A cost comparison of balloon angioplasty and stenting versus endarterectomy for the treatment of carotid artery stenosis

PURPOSE: Percutaneous transluminal angioplasty with stenting (PTAS) of the carotid artery has been advocated as an alternative treatment for high-grade stenosis. Rationale for this approach includes less morbidity, shorter recovery, and lower cost when compared with carotid endarterectomy (CEA). METHODS: The clinical results and hospital charges of patients who underwent elective treatment for carotid stenosis were reviewed. During a concurrent 14-month period, 218 patients were admitted 229 times for 234 procedures for the treatment of 239 carotid bifurcation stenoses, 109 by PTAS and 130 by CEA. Hospital charges were reviewed for each hospitalization and were categorized according to radiology, operating room, cardiac catheterization laboratory, and all other hospital charges. RESULTS: The combined incidence of postprocedure strokes and deaths were: PTAS, eight strokes (7.7%) and one death (0.9%); CEA, two strokes (1.5%) and two deaths (1.5%). Total hospital charges per admission for the two groups were $30,140 for PTAS and $21,670 for CEA. The average postprocedure length of stay for PTAS was 2.9 days (median, 2 days) and for CEA was 3.1 days (median, 3 days). Cardiac catheterization laboratory charges for the PTAS group were $12,968, whereas the operating room charges for the CEA group were $4263. When hospitalizations that were extended by complications were excluded, the average total charges for the PTAS group (n = 84) dropped to $24,848 (mean length of stay, 1.9 days) and for the CEA group (n = 111) to $19,247 (mean length of stay, 2.6 days). CONCLUSIONS: After evaluating hospital charges, PTAS for the treatment of carotid stenosis cannot currently be justified on the basis of reduced costs alone. With future cost-containing measures, total hospital charges can be reduced in both groups.     

Effect of acute increases in filtered HCO3- on renal hydrogen transporters: II. H(+)-ATPase

Adaptive increases in renal bicarbonate reabsorption occur in response to acute increases in filtered bicarbonate (FLHCO3). In a previous study, we showed that an increase in FLHCO3 induced by plasma volume expansion increased the Vmax for Na+/H+ exchange activity in renal cortical brush border membrane vesicles (BBMV), providing a potential mechanism for the adaptive increase in HCO3- reabsorption. The present studies were undertaken to determine whether the increase in FLHCO3 induced by plasma expansion also stimulates the other major H+ transporter in cortical BBMV, the H(+)-ATPase. H(+)-ATPase activity was assessed in BBMV obtained from hydropenic and plasma expanded Munich-Wistar rats, using a NADH-linked ATPase assay. H(+)-ATPase activity was measured as the ouabain and oligomycin-insensitive, bafilomycin A1-sensitive component of total ATPase activity. Acute plasma expansion doubled single nephron FLHCO3, and this change was associated with a 64% increase in the Vmax for H(+)-ATPase activity, with no change in apparent Km. The Vmax for H(+)-ATPase activity correlated directly with whole kidney GFR and FLHCO3 (r = 0.68 and 0.72, respectively), and with single nephron GFR and FLHCO3 (r = 0.76 and 0.80, respectively). Thus, the mechanism for the adaptive increase in proximal tubular HCO3- reabsorption that occurs in response to acute increases in FLHCO3 appears to be related to increased activity of both H(+)-ATPase and Na+/H+ exchange in the apical membrane of the proximal tubule epithelium.     

裂缝性油气藏采收率：100个裂缝性油气田实例的经验总结

通过对世界上100个裂缝性油气藏的综合评价，研究储集层及流体本身的性质(包括孔隙度、渗透率、黏度、可动油比例、含水饱和度、润湿性及裂缝分布特征等)和驱动机制及油藏管理战略(优化日产量和采用不同类型的提高采收率技术)对其最终采收率的影响。将裂缝性油气藏分为4类：I类的基质几乎没有孔隙度和渗透率，裂缝是储存空间和流体流动的通道；Ⅱ类的基质有较低的孔隙度和渗透率，基质提供储存空间，裂缝提供流动通道；Ⅲ类(微孔隙)的基质具有高孔隙度和低渗透率，基质提供储存空间，裂缝提供流动通道；Ⅳ类(大孔隙)的基质具有高的孔隙度和渗透率，基质提供储存空间和流动通道，裂缝仅增加渗透率。对26个Ⅱ类油气藏和20个Ⅲ类油气藏的开采历史的研究表明：Ⅱ类油气藏的采收率受水驱强度和最优日产量控制，日产量过高会很容易破坏Ⅱ类油气藏，一些Ⅱ类油气藏如果管理得当，采收率可以很高，不需要二次或三次采油；Ⅲ类油气藏的采收率主要受岩石和流体本身性质的影响，特别是基质渗透率、流体重度、润湿性以及裂缝强度等，不进行二次或三次采油不可能完全开采，往往需要采用一些提高采收率的专门技术。以往将Ⅱ类和Ⅲ类裂缝性油气藏归为一类，认识它们的区别将有助于选择更好的开发策略。     

The Present Status and Potential of Kraft Lignin-Phenol-Formaldehyde Wood Adhesives

Kraft lignin (KL), a phenolic polymer formed during the kraft pulping process, is presently burned as a low value fuel. For decades, researchers have attempted to use KL as an inexpensive substitute for phenol in phenol-formaldehyde (PF) resins, but no one has produced a commercially satisfactory KL-PF resin. This paper reviews the literature on the present status of KL-PF adhesives and makes recommendations on needed research.

Kraft lignin solutions are complex mixtures which have broad molecular weight distributions, high viscosities, relatively low reactivities, and low solubilities. Attempts to overcome these inherent problems include methylolation of lignin to improve reactivity, the use of co-solvents to improve solubility, and ultrafiltration to yield more homogeneous molecular weight fractions. Future research efforts need to focus on understanding the fundamental chemical and physical properties of kraft lignin and its resins. The search for an economic lignin-based wood adhesive should continue.     

Cerebral protection by intermittent reperfusion during temporary focal ischemia in the rat

Temporary arterial occlusion has been routinely used as an adjunct in intracranial aneurysm surgery. This has commonly been performed using a protocol of multiple short periods of occlusion alternating with periods of restoration of normal circulation. Recently, the logical basis of this method has come under scrutiny. There is extensive experimental evidence to suggest that repetitive, brief periods of global ischemia may cause more severe cerebral injury than an equivalent single period of global ischemia. Only recently has this issue begun to be addressed with regard to focal ischemia. Hence, despite the common use of temporary clipping, little experimental data are available regarding the ischemic consequences of temporary arterial occlusion with periods of reperfusion versus uninterrupted temporary occlusion. To investigate this issue, a protocol of occlusion/reperfusion that simulates the temporal profile that occurs during surgery was performed in a rat model of focal ischemia. Sixteen anesthetized Sprague-Dawley rats were divided into two groups. The animals in Group I underwent 60 minutes of uninterrupted middle cerebral artery occlusion and the animals in Group II were subjected to six separate 10-minute occlusion periods with 5 minutes of reperfusion between occlusions. Histopathological analysis was performed 72 hours postischemia. Group I had significantly increased mean infarction volumes (50.0 +/- 12.1 mm3) compared to Group II (8.7 +/- 3.1 mm3) (p = 0.008). Injuries in Group I occurred in both the cortex and striatum, whereas Group II showed only striatal injuries. Furthermore, the extent of the injuries in Group II was less severe, characterized by ischemic neuronal injury rather than frank infarction. The results indicate that intermittent reperfusion is neuroprotective during temporary focal ischemia and support the hypothesis that intermittent reperfusion is beneficial if temporary clipping is required during aneurysm repair.     

Expression of matrix metalloproteinases and their inhibitors in aneurysms and normal aorta

BACKGROUND: Abdominal aortic aneurysms (AAAs) are characterized by degradation of collagen and elastin resulting from increases in matrix metalloproteinase (MMP) activity. Previous authors have identified isolated increases in expression of specific MMPs in AAAs, but none have compared relative levels of expression of particular MMPs to one another or to those of their inhibitors, the tissue inhibitors of metalloproteinases (TIMPs). This study proposes to quantify relative mRNA levels for interstitial collagenase (MMP-1), 72 kd type IV collagenase (MMP-2), 92 kd type IV collagenase (MMP-9), TIMP-1, and TIMP-2 in normal aorta (NA) and AAA to provide insight as to the relative importance of each in aneurysm formation. METHODS: Competitive polymerase chain reactions (PCRs) with gene-specific external standards and cDNA derived from AAAs (n = 8; mean age, 67.4 years) and NA (n = 5; mean age, 40.6 years) were used to quantify mRNA levels. Results were normalized to glyceraldehyde-3-phosphate dehydrogenase (GAPDH) mRNA levels, determined by means of competitive PCR, and compared by means of Mann-Whitney statistics. RESULTS: Significant increases in MMP mRNA expression in AAA over NA were observed for MMP-1 (3.64 versus 0.3, p = 0.007), MMP-9 (78.03 versus 3.35, p = 0.003), TIMP-1 (835.32 versus 477.2, p = 0.027), and TIMP-2 (18.09 versus 4.14, p = 0.003). The ratio of MMP to TIMP mRNA levels was higher in AAA than NA (0.135 versus 0.045, p = 0.018). CONCLUSIONS: Increases in expression of MMP-1, MMP-9, and MMP/TIMP ratios may result in increased proteolysis and matrix degradation, which characterize AAAs. MMP-9 appears to be the predominant metalloproteinase expressed in AAA, because its mRNA levels were more than 20 times and 2 times higher than those of MMP-1 and MMP-2, respectively. TIMP-1 mRNA levels were in molar excess to those of any of the metalloproteinases studied.     

GD3/proteosome vaccines induce consistent IgM antibodies against the ganglioside GD3

The gangliosides of melanoma and other tumours of neuroectodermal origin are suitable targets for immune intervention with tumour vaccines. The optimal vaccines in current use contain ganglioside plus bacillus Calmette-Guérin and induce considerable morbidity. We have screened a variety of new adjuvants in the mouse, and describe one antigen-delivery system, proteosomes, which is especially effective. Highly hydrophobic Neisserial outer membrane proteins (OMP) form multimolecular liposome-like vesicular structures termed proteosomes which can readily incorporate amphiphilic molecules such as GD3 ganglioside. The optimal GD3/proteosome vaccine formulation for induction of GD3 antibodies in the mouse is determined. Interestingly, the use of potent immunological adjuvants in addition to proteosomes augments the IgM and IgG antibody titres against OMP in these vaccines but GD3 antibody titres are unaffected. The application of proteosomes to enhance the immune response to GD3 extends the concept of the proteosome immunopotentiating system from lipopeptides to amphipathic carbohydrate epitopes such as cell-surface gangliosides. The demonstrated safety of meningococcal OMP in humans and the data in mice presented here suggest that proteosome vaccines have potential for augmenting the immunogenicity of amphipathic tumour antigens in humans.     

Cholesterol and lipoprotein(a) as risk factors for coronary heart disease in elderly subjects

The changes in lipoprotein(a) concentration that occur with age as a result of its association with an increased risk of coronary artery disease were investigated. Lipoprotein(a) concentrations were measured in serum samples from healthy volunteers, individuals with premature coronary artery disease, individuals with hyperlipidaemia but without evidence of premature coronary artery disease, and also in elderly men and women who had hyperlipidaemia. Concentrations in individuals with premature coronary artery disease were the same as those of the healthy volunteers, while in both these groups they were lower than those found in hyperlipidaemic elderly men and women, and those found in hyperlipidaemic women aged 36-68 years. No association between raised lipoprotein(a) concentration and mortality as a result of premature coronary artery disease was demonstrated. Raised lipoprotein(a) levels found in the hyperlipidaemic individuals also suggested that it may not be an independent risk factor.     

The use of Schottky barrier diodes for the detection of surface contamination and damage in the fabrication of GaAs MESFETS

The gates of GaAs MESFETS rely on the formation of a Schottky diode between the semiconductor surface and a deposited metal and so are extremely sensitive to the nature of this interface. For this reason an investigation of surface damage and contamination by the various processing stages involved in IC fabrication has been undertaken. This paper outlines the results obtained from processes involved in activation of ion implantation through annealing with a dielectric encapsulant, wet chemical etching, and metallization. Methods for removing or minimizing the effects of processing damage or contamination are also investigated.