Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

The Self and Object Representations of Narcissistically Disturbed Children: An Empirical Investigation.

The aim of this study was to demonstrate a correlation between the clinical assessment of narcissistic personality disorder in children and underlying self and object relationships. D. Westen's Social Cognition and Object Relations Scale for the Thematic Apperception Test (1995; D. Westen, N. Lohr, K. Silk, K. Kerber, & S. Goodrich, 1985) was used to compare the object representations of two groups of referred latency-aged children, one for whom narcissistic issues were thought to be primary. Support for the clinical literature, which describes these children as lacking in empathy, struggling with self-esteem regulation, and in poor control of their impulses or aggression, was found. Additionally, a tendency to have a vulnerable sense of identity and to be preoccupied with seeking out and developing relationships with others was found to differentiate these children from peers with similar behavioral and diagnostic profiles. Results obtained have potential implications for the assessment and treatment of narcissistically disturbed children. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Designing in between Local Government and the Public – Using Institutional Analysis in Interventions on Civic Infrastructures

Adapting and changing the systems and technologies involved in civic engagement with local government is among the key challenges of collaborative technologies for political participation. In such contexts, both existing sets of technologies and ingrained, often formalised practices, the ‘rules of the game’, constrain any opportunity for intervention. Additionally, ‘civic’ and expert groups with conflicting agendas and divergent demands on public choices assert their influence in these transformation programmes. The article argues that established methods in collaborative systems design have thus far overlooked the role of recurring actions involved in public participation as well as the formal rules and ingrained practices that construct them. Yet, such patterns present a valuable resource for design interventions. Thus, based on an institutional approach, the article outlines a methodology for requirement gathering by mapping the relations of actors, software and their use along identifiable action situations. The method called for a dialogue between socio-technical-spatial contexts of public service and specific actions taking place within it. Drawing on a case of organising civic engagement in urban planning, the article discusses how to find and trace existing practices across social settings, information technologies and material contexts where engagements take place. The approach underscores the existing institutional contexts in inspiring, opening and constraining the opportunities to support ‘civics’.     

Frequency response of fiber-optic multilayer hydrophones: experimental investigation and finite element simulation

The frequency response of a fiber-optic hydrophone that uses a dielectric multilayer system as the sensing element for ultrasound detection is investigated. A primary interferometric calibration technique is applied to determine by experiment the frequency-dependent pressure-voltage transfer function up to 45 MHz. The interaction between an incident pressure wave and the fiber end is analyzed by finite element methods. The simulation yields the response of the sensor to a short Gaussian impulse in the time domain from which the transfer function is calculated. The results of the model simulations allowed the transfer function obtained to be interpreted as the result of the superposition of longitudinal, edge diffraction and lateral waves with a resonant vibration mode of the fiber body representing an elastic rod     

Compiling scientific code using partial evaluation

The partial evaluation approach, which transforms a high-level program into a low-level program that is specialized for a particular application, exposing the parallelism inherent in the underlying numerical computation, is discussed. A prototype compiler that uses partial evaluation is described. Experiments with the compiler have shown that for an important class of numerical programs, partial evaluation can provide marked performance improvements: speedups over conventionally compiled code that range from seven times faster to 91 times faster have been measured. By coupling partial evaluation with parallel scheduling techniques, the low-level parallelism inherent in a computation can be exploited on heavily pipelined or parallel architectures. The approach has been demonstrated by applying a parallel scheduler to a partially evaluated program that simulates the motion of a nine-body solar system     

The replisome organizer (G38P) of Bacillus subtilis bacteriophage SPP1 forms specialized nucleoprotein complexes with two discrete distant regions of the SPP1 genome

Initiation of Bacillus subtilis bacteriophage SPP1 DNA replication requires the products of genes 38, 39 and 40 (G38P, G39P and G40P). G38P specifically binds two discrete regions, which are 32.1 kb apart in a linear map of the SPP1 genome. One of these target sites, which maps at the left end of the phage genome, within gene 38, was shown to function as an origin of replication and was therefore termed left origin (oriL). The other site, which lies within a non-coding segment in the late transcribed region on the right end of the genome, was termed oriR. Both sites contain two types of repeated elements (termed Box AB and A + T-rich region). The K(app) for the G38P-oriL DNA and G38P-oriR DNA complexes was estimated to be 1 nM and 4 nM, respectively. G38P binds to the distant oriL and oriR sites cooperatively. DNase I footprinting experiments showed protection by G38P in Box AB, but not in the A + T-rich region. Electron microscopy analysis showed that G38P forms a higher-order nucleoprotein structure with the SPP1 oriL and oriR sites through protein-protein interaction. G38P binding at its cognate sites does not seem to modify the length of the DNA, but to bend it. These results suggest that G38P forms a nucleoprotein complex on the regions where the SPP1 replication origins were previously predicted.     

Influence of particle additions on the foaming behaviour of AlSi11/TiH2 composites made by semi-solid processing

The influence of Al₂O₃ and SiC particles on the foaming behaviour of thixocast AlSi11 precursor material was investigated using mechanical and X-ray expandometry, image analysis of X-ray images and optical analysis of metallographic sections. A significant improvement of maximum expansion, collapse behaviour and pore structure could be obtained by addition of 1–5 wt.% particles, with higher efficiency of smaller particles. The role of the particles and the observed variations of efficiency are explained by differences in the way of particle agglomeration on or near cell wall surfaces.     

Preparation and properties of bisphenol A polyetherketoneketone based phthalonitrile resins

A promising high temperature phthalonitrile (PN) resin composed of a polyetherketoneketone (PEKK) core bridged by two bisphenol A linkers and end capped with PN groups is presented. This PEKK-PN resin was characterized via differential scanning calorimetry, thermogravimetric analysis, proton nuclear magnetic resonance spectroscopy, scanning electron microscopy, dynamic mechanical analysis, attenuated total reflection Fourier transform infrared, and rheometry. The PEKK-PN resin was evaluated with two different compositions containing 1) 70:30 PEKK-PN to bisphenol A PN (n = 0) and 2) pure PEKK-PN. The 70:30 PEKK-PN resin was mixed with bis[4-(3-aminophenoxy)phenyl]sulfone and exhibited a melt viscosity of 271 cP, much lower than the 657 cP viscosity of the pure PEKK-PN mixture. Void-free PEKK-PN polymers were easily prepared by degassing and curing up to 380°C, resulting in fully crosslinked networks exhibiting thermal stability above 500°C and a 75% char yield. Additionally, the cured PEKK-PN polymer samples displayed good mechanical integrity retaining 50% stiffness at 300°C. This combination of properties suggests these new PEKK-PN resins are excellent materials for high temperature thermosets in composite applications.