Multichannel FM-TV transmission using an engineered 1.3 μmpraseodymium-doped fluoride fibre amplifier

The authors report the first use of a praseodymium-doped fluoride fibre amplifier (PDFFA) in a 24 TV channel FM-SCM transmission experiment. Twenty-four analogue FM-SCM-TV channels were amplified by a PDFFA without any observable degradation in picture quality. By using a single PDFFA as a post-amplifier, transmission over 104 km of `standard' 1.3 μm optimised fibre was demonstrated with a total loss budget of 45 dB. By using the same PDFFA as an inline amplifier, a loss budget of 53 dB was achieved     

Measurement and analysis of pump-dependent refractive index anddispersion effects in erbium-doped fiber amplifiers

In a doped fiber, at wavelengths close to an absorption, the refractive index, and hence the dispersion, is expected to be a strong function of wavelength, as described by the Kramers-Kronig relationship. Furthermore, this spectral variation itself will be a function of pumping. This paper describes an accurate and sensitive experimental determination of the pump dependence of the refractive index in an erbium-doped fiber amplifier. A Mach-Zehnder interferometric measurement is described where only one arm is comprised of doped fiber. Particular attention is paid to accounting for the significant difference in power levels in the two arms and the effects of polarization and incoherent light. The measured refractive-index change matches well with that theoretically predicted. The pumped and unpumped dispersion of the amplifier are calculated. While the extra dispersion is of similar magnitude to that of silica fiber, the impact on long telecommunications systems is likely to be negligible. However, this extra dispersion may be important in shorter systems such as soliton lasers. Given the good agreement between theory and experiment, the variation of dispersion with fractional inversion is calculated from absorption and gain measurements. The presence of codopants is known to alter the absorption and emission spectra; the effect on the dispersion is calculated, and a near linear dependence on germanium concentration is observed     

Conservative treatment of copperhead snakebites without antivenin

Polyvalent antivenin remains the most recommended treatment of crotalid envenomation, including copperhead snakebites. Because of the significant morbidity associated with antivenin therapy, some have proposed conservative therapy for less serious envenomations. Few if any studies have separated the treatment of the less serious copperhead bite from the more serious bite of a rattlesnake or a water moccasin. Fifty-five patients, including 12 children, with copperhead bites were treated over a 12-year period. All 55 patients were successfully treated conservatively without antivenin. Conservative treatment resulted in no deaths, limb loss, or residual disability. The mean hospital stay was 2.15 days compared with 3.9 days in patients with systemic symptoms. These data support a conservative approach to most copperhead envenomations and suggest that the treatment for copperhead bites should be segregated from the more serious rattlesnake and water moccasin snakebites.     

Laser Specular Reflectance and the Optical rms Roughness of Alumina

Using laser specular reflectance, the optical rms roughnesses (σ₀'S) of 42 polycrystalline aluminas (PCA's) were determined. From these conventional experimental results, a nomogram was constructed so that single grazing angle (α) measurements could be used to predict σ₀. Subsequently, the nomogram was reassessed using five commercially important PCA's and one single-crystal sapphire (SC). The outcomes were twofold: that this nomogram was valid for PCA's over the range of 0.28 σ₀ 0.10 μm, but that the nomogram was invalid for SC sapphire. When the conventional experimental method was compared with the nomogram method at three different single-angle values, a 1:1 correspondence was observed for α= 78°, 80°, and 82°. The present noncontact method is advocated for speed and cleanliness, particularly when a quality assurance method is desired.     

Co-capping studies reveal CD8/TCR interactions after capping CD8 beta polypeptides and intracellular associations of CD8 with p56(lck)

A reaction-diffusion model was developed to predict the fate of nitric oxide (NO) released by cells of the immune system. The model was used to analyze data obtained previously using macrophages attached to microcarrier beads suspended in a stirred vessel. Activated macrophages synthesize NO, which is oxidized in the culture medium by molecular oxygen and superoxide (O2-, also released by the cells), yielding mainly nitrite (NO2-) and nitrate (NO3-) as the respective end products. In the analysis the reactor was divided into a "stagnant film" with position-dependent concentrations adjacent to a representative carrier bead and a well-mixed bulk solution. It was found that the concentration of NO was relatively uniform in the film. In contrast, essentially all of the O2- was calculated to be consumed within approximately 2 microm of the cell surfaces, due to its reaction with NO to yield peroxynitrite. The decomposition of peroxynitrite caused its concentration to fall to nearly zero over a distance of approximately 30 microm from the cells. Although the film regions (which had an effective thickness of 63 microm) comprised just 2% of the reactor volume and were predicted to account for only 6% of the NO2- formation under control conditions, they were calculated to be responsible for 99% of the NO3- formation. Superoxide dismutase in the medium (at 3.2 microM) was predicted to lower the ratio of NO3- to NO2- formation rates from near unity to <0.5, in reasonable agreement with the data. The NO3-/NO2- ratio was predicted to vary exponentially with the ratio of O2- to NO release rates from the cells. Recently reported reactions involving CO2 and bicarbonate were found to have important effects on the concentrations of peroxynitrite and nitrous anhydride, two of the compounds that have been implicated in NO cytotoxicity and mutagenesis.     

Approximation Algorithms for <Emphasis Type="Italic">k</Emphasis>-hurdle Problems

The polynomial-time solvable k-hurdle problem is a natural generalization of the classical s-t minimum cut problem where we must select a minimum-cost subset S of the edges of a graph such that |p∩S|≥k for every s-t path p. In this paper, we describe a set of approximation algorithms for “k-hurdle” variants of the NP-hard multiway cut and multicut problems. For the k-hurdle multiway cut problem with r terminals, we give two results, the first being a pseudo-approximation algorithm that outputs a (k−1)-hurdle solution whose cost is at most that of an optimal solution for k hurdles. Secondly, we provide a 2(1-\frac1r)2(1-\frac{1}{r})-approximation algorithm based on rounding the solution of a linear program, for which we give a simple randomized half-integrality proof that works for both edge and vertex k-hurdle multiway cuts that generalizes the half-integrality results of Garg et al. for the vertex multiway cut problem. We also describe an approximation-preserving reduction from vertex cover as evidence that it may be difficult to achieve a better approximation ratio than 2(1-\frac1r)2(1-\frac{1}{r}). For the k-hurdle multicut problem in an n-vertex graph, we provide an algorithm that, for any constant ε>0, outputs a ⌈(1−ε)k⌉-hurdle solution of cost at most O(log n) times that of an optimal k-hurdle solution, and we obtain a 2-approximation algorithm for trees.     

Crosslinking-property relationships in PMR polyimide composites. Part I

This study examines for the first time how matrix crosslinking affects the composite physical and mechanical properties of a graphite fiber reinforced PMR polyimide composite during long-term isothermal aging. Unidirectional composite specimens of Celion 6000/PMR-P1 were isothermally exposed at 288°C in air for various time periods up to 5000 h. The matrix crosslink densities were estimated from the kinetic theory of rubber elasticity and shifts in the glass transition temperatures (T_gs). The T_g, coefficient of thermal expansion, density, weight loss, moisture absorption, and elevated temperature flexural and interlaminar shear properties were also determined. Several linear relationships were found between the matrix crosslink density and composite physical and mechanical properties. The T_g, initial weight loss and density, and elevated temperature interlaminar shear strength increase with an increase in crosslink density. Conversely, the initial moisture absorption and coefficient of thermal expansion decrease with increasing crosslink density. As expected, the elevated temperature flexural strength and modulus show no direct correlations with crosslink density. Further, after achieving the highest matrix crosslink density, several of the composite properties begin to decrease rapidly. These findings suggest that time-temperature dependent nature of attaining the maximum matrix crosslinking is closely linked to the onset of the composite property degradation. Though much more work is needed, a fundamental understanding of the relationships between matrix crosslinking and composite physical and mechanical property can provide a scientific basis for the prediction of the extent of composite service life not only for PMR polyimides but also for other thermosetting matrix resins, such as epoxies and bismaleimides.     

Optimal security hardening on attack tree models of networks: a cost-benefit analysis

Researchers have previously looked into the problem of determining whether a given set of security hardening measures can effectively make a networked system secure. However, system administrators are often faced with a more challenging problem since they have to work within a fixed budget which may be less than the minimum cost of system hardening. An attacker, on the other hand, explores alternative attack scenarios to inflict the maximum damage possible when the security controls are in place, very often rendering the optimality of the controls invalid. In this work, we develop a systematic approach to perform a cost-benefit analysis on the problem of optimal security hardening under such conditions. Using evolutionary paradigms such as multi-objective optimization and competitive co-evolution, we model the attacker-defender interaction as an “arms race”, and explore how security controls can be placed in a network to induce a maximum return on investment.     

Linear modulation optically stimulated luminescence and thermoluminescence techniques in Al2O3:C

An analysis of the linear modulation-OSL (LM-OSL) peak and the main TL peak from irradiated Al2O3:C is presented. Data are presented indicating that the LM-OSL peak is composed of three overlapping components originating from populated traps with optical cross sections of 10(-18) - 10(-20) cm2. Studies of the main TL peak before and after LM-OSL measurement indicate that the first two LM-OSL components, corresponding to traps with the largest optical cross sections, originate from traps which also contribute to the low temperature side of the TL peak and that the third component, corresponding to the traps with smallest optical cross section, are due to traps that contribute to the high temperature side of the TL peak. Some consequences for dosimetry are discussed.