged particle collection methods of a MicroMegas detector. Neutron absorption on the helium produces protons and tritons that ionize the fill gas. The charge is amplified in the field region around a wire mesh and subsequently detected in current mode by wire strips mounted on a substrate. One module consisting of a high-voltage plate, a field-shaping high-voltage plate, a grid and wire strips defines a detection region. For 100 % efficiency, detector modules are consecutively placed along the beam axis. Analysis over several regions with alternating wire strip orientation provides a two-dimensional beam profile. By using ³He, a 1/v absorption gas, each axial region captures neutrons of a different energy range, providing an energy-sensitive detection scheme especially useful at continuous beam sources.     

Group Study of Simulated Driving fMRI Data by Multiset Canonical Correlation Analysis

In this work, we apply a novel statistical method, multiset canonical correlation analysis (M-CCA), to study a group of functional magnetic resonance imaging (fMRI) datasets acquired during simulated driving task. The M-CCA method jointly decomposes fMRI datasets from different subjects/sessions into brain activation maps and their associated time courses, such that the correlation in each group of estimated activation maps across datasets is maximized. Therefore, the functional activations across all datasets are extracted in the order of consistency across different dataset. On the other hand, M-CCA preserves the uniqueness of the functional maps estimated from each dataset by avoiding concatenation of different datasets in the analysis. Hence, the cross-dataset variation of the functional activations can be used to test the hypothesis of functional-behavioral association. In this work, we study 120 simulated driving fMRI datasets and identify parietal-occipital regions and frontal lobe as the most consistently engaged areas across all the subjects and sessions during simulated driving. The functional-behavioral association study indicates that all the estimated brain activations are significantly correlated with the steering operation during the driving task. M-CCA thus provides a new approach to investigate the complex relationship between the brain functions and multiple behavioral variables, especially in naturalistic tasks as demonstrated by the simulated driving study.     

Finite satisfiability for guarded fixpoint logic

The finite satisfiability problem for guarded fixpoint logic is decidable and complete for 2ExpTime (resp. ExpTime for formulas of bounded width).     

National geodatabase of tidal stream power resource in USA

A geodatabase of tidal constituents is developed to present the regional assessment of tidal stream power resource in the USA. Tidal currents are numerically modeled with the Regional Ocean Modeling System (ROMS) and calibrated with the available measurements of tidal current speeds and water level surfaces. The performance of the numerical model in predicting the tidal currents and water levels is assessed by an independent validation. The geodatabase is published on a public domain via a spatial database engine with interactive tools to select, query and download the data. Regions with the maximum average kinetic power density exceeding 500 W/m² (corresponding to a current speed of ～1 m/s), total surface area larger than 0.5 km² and depth greater than 5 m are defined as hotspots and documented. The regional assessment indicates that the state of Alaska (AK) has the largest number of locations with considerably high kinetic power density, followed by, Maine (ME), Washington (WA), Oregon (OR), California (CA), New Hampshire (NH), Massachusetts (MA), New York (NY), New Jersey (NJ), North and South Carolina (NC, SC), Georgia (GA), and Florida (FL).     

Field Performance of High Oleic Soybeans with Mutant FAD2-1A and FAD2-1B Genes in Tennessee

Soybean [Glycine max (L.) Merr.] oil with high oleic acid (>75%) has increased oxidative stability and health benefits that are valuable for food, fuel, and industrial products. It has been determined that two naturally occurring mutations in genes FAD2-1A and FAD2-1B can combine to produce high oleic soybeans. The objective of this study was to test the effect of these mutant alleles on seed yield and oil and protein concentration. Molecular markers assisted in the creation of a population of 48 BC₃F_2:4 lines (93.75% expected genome commonality). Each line was classified into one of four genotypic groups where both FAD2-1A and FAD2-1B genes were either homozygous wild type or mutant, respectively. Twelve lines for each genotypic group were evaluated in three replications at six locations across Tennessee. There was no seed yield difference between the high oleic genotypic group and the other groups (P < 0.05). On the other hand, there were differences in fatty acid profiles and oil and protein concentrations. In combination, the mutant FAD2-1A and FAD2-1B alleles produced a mean of 803.1 g kg⁻¹ oleic acid. This is, on average, approximately 500 g kg⁻¹ more oleic acid compared to soybean lines with only one mutant FAD2-1 allele. The high oleic double mutant group had more total oil (228.0 g kg⁻¹) and protein (401.0 g kg⁻¹) compared to all other genotypic groups (P < 0.05). Overall, this specific combination of mutant FAD2-1A and FAD2-1B alleles appears to generate conventional high oleic soybeans without a yield drag.     

Radiation-curable carbon fiber prepreg composites

Radiation processing is the utilization of ionizing radiation, usually photons or electron beams, to produce useful physical and chemical changes in a material. A potential application for electron beam processing for composite manufacturing is for curing carbon fiber prepregs. These prepregs, carbon fibers or fabrics preimpregnated with liquid polymer resin, are commonly used in the aircraft industry. Their use, however, can be time consuming and labor intensive. The advantages of radiation curing over thermal or chemical curing methods include improved rate control, reduced curing times, and curing at ambient temperature. There is no need for chemical initiators. A radiation-curable prepreg has been designed to meet the mechanical and physical property specifications of a leading aircraft manufacturing company. The resin is a mixture of an expoxy diacrylate, polybutadiene diacrylate, and a multifunctional monomer. This resin was used to impregnate a plain weave carbon fabric, at a loading of 35 percent (by mass), using a solvent process. Preliminary characterization studies show that the cured polymer produced by irradiation in air to a dose of 40 kGy is amorphous with a maximum gel fraction of 85 percent. The softening point of the polymer varied from 228°C (30-kGy sample) to 237°C (50-kGy sample). The linear thermal expansion coefficient of the polymer was 1.7 × 10⁻⁴ m/m°C from 25°C to 150°C and was unaffected by varying the applied dose from 30 to 50 kGy.