Railgun performance with a two-stage light-gas gun injector

Results obtained with the HELEOS (hypervelocity experimental launcher for equation of state) railgun, which uses a two-stage light-gas gun (2SLGG) as an injector, are presented. The high-velocity 2SLGG injector preaccelerates projectiles up to ~7 km/s. The high injection velocity reduces the exposure duration of the railgun barrel to the passing high temperature plasma armature, thereby reducing the ablation and subsequent armature growth. The 2SLGG also provides a column of cool, high-pressure hydrogen gas to insulate the rails behind the projectile, thereby eliminating restrike. A means to form an armature behind the injected projectile has been developed. In preliminary tests, the third-stage railgun has successfully increased the projectile velocity by 1.35 km/s. Extensive diagnostics have been used to determine the behavior of the armature and track the launcher's performance. Insome cases, velocity increases in the railgun section have been achieved, which are in close agreement with theoretical predictions, whereas in other experiments deviations from theoretical have been observed. The reasons for and implications of these results are addressed. Recent tests are reported     

Elemental dissolution study of Pu-bearing borosilicate glasses

Single-pass flow-through tests were conducted to study the effects of self-radiation damage from alpha decay on dissolution kinetics of three radiation-aged Pu-bearing (1 mass% PuO₂) borosilicate glasses over a pH interval of 9–12 at 80–88 °C. The chemical compositions of the glasses were identical except the ²³⁹Pu/²³⁸Pu isotopic ratio, which was varied to yield accumulated doses of 1.3 × 10¹⁶, 2.9 × 10¹⁷ and 2.6 × 10¹⁸ -decays/g at the time of testing. Release of Al, B, Cs, Na, Si and U to solution increased with increasing pH, whereas Ca, Pu and Sr were invariant over the pH interval. Average dissolution rates, based on B release, were identical within experimental uncertainty for all three glass compositions and increased from 0.17 ± 0.07 at pH(23 °C) 9 to 10.6 ± 2.7 (g/(m² d¹)) at pH(23 °C) 12. Release rates of Pu were 10²- to 10⁵-fold slower compared to all other elements and were not affected by isotopic composition, self-radiation damage sustained by the glass, or pH. These data demonstrate that self-radiation damage does not affect glass dissolution rates, despite exposure to internal radiation doses for >20 years.     

Trading agents competing: performance, progress, and market effectiveness

The annual trading agent competition offers agent designers a forum for evaluating programmed trading techniques in a challenging market scenario. TAC aims to spur research by enabling researchers to compare techniques on a common problem and build on each other's ideas. A fixed set of assumptions and environment settings facilitates communication of methods and results. As a multiyear event, TAC lets researchers observe trading agents' progress over time, in effect accelerating the evolution of an adapted population of traders. Given all the participant effort invested, it is incumbent on us to learn as much from the experience as possible. After three years of TAC, we're ready to examine there we stand. To do this, we used data from actual TAC tournaments and some post-competition experimentation. We based our analysis almost entirely on outcomes (profits and allocations), with very little direct accounting for specific agent techniques.     

Conjectural Equilibrium in Multiagent Learning

Learning in a multiagent environment is complicated by the fact that as other agents learn, the environment effectively changes. Moreover, other agents' actions are often not directly observable, and the actions taken by the learning agent can strongly bias which range of behaviors are encountered. We define the concept of a conjectural equilibrium, where all agents' expectations are realized, and each agent responds optimally to its expectations. We present a generic multiagent exchange situation, in which competitive behavior constitutes a conjectural equilibrium. We then introduce an agent that executes a more sophisticated strategic learning strategy, building a model of the response of other agents. We find that the system reliably converges to a conjectural equilibrium, but that the final result achieved is highly sensitive to initial belief. In essence, the strategic learner's actions tend to fulfill its expectations. Depending on the starting point, the agent may be better or worse off than had it not attempted to learn a model of the other agents at all.     

Erosion, corrosion and erosion–corrosion of EB PVD thermal barrier coatings

Electron beam (EB) physical vapour deposited (PVD) thermal barrier coatings (TBCs) have been used in gas turbine engines for a number of years. The primary mode of failure is attributed to oxidation of the bond coat and growth of the thermally grown oxide (TGO), the alumina scale that forms on the bond coat and to which the ceramic top coat adheres. Once the TGO reaches a critical thickness, the TBC tends to spall and expose the underlying substrate to the hot gases. Erosion is commonly accepted as a secondary failure mechanism, which thins the TBC thus reducing its insulation capability and increasing the TGO growth rate. In severe conditions, erosion can completely remove the TBC over time, again resulting in the exposure of the substrate, typically Ni-based superalloys. Since engine efficiency is related to turbine entry temperature (TET), there is a constant driving force to increase this temperature. With this drive for higher TETs comes corrosion problems for the yttria stabilised zirconia (YSZ) ceramic topcoat. YSZ is susceptible to attack from molten calcium–magnesium–alumina–silicates (CMAS) which degrades the YSZ both chemically and micro-structurally. CMAS has a melting point of around 1240 °C and since it is common in atmospheric dust it is easily deposited onto gas turbine blades. If the CMAS then melts and penetrates into the ceramic, the life of the TBC can be significantly reduced. This paper discusses the various failure mechanisms associated with the erosion, corrosion and erosion–corrosion of EB PVD TBCs. The concept of a dimensionless ratio D/d, where D is the contact footprint diameter and d is the column diameter, as a means of determining the erosion mechanism is introduced and discussed for EB PVD TBCs.     

Automated Negotiation from Declarative Contract Descriptions

Our approach for automating the negotiation of business contracts proceeds in three broad steps. First, determine the structure of the negotiation process by applying general knowledge about auctions and domain–specific knowledge about the contract subject along with preferences from potential buyers and sellers. Second, translate the determined negotiation structure into an operational specification for an auction platform. Third, after the negotiation has completed, map the negotiation results to a final contract. We have implemented a prototype which supports these steps by employing a declarative specification (in courteous logic programs) of (1) high–level knowledge about alternative negotiation structures, (2) general–case rules about auction parameters, (3) rules to map the auction parameters to a specific auction platform, and (4) special–case rules for subject domains. We demonstrate the flexibility of this approach by automatically generating several alternative negotiation structures for the domain of travel shopping in a trading agent competition.     

Effect of microstructure and temperature on the erosion rates and mechanisms of modified EB PVD TBCs

Thermal barrier coatings (TBCs) have now been used in gas turbine engines for a number of decades and are now considered to be an accepted technology. As there is a constant drive to increase the turbine entry temperature, in order to increase engine efficiency, the coatings operate in increasingly hostile environments. Thus there is a constant drive to both increase the temperature capabilities of TBCs while at the same time reducing their thermal conductivities. The thermal conductivity of standard 7 wt% yttria stabilized zirconia (7YSZ) electron beam (EB) physical vapour deposited (PVD) TBCs can be reduced in two ways: the first by modification of the microstructure of the TBC and the second by addition of ternary oxides. By modifying the microstructure of the TBC such that there are more fine pores, more photon scattering centres are introduced into the coatings, which reduce the heat transfer by radiation. While ternary oxides will introduce lattice defects into the coating, which increases the phonon scattering, thus reducing the thermal conductivity via lattice vibrations. Unfortunately, both of these methods can have a negative effect on the erosion resistance of EB PVD TBCs.This paper compares the relative erosion rates of ten different EB PVD TBCs tested at 90° impact at room temperature and at high temperature and discusses the results in term of microstructural and temperature effects. It was found that by modifying the coating deposition, such that a low density coating with a highly ‘feathered’ microstructure formed, generally resulted in an increase in the erosion rate at room temperature. When there was a significant change between the room temperature and the high temperature erosion mechanism it was accompanied by a significant decrease in the erosion rate, while additions of dopents was found to significantly increase the erosion rate at room and high temperature. However, all the modified coatings still had a lower erosion rate than a plasma sprayed coatings. So, although, relative to a standard 7YSZ coating, the modified coatings have a lower erosion resistance, they still perform better than PS TBCs and their lower thermal conductivities could make them viable alternatives to 7YSZ for use in gas turbine engines.