Dielectric and thermal characteristics of gel grown single crystals of ytterbium tartrate trihydrate

Dielectric and thermal characteristics of gel grown single crystals of ytterbium tartrate trihydrate have been carried out. The dielectric constant has been measured as a function of frequency in the range 2 kHz–1 MHz and temperature range 30–300 °C. The dielectric constant increases with temperature, attains a peak near 215 °C, and then decreases as the temperature exceeds 215 °C. The dielectric anomaly at 215 °C is suggested to be due to phase transition brought about in the material. The dielectric behaviour of the material is correlated with the results on thermal analysis. Thermogravimetric and differential thermal analysis have been used to study the thermal characteristics of the material. The experimental results show that the material is thermally stable up to 200 °C. The decomposition process occurs in two stages until ytterbium oxide is formed at 700 °C. The non-isothermal kinetic parameters e.g., activation energy and the frequency factor have been evaluated for each stage of thermal decomposition by using the integral method, applying the Coats–Redfern approximation.     

The Bionic Man

When I hear the phrase “human-implantable electronics,” I must confess that I feel a bit queasy. It conjures up a more extreme image of pervasive computing than is usually justified. However, putting my emotional reaction aside, when I think about the possibilities of implantable technology, it actually begins to sound pretty cool.     

An introduction to RFID technology

In recent years, radio frequency identification technology has moved from obscurity into mainstream applications that help speed the handling of manufactured goods and materials. RFID enables identification from a distance, and unlike earlier bar-code technology, it does so without requiring a line of sight. In this paper, the author introduces the principles of RFID, discusses its primary technologies and applications, and reviews the challenges organizations will face in deploying this technology.     

Ontogenesis of peripheral electromagnetic receptors in hornets

This article traces the ontogenesis of peripheral electromagnetic receptors (PER) in the cuticle of the Oriental hornet (Vespa orientalis). In the abdominal cuticle of adult hornets, the PERs are densely distributed throughout, but there are even more than 30 at the margins of the segments. These organelles develop as a network in the hornet cuticle immediately upon its completion. Briefly, from each basic cell of a PER grows a bulge towards the exterior, that is, towards the illuminated region of the cuticle. This bulge develops rapidly and as it grows it starts to push out and lift up the various layers of the cuticle, the while pressing them together. By a spiraling movement, the bulge insinuates itself between the layers, whereupon it dissolves and punctures its way through all the layers of the hypocuticle, via the endocuticle up to the exocuticle. The only cuticular layer that remains intact is the epicuticle, but even that undergoes change, assuming the shape of a smooth surface with a depression at its center. The indented part in the epicuticle is circular, approximately 2.5 microm in diameter and enables the entry of radiation (illumination) from the outside into the PER, which is located half-way down the cuticle, with the distance from the exterior to the base of the PER being approximately 25 microm. The numerous lamellae of the cuticle run parallel to one another, but in the region of the bulge they are either perpendicular or directed upwards. This ontogeny of the PERs lends the cuticle a sandwich-like shape, being radically perforated by the PERs bulges, yet covered at the top by the epicuticle and at the bottom by basal cells. The PERs also extend shoots into the cuticular layer and these further perforate the cuticle but also interlink the various PERs. From all the above, it is clear that the cuticle forms first and only subsequently does the network of PERs develop and interpenetrate its various layers.     

You're Not Paranoid; They Really Are Watching You!

Ensuring both pervasive security and ease of use is a challenge for our research community. Pervasive privacy will be even more difficult to achieve.     

International Symposium on Wearable Computing (ISWC) 2008

The 12th International Symposium on Wearable Computing (ISWC) was held in Pittsburgh in September 2008. It is one of the longest-running conferences focusing on aspects of pervasive and mobile computing. With over 60 submissions, the program committee selected eight long papers, seven short papers, and nine posters for the conference (a 26 percent acceptance rate for long papers). Sessions, which were presented over two days, covered location mapping, mobile phones and human interfaces, activity recognition, activity support, and power and system integration.     

HILIC-UPLC-MS for exploratory urinary metabolic profiling in toxicological studies

Hydrophilic interaction ultra performance liquid chromatography (HILIC-UPLC) permits the analysis of highly polar metabolites, providing complementary information to reversed-phase (RP) chromatography. HILIC-UPLC-TOF-MS was investigated for the global metabolic profiling of rat urine samples generated in an experimental hepatotoxicity study of galactosamine (galN) and the concomitant investigation of the protective effect of glycine. Within-run repeatability and stability over a large sample batch (>200 samples, 60 h run-time) was assessed through the repeat analysis of a quality control sample. Following system equilibration, excellent repeatability was observed in terms of retention time (CV < 1.7%), signal intensity (CV < 14%), and mass variability (<0.005 amu), providing a good measure of reproducibility. Classification of urinary metabolic profiles according to treatment was observed, with significant changes in specific metabolites after galN exposure, including increased urocanic acid, N-acetylglucosamine, and decreased 2-oxoglutarate. A novel finding from this HILIC-UPLC-MS approach was elevated urinary tyramine in galN-treated rats, reflecting disturbed amino acid metabolism. These results show HILIC-UPLC-MS to be a promising method for global metabolic profiling, demonstrating high within-run repeatability, even over an extended run time. Retention of polar endogenous analytes and xenobiotic metabolites was improved compared with RP studies, including galN, N-acetylglucosamine, oxoglutarate, and urocanic acid, enhancing metabolome coverage and potentially improving biomarker discovery.     

Optimized preprocessing of ultra-performance liquid chromatography/mass spectrometry urinary metabolic profiles for improved information recovery

Ultra-performance liquid chromatography coupled to mass spectrometry (UPLC/MS) has been used increasingly for measuring changes of low molecular weight metabolites in biofluids/tissues in response to biological challenges such as drug toxicity and disease processes. Typically samples show high variability in concentration, and the derived metabolic profiles have a heteroscedastic noise structure characterized by increasing variance as a function of increased signal intensity. These sources of experimental and instrumental noise substantially complicate information recovery when statistical tools are used. We apply and compare several preprocessing procedures and introduce a statistical error model to account for these bioanalytical complexities. In particular, the use of total intensity, median fold change, locally weighted scatter plot smoothing, and quantile normalizations to reduce extraneous variance induced by sample dilution were compared. We demonstrate that the UPLC/MS peak intensities of urine samples should respond linearly to variable sample dilution across the intensity range. While all four studied normalization methods performed reasonably well in reducing dilution-induced variation of urine samples in the absence of biological variation, the median fold change normalization is least compromised by the biologically relevant changes in mixture components and is thus preferable. Additionally, the application of a subsequent log-based transformation was successful in stabilizing the variance with respect to peak intensity, confirming the predominant influence of multiplicative noise in peak intensities from UPLC/MS-derived metabolic profile data sets. We demonstrate that variance-stabilizing transformation and normalization are critical preprocessing steps that can benefit greatly metabolic information recovery from such data sets when widely applied chemometric methods are used.     

Disappearing hardware [ubiquitous computing]

In M. Weiser's (ibid., pp. 19-25) vision of ubiquitous computing, computers will disappear from conscious thought. From a hardware perspective, the authors examine how far we've succeeded in implementing this vision and how far we have to go.