Management of E. coli dependent factorial diseases in weaning piglets

The most important postweaning factorial diseases are at least partly caused by E. coli. The term postweaning coli complex can be subcategorized into the following manifestations: postweaning diarrhoea, edema disease, postweaning wasting and hemorrhagic gastroenteritis. In the presented study the effect of prophylactic zootechnique alone and zoo- and biotechnique in combination was evaluated during the first weeks postweaning. The results showed that combined zoo- and biotechnique is superior to simple zootechnique regarding food conversion (1.41 kg versus 1.73 kg), average daily weight gain (390 g versus 325 g) and postweaning piglet mortality (3.1% versus 4.9%). It is the opinion of the authors that combined postweaning zoo- and biotechnique should be performed in such pig production units where ETEC and/or SLTEC are present.     

Optimizing the design of railway tank cars to minimize accident-caused releases

The design of vehicles transporting hazardous materials has important public safety and economic implications. Conventional wisdom among industry and government has held that a thicker tank on railroad tank cars and trucks reduces risk. However, a thicker tank increases vehicle weight and thus leads to an increase in the number of shipments required to transport the same amount of product and consequently greater exposure to accidents. In this research we develop a model that analyzes the tradeoff between increased damage resistance and greater exposure to accidents in which the objective function is minimization of the probability of release. The model accounts for the reduction in tank car release probability as a function of tank thickness, and the increased exposure to accidents that occurs due to the increased number of shipments needed for the heavier car. Three variables affecting this optimal thickness are considered in this paper: the volumetric capacity of the tank, the probability of release from other, non-tank sources, and the weight capacity of the car. Sensitivity analyses using the model indicate that for any particular configuration of tank car there is an optimal thickness. This optimal thickness is affected by several factors and there is no single optimum for all tank cars.     

Congenic rats reveal three independent Copenhagen alleles within the Mcs1 quantitative trait locus that confer resistance to mammary cancer

It has previously been shown that the Copenhagen (COP) rat contains several genetic loci that contribute to its mammary tumor-resistant phenotype after 7,12-dimethylbenz(a)anthracene (DMBA) administration. One of these loci, mammary carcinoma susceptibility 1 (Mcs1), is located on the centromeric end of chromosome 2 and appears to act in a semidominant fashion. To confirm the existence and independent action of this locus and also aid in the identification of the physical location of the Mcs1 gene, congenic lines were generated by transferring the Mcs1 COP allele onto a Wistar Furth (WF) genetic background. Male carriers were genotyped using microsatellite markers spanning 20-30 cM of the Mcs1 locus. One of the congenic lines minimally retained the COP allele at D2Mit29 on the centromeric end of chromosome 2 and extended distally to D2Rat201. Heterozygous Mcs1 carrier rats were interbred, and the female offspring were treated with DMBA. The female rats from the Mcs1 congenic line that carried one or two COP alleles of the Mcs1 region had a significantly reduced (65 and 85%, respectively) tumor development (P < 0.001) compared with rats carrying zero COP alleles at this locus. A WF.COP-D2Mit29/D2Rat201 homozygous congenic strain derived at the N10 generation was treated with DMBA, and the COP homozygous rats developed 1.5 +/- 0.3 carcinomas/rat versus 6.3 +/- 0.5 in WF control rats (P < 0.0001). Fine mapping of this congenic interval using several recombinant lines identified three genetic loci within the Mcs1 congenic region that independently supported a tumor resistance phenotype. These genetic loci have been termed Mcs1a, Mcs1b, and Mcs1c. In rats for which each locus was homozygous for the COP allele, tumor development was reduced by approximately 60% compared with littermate controls. The identification of these independent loci within the Mcs1 COP allele provide a model of the genetic complexity of cancer.     

Use of helical parameters to generate candidate conformations for crystal packing: illustrative application to a polyimide

This communication describes the application and extension of a method for calculating the helical parameters with which to describe molecular conformations. The method, which was originally developed by Shimanouchi and others, is applied to a polyimide of 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and 2,2-dimethyl-1,3-(4-aminophenoxy)propane (DMDA) which has eight torsional bonds in the chemical repeat unit. Discrete low energy states for these torsions were determined by Ramanchandran energy maps of sequential dihedral pairs or single bond torsional energy diagrams. The total number of possible low energy conformations for these states is 1152 including conformationally related isoenantiomorphs. The method conveniently generates the conformations for subsequent crystal structure packing and refinement. Consideration of these together with the X-ray data of Cheng and co-workers reduces the number to about 15 with about a 2/1 conformation and a c axis of approximately 49.2 Å. Of these, about half appear to be good candidates for crystal packing.     

Near-Field and Plane-Wave Electromagnetic Coupling into a Slotted Circular Cylinder: Hard or TE Polarization

An analytically tractable model is proposed in this initial study of the electromagnetic phenomena that control our ability to synthesize, by using a near-field source, the effect of plane-wave coupling through an aperture into the interior of a vehicle under test. An integral equation for the tangential electric field in the slot aperture of a perfectly conducting, infinitesimally thin-walled circular cylinder is solved using a basis set of Chebyshev polynomials that are properly weighted according to the static edge condition. The resulting matrix elements from a Galerkin procedure are computed to high precision upon extracting the logarithmic singularity of the kernel of the integral operator. Exact expressions for the matrix elements, in the form of rapidly convergent series of elementary terms, are constructed by isolating another logarithmic function of the aperture width. A minimization of the mean-square error between the true plane-wave response and that due to a near-field line-source establishes the optimal complex source strength of the near-field source     

Abrupt (< 1 day), acute (< 1 week), and early (< 1 month) vessel closure at the angioplasty site. Morphologic observations and causes of closure in 130 necropsy patients undergoing coronary angioplasty

While abundant clinical and angiographic data are available regarding features of acute or abrupt closure at the site of balloon angioplasty, little morphologic information is available. This study discusses morphologic-histologic causes for acute closure after angioplasty in 130 necropsy patients. Intimal-medial flaps, elastic recoil, and primary thrombosis were the three leading morphologic causes for closure. Data were subdivided into time categories: abrupt (< 1 day), acute (< 1 week), and early (< 1 month). Intimal-medial flaps remained the most common cause for angioplasty closure despite time from angioplasty to documented occlusion. Morphologic recognition of types and frequencies of angioplasty closure are discussed, and specific mechanical, pharmacologic, or combined treatments are reviewed.     

DECOUPLER DESIGN AND CONTROL SYSTEM TUNING BY INA FOR DISTILLATION COMPOSITION CONTROL†

Six distillation column models have been used in studies of the usefulness of the Inverse Nyquist Array (INA) method for design of dual composition control for distillation. Five of the column models are experimental, one describing an industrial column, the others four pilot plants. One column model is obtained by modeling from first principles.

The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.

In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.

For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.

INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.

With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.

The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.

One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness.     

Highly potent germination inhibitors in aqueous eluate of fruits of Bishop's weed (Ammi majus L.) and avoidance of autoinhibition

The aqueous eluate from fruits ofAmmi majus (Bishop's weed, Umbelliferae) remarkably inhibited germination of adjacent seeds ofAnastatica hierochuntica, lettuce, or tomato but had no effect on intact fruits ofAmmi. Similar inhibition was found in dark or in light, except that seeds ofA. hierochuntica were significantly more inhibited in the dark than in the light. Xanthotoxin was isolated, identified, and found to account for about a sixth of the inhibitory activity of the eluate. After fruits ofAmmi were submerged in a large volume of water for 4 days, the fruits still exuded enough inhibitors to prevent germination ofA. hierochuntica, lettuce, or tomato. Data support also the proposal that the phytotoxins are compartmentalized between the inner and the outer fruit envelopes. The inner layer excludes inhibitors from the embryo and autotoxicity is thus avoided, whereas the outer one ensures a gradual liberation of the phytotoxic compounds. This, as well as the high reactivity of the eluate, the high densities ofAmmi fruits in nature, and their relatively limited annual germination, suggest chemical inhibition of neighboring plant species other thanAmmi. Hence, in addition to their chemical protection against predators of either lower or higher organisms, furanocoumarins in fruits ofAmmi majus may contribute to its success as a weed.     

Linear Programming Formulation for Strategic Dynamic Traffic Assignment

This work introduces a novel formulation of system optimal dynamic traffic assignment that captures strategic route choice in users under demand uncertainty. We define strategic route choice to be that users choose a path prior to knowing the true travel demand which will be experienced (therefore users consider the full set of possible demand scenarios). The problem is formulated based on previous work by Ziliaskopoulos (Transp Sci 34(1):37–49, 2000). The resulting novel formulation requires substantial enhancement to account for path-based flows and scenario-based stochastic demands. Further, a numerical demonstration is presented on a network with different demand loading profiles. Finally, model complexity, implications on scalability and future research directions are discussed.