“Technically Unavoidable” in Terms of Genetically Modified Organisms – an Approach for Food Control

In case of findings of authorized genetically modified (gm) plant ingredients below the 0.9 per cent threshold, exceptions from labelling requirements according to regulation (EC) No. 1829/2003 can only be made, “provided that this presence is adventitious or technically unavoidable”. The authors describe factors that should be considered regarding contaminations by gm plant ingredients as technically unavoidable or not. A practical approach for interpretation, taking into account quality control measures and documentation as well as present findings in comparable products is proposed. Received: February 23, 2007     

Treatment of malignant melanoma (clinical stages I and II) (author's transl)

The uncorrected cumulative five-year survival rate ("actuarial method") among 195 patients with infiltrative malignant melanoma of the skin was 58% (160 cases) in clinical stage I, 26% (35 cases) in clinical stage II. In addition to clinical staging, microstaging - i.e. the histologically determined depth of invasion of the primary tumour - is of great prognostic significance. In microstages 2 and 3 with the largest vertical tumour diameter below 0.76 mm, five-year survival rate was 100% while in microstage 3 with greater vertical tumour diameter it was 66% in microstage 4 55% and microstage 5 31%. Results of treatment can be reliably interpreted only if they are divided according to microstage. Propylactic dissection of the regional lymph-nodes (dissection in clinical stage I) need not be undertaken in microstages 2 and 3 with vertical tumours diameter below 0.76 mm. Whether prophylactic dissection was done in one or two sessions has apprarently no significant influence on survival rate. A single X-radiation dose to the primary tumour of 4 000 -6000 R immediately before excision of the tumour did not significantly increase the results. The results were particularly bad when the primary tumour was removed after inadequate manipulation.     

Guidelines and recommendations for indoor use of fuel cells and hydrogen systems

Hydrogen energy applications often require that systems are used indoors (e.g., industrial trucks for materials handling in a warehouse facility, fuel cells located in a room, or hydrogen stored and distributed from a gas cabinet). It may also be necessary or desirable to locate some hydrogen system components/equipment inside indoor or outdoor enclosures for security or safety reasons, to isolate them from the end-user and the public, or from weather conditions.Using of hydrogen in confined environments requires detailed assessments of hazards and associated risks, including potential risk prevention and mitigation features. The release of hydrogen can potentially lead to the accumulation of hydrogen and the formation of a flammable hydrogen-air mixture, or can result in jet-fires. Within Hyindoor European Project, carried out for the EU Fuel Cells and Hydrogen Joint Undertaking safety design guidelines and engineering tools have been developed to prevent and mitigate hazardous consequences of hydrogen release in confined environments. Three main areas are considered: Hydrogen release conditions and accumulation, vented deflagrations, jet fires and including under-ventilated flame regimes (e.g., extinguishment or oscillating flames and steady burns). Potential RCS recommendations are also identified.     

Vapour–liquid slip in a parallel-plate electrochemical fluorination reactor

A mathematical model was used to study the effect of slip between the gas and liquid phases on the performance of an electrochemical fluorination reactor. The model incorporates two-phase flow with differential material, energy and pressure balances. The effect of slip on the temperature, pressure, gas fraction and current distribution in the reactor is presented under relatively severe operating conditions. In addition, the effect of slip on the cell voltage, current efficiency and energy usage is shown at different flow rates over a wide current range. It was found that slip of the gas past the liquid is insignificant under normal operating conditions, but it is significant at high cell currents and low flow rates. Under these more severe operating conditions, slip significantly reduces the cell voltage, and hence the energy usage, since less gas resides in the reactor.     

Einfluß der Herstellungsbedingungen von Doppel-V-Kerben an Prüfkörpern für den Schlagbiegeversuch nach DIN 53 753

Influence of the Manufacturing Process of Double V-Notches of the Test Specimens In connexion with DIN 53 753 ?Impact bending test on a test specimen with a hole-notch or double V-notch”? tests were carried out on test specimen whose notches had been manufactured by different procedures (by planing and by placing the notches into the injection mould). Four different thermoplastics – some of them short-glassfiber reinforced–were used. Proof was gained that all specimens with a notch radius of 0.5 mm will break and that hardly any differences between ?planed”? and ?injected”? notches will exist. With the possibility of selecting one particular radius it has become feasible to draw comparisons between the individual plastics as to their impact strengths. Microtome cuts, SEM-micrographs of the area of fracture and orientation measurements with the aid of a micropolariscope complete the investigations.     

Study of Deformation Phenomena in TRIP/TWIP Steels by Acoustic Emission and Scanning Electron Microscopy

Modern metastable steels with TRIP/TWIP effects have a unique set of physical-mechanical properties. They combine both high-strength and high-plasticity characteristics, which is governed by processes activated during deformation, namely, twinning, the formation of stacking faults, and martensitic transformations. To study the behavior of these phenomena in CrMnNi TRIP/TWIP steels and stainless CrNiMo steel, which does not have these effects in the temperature range under study, we used the method of acoustic emission and modern methods of signal processing, including the cluster analysis of spectral-density functions. The results of this study have been compared with a detailed microstructural analysis performed with a scanning electron microscope using electron backscatter diffraction (EBSD).     

PGSS-drying: Mechanisms and modeling

Micronization of polyethylene glycol from aqueous solutions has been successfully performed with particles from gas-saturated solutions (PGSS)-drying process, producing spherical PEG particles with average particle size of 10 μm and residual water content below 1 wt%. Based on experimental results, an analysis of the fundamentals of the process has been developed, discussing mass and energy balances, phase equilibrium conditions, mass transfer rates and atomization mechanisms. Some discrepancies between experimentally observed moisture concentration in powder and calculations based on the mass balance and the phase equilibrium have been observed, which have been attributed to the kinetic evolution of pressure and temperature along the expansion path. The static mixer used to saturate the solution with CO₂ has been analyzed with phase equilibrium and mass transfer calculations, concluding that a significant fraction of water is extracted to the gas phase already in the static mixer, and high CO₂ concentrations are achieved in the liquid due to the high solubility of CO₂ in PEG. All experimental trends of variation of particle size with process parameters can be explained considering a flash-boiling atomization mechanism dependant on the concentration of CO₂ in the solution after the static mixer.     

Physicochemical factors affecting the rapid bactericidal efficacy of the phenolic antibacterial triclosan

The antimicrobial activity of triclosan (TCS; 2,4,4'-trichloro-2'-hydroxydiphenyl ether) in aqueous solutions is shown to directly depend upon two key physicochemical parameters: % saturation and saturation solubility. Saturated solutions of TCS in water, water-propylene glycol (PG) mixtures, and aqueous surfactant systems are shown to effect rapid, potent bacterial reductions (e.g. >4 log(10) reduction of Staphylococcus aureus in 15 s contact time in a time kill suspension test). In surfactant solutions, increasing the surfactant: TCS ratio causes a decrease in antibacterial efficacy, consistent with a model for micellar solubilization where the micelle binding constant, K (=X/c(w)) increases with decreasing TCS concentration in the micelles (X), resulting in decreased concentration of bioavailable TCS in the water (continuous) phase (c(w)). The rapid and potent reductions of bacteria reported here were surprising and support the existence of a non-specific mode of action for TCS, such as gross membrane disruption, in addition to the specific modes of action reported by others.