Utilisation of attenuated total reflectance MIR and front-face fluorescence spectroscopies for the identification of Saint-Nectaire cheeses varying by manufacturing conditions

Twelve samples of cheeses (three types of Saint-Nectaire PDO cheeses and Savaron cheeses) differing by manufacturing and ripening conditions, from 12 different producers, were characterised by attenuated total reflectance mid-infrared (MIR) and front-face fluorescence spectroscopies, dynamic testing rheology and physico-chemical analysis. Fluorescence spectra (tryptophan residues, vitamin A and riboflavin) and MIR (3,000–2,800 (fat region), 1,700–1,500 (protein region) and 1,500–900 cm⁻¹ (fingerprint region)) spectra were recorded on cheese samples. The potential of the data tables was investigated for discriminating the four different groups of cheeses. The results of factorial discriminant analysis (FDA) performed on the fluorescence and mid-infrared spectra showed a good discrimination of the four cheese groups. Considering cross-validation results, the best classifications (100%) were achieved from mid-infrared and fluorescence spectra, while only 91.7 and 72.2% of correct classification were obtained by applying FDA to rheology and physico-chemical data, respectively. Spectroscopic techniques could provide useful fingerprints and allow the identification of investigated cheeses according to manufacturing conditions. Simple and rapid spectroscopic methods offer a promising approach to the authentication of cheeses.     

Replacing the ({beta}{alpha})-unit 8 of E.coli TIM with its chicken homologue leads to a stable and active hybrid enzyme

In order to investigate how structural modifications interferewith protein stability, we modified a (ß)-unit inE.coli triosephosphate isomerase (TIM), a typical (ß)-barrelprotein, assuming that the pseudosymmetrical ß-barrelcan be divided into eight successive loop/ß-strand/loop/-helixmotifs. We replaced the eighth (ß)-unit of E.coliTIM with the corresponding chicken (ß)-unit. The substitution,involving the replacement of 10 of the 23 residues of this (ß)-unit, was evaluated first by modelling, then experimentally.Modelling by bomology suggests how the amino add replacementsmight be accommodated in the hybrid E.coli/chicken TIM (ETCM8CHI).Both natural and hybrid recombinant TIMs, overproduced in E.coli,were purified to homogeneity and characterized as to their stabilityand kinetics. Our kinetic studies show that the modificationperformed here leads to an active enzyme. The stability studiesindicate that the stability of ETIM8CHI is comparable to thatof the wild type TIM.     

Gas sensors based on thick films of semi-conducting single walled carbon nanotubes

A comparative study was made of sorted semi-conducting single walled carbon nanotube (SWCNT) films and unsorted SWCNT films for gas sensing applications. The transmission line method is used to monitor separately the SWCNTs film resistance and the contact resistance between electrodes and the SWCNTs, thus revealing that the sensing mechanism mainly relies on a modification of the tube conductivity during gas exposure. The fabricated sensors demonstrate a detection limit of 20 ppb NO₂ and 600 ppb NH₃ mainly attributed to experimental setup limitations. Moreover, semi-conducting nanotubes happened to be 2.5 times more sensitive to NH₃ than unsorted ones, thus proving that selectivity can be improved by sorting the SWCNTs. The temperature dependence of the sensor sensitivity was studied, and a good agreement was found between experimental results and the Langmuir adsorption model.     

Prediction of the antigenic sites of the cystic fibrosis transmembrane conductance regulator protein by molecular modelling

Antibodies are powerful tools for studying the in situ localizationand physiology of proteins. The prediction of epitopes by molecularmodelling has been used successfully for the papilloma virus,and valuable antibodies have been raised [Muller et aL (1990)J. Gen. Virol, 71, 2709–2717]. We have improved the modellingapproach to allow us to predict epitopes from the primary sequencesof the cystic fibrosis transmembrane conductance regulator.The procedure involves searching for fragments of primary sequenceslikely to make amphipathic secondary structures, which are hydrophilicenough to be at the surface of the folded protein and thus accessibleto antibodies. Amphipathic helices were predicted using themethods of Berzofsky, Eisenberg and Jahnig. Their hydrophobichydrophilicinterface was calculated and drawn, and used to predict theorientation of the helices at the surface of the native protein.Amino acids involved in turns were selected using the algorithmof Eisenberg. Tertiary structures were calculated using ‘FOLDING’,a software developed by R.Brasseur for the prediction of smallprotein structures [Brasseur (1995) J. MoL Graphics, in press].We selected sequences that folded as turns with at least fiveprotruding polar residues. One important property of antibodiesis selectivity. To optimize the selectivity of the raised antibodies,each sequence was screened for similarity (FASTA) to the proteinsequences from several databanks. Ubiquitous sequences werediscarded. This approach led to the identification of 13 potentialepitopes in the cystic fibrosis transmembrane conductance regulator:seven helices and six loops.     

Comments on “Transient stability of an a.c. generator by Lyapunov's direct method”

A matrix method is presented for the determination of the response sequences of discrete time-invariant linear systems for a large range of deterministic input sequences.

Using the z-transform formulation the transfer function of the discrete system is defined and, assuming that the input sequence is a linear combination of a certain set of basic sequences, it is demonstrated that an explicit formulation of the output sequence may be obtained by purely matrix operations. This approach not only simplifies the application of the z-transform technique but can also be used as the basis of a digital computer programme.

Examples are given to illustrate the use of the method including its application to the solution of general nth-order difference equations     

Development of Dual Phase and Multiphase High Strength Steels by Using a New Cooling Technology: The Howaq‐Twice Process

In order to develop low alloy dual and multiphase high strength steels, CRM and Arcelor implemented the Howaq‐twice process in a continuous annealing line. This new equipment combines a slow primary cooling with a fast secondary cooling. Various cooling strategies were investigated in regard to microstructure and mechanical properties of low alloyed steels. Depending on the cooling rate and the quenching temperature, the microstructure varied between fully martensitic, ferritic‐martensitic, and ferritic‐martensitic‐bainitic. The associated tensile strengths reached from 720 to 1100 MPa.     

Enantiomeric separation using an l-RNA aptamer as chiral additive in partial-filling capillary electrophoresis

In this paper, we report the chiral resolution of arginine using an anti-arginine l-RNA aptamer chiral selector in partial-filling CE. The effects of the capillary temperature, sample load, and aptamer plug length on the enantiomeric separation were assessed. Very high chiral resolving capability was observed at low or moderate capillary temperatures (the target peak being not detected in the separation window), whereas the practical chiral resolution was achieved only at high enough temperatures (50-60 degrees C). Over this high-temperature range, the electrophoretic behavior of the target enantiomer appeared to result from a combination of binding site heterogeneity, slow desorption kinetics, and concentration overload of aptamer binding sites. From additional thermal UV melting experiments, three RNA conformations were identified for the 50-60 degrees C temperatures. It was suggested that the presence of these different RNA conformations was a plausible source of the binding site heterogeneity.     

Vancomycin dimerization and chiral recognition studied by high-performance liquid chromatography

The retention and separation of D,L-dansylvaline enantiomers (used as test solutes) were investigated using silica gel as stationary phase and vancomycin as chiral mobile-phase additive. A retention model was developed to describe the mechanistic aspects of the interaction between solute and vancomycin in the chromatographic system. It considered the formation of vancomycin dimers both "free" in the mobile phase and adsorbed on silica. By fitting the model equation to experimental data, it appeared clearly that the approach taking into account the vancomycin dimerization described accurately the retention behavior of the compounds. The examination of the model equation parameters showed that the glycopeptide dimerization increased the enantioselectivity by a factor of approximately 3.7. This study demonstrated the preponderant role of the vancomycin dimerization on the chiral recognition process of D,L-dansylvaline. Also, an additional analysis on a vancomycin chiral stationary phase indicated that the addition of vancomycin in the mobile phase promoted a greater enantioselectivity mediated by the formation of dimers in the stationary phase.     

Immobilized DNA aptamers as target-specific chiral stationary phases for resolution of nucleoside and amino acid derivative enantiomers

Recently, we described the use of a DNA aptamer as a new target-specific chiral stationary phase (CSP) for the separation of oligopeptide enantiomers (Michaud, M.; Jourdan, E.; Villet, A.; Ravel, A.; Grosset, C.; Peyrin, E. J. Am. Chem. Soc. 2003, 125, 8672). However, from a practical point of view, it was fundamental to extend the applicability of such target-specific aptamer CSP to the resolution of small (bioactive) molecule enantiomers. In this paper, immobilized DNA aptamers specifically selected against D-adenosine and L-tyrosinamide were used to resolve the enantiomers by HPLC, using microbore columns. At 20 degrees C, the adenosine enantioseparation was similar to that classically reported with imprinted CSPs (approximately 3.5) while a very high enantioselectivity was observed for the tyrosinamide enantiomers (the nontarget enantiomer was essentially nonretained on the CSP). The influence of temperature on solute binding and chiral discrimination was analyzed. The binding enthalpic contributions were determined from linear van't Hoff plots. Very large DeltaH values were obtained for the target enantiomers (-71.4 +/- 0.7 kJ/mol for D-adenosine and -139.4 +/- 2.0 kJ/mol for L-tyrosinamide). Such values were consistent with the formation of a tight complex between these analytes and the aptamer CSPs. This work demonstrates that target-specific aptamer CSPs constitute a powerful tool for the resolution of small (bioactive) molecule enantiomers.     

An intercomparison of bio-optical techniques for detecting dominant phytoplankton size class from satellite remote sensing

Satellite remote sensing of ocean colour is the only method currently available for synoptically measuring wide-area properties of ocean ecosystems, such as phytoplankton chlorophyll biomass. Recently, a variety of bio-optical and ecological methods have been established that use satellite data to identify and differentiate between either phytoplankton functional types (PFTs) or phytoplankton size classes (PSCs). In this study, several of these techniques were evaluated against in situ observations to determine their ability to detect dominant phytoplankton size classes (micro-, nano- and picoplankton). The techniques are applied to a 10-year ocean-colour data series from the SeaWiFS satellite sensor and compared with in situ data (6504 samples) from a variety of locations in the global ocean. Results show that spectral-response, ecological and abundance-based approaches can all perform with similar accuracy. Detection of microplankton and picoplankton were generally better than detection of nanoplankton. Abundance-based approaches were shown to provide better spatial retrieval of PSCs. Individual model performance varied according to PSC, input satellite data sources and in situ validation data types. Uncertainty in the comparison procedure and data sources was considered. Improved availability of in situ observations would aid ongoing research in this field.