NO and N2O emissions from savanna soils following the first simulated rains of the season

Data on the emissions of oxides of nitrogen from the soil during the early part of the wet season are reported for nutrient-rich and nutrient-poor sandy soils at Nylsvley, South Africa. The emissions of NO_x and N₂O following the first wetting event of the season are elevated relative to subsequent events. The observed high emission rates (76 ng N-NO m^-2 s^-1) are partially attributed to the sandiness of the soil, which permits NO to diffuse out of the soil rapidly. The pulse of high emissions following wetting is maintained for approximately 72 hours, thereafter continuing at around 20 ng NO m^-2 s^-1 while the soil remains moist. The initial pulse is suggested to be due to the accumulation of a substrate pool during the dry period, coupled with an inability of plants and microbes to use it effectively during the first few days after wetting. There were no significant differences in the peak or subsequent emission rates for either NO or N₂O between two sites of differing nitrogen mineralisation potentials. N₂O emissions averaged 8% of NO_x emissions. The enhanced emissions of NO_x which follow the first wetting after a prolonged dry period do not make a very large contribution to the annual gaseous N emission budget, but could be a significant contributor to the high tropospheric ozone levels observed over southern Africa in springtime.     

Influence of uniaxial tensile strain on the performance of partially depleted SOI CMOS ring oscillators

The influence of uniaxial tensile strain on the performance of advanced partially depleted silicon-on-insulator CMOS ring oscillators is reported. Strain is applied either perpendicular or parallel to the direction of current flow by bending of thinned, fully processed wafers with a gate oxide thickness of less than 1.5 nm. Interestingly, the standby power dissipation of the ring oscillators increases for both parallel and perpendicular strains due to changes in the gate tunneling currents with strain. The on-state power dissipation decreases with parallel strain and increases with perpendicular strain consistent with the expected changes in the inversion layer piezoresistance. The speed of the ring oscillators improves with perpendicular strain and degrades with parallel strain, which can also be understood in terms of the piezoresistance changes.     

Psychotherapy as a personal relationship: A social psychological perspective.

Shows how theory and research on personal relationships can increase understanding of the therapy relationship. The article focuses on a social exchange approach to satisfaction and commitment to therapy, responsiveness in the therapy relationship, and the development of the therapy relationship (gradual or accelerated). By examining how therapy is a professional relationship and how it is similar to other personal relationships, therapists and clients may be encouraged to acknowledge the personal elements in the therapy relationship. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Opposing dependence of the electron and hole gate currents in SOI MOSFETs under uniaxial strain

The influence of tensile mechanical stress on ultrathin oxide gate currents in advanced partially depleted silicon-on-insulator MOSFETs is reported. Strain is applied uniaxially, perpendicular to the direction of current flow by bending of thinned, fully processed wafers with a gate oxide thickness of less than 1.5 nm. The gate currents of the n-channel and p-channel MOSFETS are found to change linearly and in opposite (opposing) directions as a function of uniaxial strain. The nMOS transistors generally exhibit a decrease with applied tensile strain, while the nMOS transistors show increasing gate current with strain. The observed dependences are consistent with a gate current controlled by direct tunneling and perturbed by stress-induced changes in the energy band structure.     

Hole Mobility and Thermal Velocity Enhancement for Uniaxial Stress in Si up to 4 GPa

A theoretical study of the response of hole mobility and thermal velocity, both relevant for short channel devices, to [110] uniaxial stress in Si up to 4 GPa of both tension and compression has been conducted. The strained-Si bandstructure was calculated using the kmiddotp method. Effective masses, thermal velocities, and scattering rates were calculated from the bandstructure as a function of stress. Mobilities were then calculated via full band Monte Carlo simulations. Calculated mobilities match experimental and theoretical data from prior work addressing lower degrees of stress. Large increases in both carrier thermal velocities and mobilities were found. In the high-stress regime between 1 and 2 GPa, mobilities exhibit a strong superlinear dependence, and compressive stress becomes more favorable for increasing both mobilities and thermal velocities in pMOS. Improvements in both thermal velocity and mobility finally only begin to rolloff toward apparent saturation as we push the stress toward 4 GPa in these simulations     

Application of local error method to SSSF simulation of vector propagation in dispersion compensated optical links

A local error method based on an analytical scheme previously developed for the scalar optical fiber channel is applied to the second-order symmetrized split-step Fourier simulation of polarization multiplexed signal propagation through dispersion compensated optical fiber links. It is found that the global simulation accuracy for the vector propagation can be satisfied using the local error bound from a scalar propagation model for the same global error over a large range of simulation accuracy, chromatic dispersion, and differential group delay. Furthermore, carefully designed numerical simulations are used to show that similar local simulation error are obtained for vector simulations and that the similar local error leads to higher computational efficiency compared to other prevalent step-size selection schemes. The scaling of the global simulation error with respect to the number of optical fiber spans is demonstrated, and global error control for multi-span simulations is proposed. Combining the local error and global error control, the developed simulation scheme can significantly speed up the time-consuming simulations in coherent optical fiber communication system analysis and design.     

Clinical psychology in Poland.

Discusses the history and current practice of clinical psychology in Poland, focusing on recent developmental trends and the educational standards and practices used in the training of Polish clinical psychologists. The preparation of students for the Magister (master's degree) in clinical psychology includes basic courses in psychology, specialization in 1 of 4 clinical areas (adult clinical, child clinical, neuropsychology, or forensic psychology), sensitivity training, and on-site practicum training. Doctoral work includes research and often emphasizes teaching more than in the US. Settings in which clinical psychologists work, programs in which they are involved, and the orientation or style of their work are described. Differences in psychological practices between Eastern and Western countries are examined in the context of sociocultural and political differences. (6 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Optical-fiber sensor using tailored porous sol-gel fiber core

A new concept in optical-fiber chemical sensors, the active fiber core optical sensor (AFCOS), is presented. In this sensor, the fiber core acts as a transducer. The sensitivity of an AFCOS sensor is compared with that of an active coating [evanescent wave (EW)] based optical-fiber sensor. Requirements for a fiber core to act as a chemical sensor are discussed. Novel techniques for making a porous sol-gel silica fiber, doping chemical reagents into the fiber, and constructing a chemical sensor using the porous fiber as a transducer have been developed. The microstructure of the fabricated sol-gel silica fiber and the effect of the fiber's microstructure on the capability of the porous sol-gel silica fiber for guiding light are discussed. A humidity sensor employing a CoCl/sub 2/-doped porous sol-gel fiber as a transducer has been constructed as an example. The test results for the humidity sensor verified a theoretical analysis indicating that an optical-fiber chemical sensor using an active fiber core as a transducer has a much higher sensitivity than that of an EW-based sensor.     

Low-voltage CMOS circuits for analog iterative decoders

Iterative decoders, including Turbo decoders, provide near-optimal error protection for various communication channels and storage media. CMOS analog implementations of these decoders offer dramatic savings in complexity and power consumption, compared to digital architectures. Conventional CMOS analog decoders must have supply voltage greater than 1 V. A new low-voltage architecture is proposed which reduces the required supply voltage by at least 0.4 V. It is shown that the low-voltage architecture can be used to implement the general sum-product algorithm. The low-voltage analog architecture is then useful for implementing Turbo and low-density parity check decoders. The low-voltage architecture introduces new requirements for signal normalization, which are discussed. Measured results for two fabricated low-voltage analog decoders are also presented.