InP D-HBT ICs for 40-Gb/s and higher bitrate lightwave transceivers

The combination of device speed (f/sub T/, f/sub max/ > 150 GHz) and breakdown voltage (V/sub bceo/ > 8 V) makes the double heterojunction bipolar InP-based transistor (D-HBT) an attractive technology to implement the most demanding analog functions of 40-Gb/s transceivers. This is illustrated by the performance of a number of analog circuits realized in an InP D-HBT technology with an 1.2- or 1.6-/spl mu/m-wide emitter finger: a low phase noise push-push voltage-controlled oscillator with -7-dBm output power at 146 GHz, a 40-GHz bandwidth and low-jitter 40-Gb/s limiting amplifier, a lumped 40-Gb/s limiting driver amplifier with 4.5-V/sub pp/ differential output swing, a distributed 40-Gb/s driver amplifier with 6-V/sub pp/ differential output swing, and a number of distributed preamplifiers with up to 1.3-THz gain-bandwidth product.     

D-AKAP2, a novel protein kinase A anchoring protein with a putative RGS domain

Subcellular localization directed by specific A kinase anchoring proteins (AKAPs) is a mechanism for compartmentalization of cAMP-dependent protein kinase (PKA). Using a two-hybrid screen, a novel AKAP was isolated. Because it interacts with both the type I and type II regulatory subunits, it was defined as a dual specific AKAP or D-AKAP1. Here we report the cloning and characterization of another novel cDNA isolated from that screen. This new member of the D-AKAP family, D-AKAP2, also binds both types of regulatory subunits. A message of 5 kb pairs was detected for D-AKAP2 in all embryonic stages and in all adult tissues tested. In brain, skeletal muscle, kidney, and testis, a 10-kb mRNA was identified. In testis, several small mRNAs were observed. Therefore, D-AKAP2 represents a novel family of proteins. cDNA cloning from a mouse testis library identified the full length D-AKAP2. It is composed of 372 amino acids which includes the R binding fragment, residues 333-372, at its C-terminus. Based on coprecipitation assays, the R binding domain interacts with the N-terminal dimerization domain of RIalpha and RIIalpha. A putative RGS domain was identified near the N-terminal region of D-AKAP2. The presence of this domain raises the intriguing possibility that D-AKAP2 may interact with a Galpha protein thus providing a link between the signaling machinery at the plasma membrane and the downstream kinase.     

Long-term follow-up of a randomized post-induction therapy trial in acute myelogenous leukemia (a Southeastern Cancer Study Group trial)

A phase III clinical trial was designed to determine if more intensive induction and consolidation therapy for acute myeloblastic leukemia increases the remission rate and prolongs survival. A minor objective was to determine if the use of non-cross resistant drugs was more effective than the same drugs used for induction. Patients with untreated leukemia between the ages of 15 and 50 were given daunorubicin 45 mg/m2 for the first 3 days of a 10-day continuous infusion of cytosine arabinoside, initially at a dose of 2000 mg/m2 but reduced to 100 mg/m2 because of toxicity. Those under 36 achieving a complete remission and with an histocompatible donor were assigned to a transplant arm. The rest were randomized to receive one of three consolidation arms: A, cytosine arabinoside, 200 mg/m2 daily for 7 days and daunorubicin 45 mg/m2 daily for 3 days for three courses; B, one course as in Arm A followed by amsacrine, 120 mg/m2 daily for 5 days followed by a 5-day continuous infusion of azacytidine, 150 mg/m2/day; C, thioguanine and cytosine arabinoside, 100 mg/m2 every 12 h and daunorubicin 10 mg/m2 daily for 5 days for three courses followed by four maintenance courses of cytosine arabinoside, 100 mg/m2 daily for 5 days and daunorubicin, 45 mg/m2 for 2 days every 13 weeks. From 1981 to 1986, 398 eligible patients were enrolled and 219 achieved a complete remission. The initial induction dose of cytosine arabinoside was reduced after five of 29 patients exhibited fatal gastrointestinal toxicity. Only 11 patients were assigned to the transplant arm. There were no significant differences in the consolidation arms. The 5 year disease-free survivals were 38, 31 and 27% in arms A, B, and C respectively. Intensive consolidation therapy with the same or different drugs used in induction was as effective as lower dose consolidation followed by maintenance therapy.     

A phase II trial of weekly infusional 5-fluorouracil in combination with low-dose leucovorin in patients with advanced colorectal cancer

We examined 59 breast cancers for p53 and bcl-2 protein expression by immunohistochemistry. The results were correlated with Ki-67 immunostaining. p53-negativity was noted in 40 cases and the remaining 19 tumours were p53-positive. Thirty-six tumours showed strong expression of bcl-2 and in 23 no staining for this protein was observed. We found statistically significant reverse correlation between expression of p53 and bcl-2 in majority of carcinomas: 31 cases were bcl-2 positive and p53-negative, and 14 tumours were bcl-2-negative and p53-positive. Six carcinomas showed no nuclear staining for Ki-67 and in the remaining 53 the percent of cancer cells positive for Ki-67 ranged from 1 to 60 (mean: 14.6). In these 53 cases we found that bcl-2-positive tumours were characterized by lower proliferation than bcl-2-negative tumours, the mean value of Ki-67 immunostaining being 10.7% and 23.0%, respectively. p53-negative tumours showed lower proliferation than p53-positive tumours: mean Ki-67 index was 10.2% and 23.9%, respectively. We conclude that immunohistochemically detected p53 and bcl-2 proteins show a significant inverse relationship in majority of breast carcinomas and their expression correlates with tumour proliferation (Ki-67 immunostaining).     

Thermoluminescence Dating and the Problem of Geochemical Evolution of Sediments — A Case Study: The Mousterian Levels at Hayonim

The thermoluminescence dating of burnt flints has become a major tool in the elaboration of the chronology of human settlements of the last half a million years. The reliability of an age estimate depends to a great extent on the accuracy with which the internal and external radiation dose rates prevailing during the duration of burial can be determined. While determining the internal dose rate is relatively straightforward, the same cannot be said of the external, particularly if the sediment surrounding the flints is mineralogically heterogeneous or has undergone diagenetic changes during prolonged burial. In this article we show some examples of the problems confronted when one attempts to determine the external dose rates experienced by flints buried in a relatively heterogeneous environment of sediments, such as those sampled at the Middle Paleolithic occupation levels at Hayonim (Israel) which show evidence of past mineralogical evolution. The impact of changes produced by leaching and chemical reactions between the components of hearth ashes on the radioisotopic composition of the sediment and consequently the environmental dose rates were examined by subjecting several distinct sediment layers to thorough mineralogical, radiochemical, and dosimetric analyses. The problems of external dose-rate determinations in mineralogically heterogeneous sediments are examined, particularly in those consisting of variable amounts of siliceous aggregates, apatite, and other phosphorus-rich minerals produced by diagenetic reactions with bone residues.     

Modelling the three-dimensional elastic constants of parallel-fibred and lamellar bone

The complex hierarchical structure of lamellar bone makes understanding structure–mechanical function relations, very difficult. We approach the problem by first using the relatively simple structure of parallel-fibred bone to construct a mathematical model for calculating Young's moduli in three-dimensions. Parallel-fibred bone is composed essentially of arrays of mineralized collagen fibrils, which are also the basic structural motif of the individual lamellae of lamellar bone. Parallel-fibred bone structure has orthotropic symmetry. As the sizes and shapes of crystals in bone are not well known, the model is also used to compare the cases of platelet-, ribbon- and sheet-reinforced composites. The far more complicated rotated plywood structure of lamellar bone results in the loss of the orthotropic symmetry of individual lamellae. The mathematical model used circumvents this problem by sub-dividing the lamellar unit into a thin lamella, thick lamella, transition zone between them, and the recently observed back-flip lamella. Each of these is regarded as having orthotropic symmetry. After the calculation of their Young's moduli they are rotated in space in accordance with the rotated plywood model, and then the segments are combined to present the overall modulus values in three-dimensions. The calculated trends compare well with the trends in microhardness values measured for circumferential lamellar bone. Microhardness values are, as yet, the only measurements available for direct comparison. Although the model is not directly applicable to osteonal bone, which is composed of many hollow cylinders of lamellar bone, the range of calculated modulus values and the trends observed for off-axis calculations, compare well with measured values. © 1998 Chapman & Hall     

A thin film electrochromic display based on the tungsten bronzes

The main features of a passive thin film display cell based on the electrochemically reversible formation of a tungsten bronze according to the reaction

$\text{(colourless) WO}{}_3\text{+ x}\text{M}{}^{\mathrm{+}}\text{+ x}\text{e}{}^{\mathrm{?}}\text{?}\text{M}{}_{\mathrm{x}}\text{WO}{}_3\text{(blue)}$

where 0 < x < 1 are considered. Chemical analysis of an electrochemically coloured WO₃ film has confirmed the presence of M. It is shown that a critical requirement of these cells is that D_τ(qC_m/Q)² ≈ 1, where the symbols are, in order, the M⁺ diffusion coefficient, the required device response time, the electronic charge, the maximum practical volume concentration of M in the WO₃ film and lastly the area colouring charge. Typical energy requirements might be about 10 mJ cm^?2 per complete cycle in a favourable case.Ionic injection overpotentials and ionic diffusion both appear to play a significant role in determining cell currents. Preliminary diffusion coefficient results for Li⁺ in r.f. sputtered WO₃ films are reported, and their predicted dependence of film structure is discussed. The optical absorption of coloured WO₃ films is presented, and it is interpreted as being predominantly due to free-electron intraband transitions.     

Synthesis, structure, and field emission properties of sulfur-doped nanocrystalline diamond

The synthesis and properties of sulfur-doped nanocrystalline diamond films were investigated. The films were deposited by hot-filament chemical vapor deposition on Mo substrates using methane, hydrogen, and hydrogen disulfide. The nanocrystalline nature of the material arises from the induction of continuous secondary nucleation in the chemical vapor deposition environment. Complementary characterization tools were employed in order to obtain a comprehensive and coherent understanding of the correlations between the structural and electronic properties. In particular, sulfur-doped nanocrystalline diamond films show n-type Hall conductivity, enhanced field emission properties, and insensitivity to ion radiation. It was found that n-type doping of the tetragonally-bonded carbon matrix together with a nano network of trigonally-bonded carbon are crucial elements for enhanced field emission from nanocrystalline diamond. These conclusions and the corresponding supporting evidence are discussed.