Metabolic-heat relation for aerobic yeast respiration and fermentation

A specially developed temperature control system on a laboratory scale fermenter enabled continuous measurement of the rate of heat production during undisturbed growth of microbial cultures. Apart from being correlated with oxygen uptake rate, the heat of fermentation was established as an additional indicator of metabolic activity. The ‘aerobic respiration’ energetic activity of Candida utilis, Candida lipolytica and Saccharomyces cerevisiae on different carbon substrates was investigated with cultures of the latter species being also studied under the ‘aerobic fermentation’ conditions induced by glucose catabolite repression.     

Axial pressure profiles in non-newtonian flow: Part I: Theoretical and experimental considerations

The flow behavior of polymeric fluids in tubes can be determined from measurements of the radial stress profile in the flow direction. This subject, the focus of our research, will be examined in Part II of this communication. Part I describes a research designed to test the accuracy of stress measurement with pressure transducers in a variety of recess mount geometries. No mount geometry errors were detected for the fluids used in this work over a shear rate range of 1 to 2000 sec^?1. Part I also contains a survey of the literature and theoretical considerations pertinent to the entire work.     

The roles of group supervision of supervision.

This article recommends that group supervision of supervision be an integral part of the curriculum of any senior professional who is involved in regular supervision of trainees. Work in the group setting enables use of group dynamics to understand therapeutic events as well as processes of mirroring and identification in the supervision. The supervisory group may promote feelings of security and containment in the supervisors while attenuating and minimizing their potential feelings of vulnerability and validating their perceptions of reality. At the same time, such a group gives rise to difficulties (owing to issues of trust and confidentiality) both inside and outside the group (e.g., among trainees who develop fantasies about the proceedings of the group). Some general resolution of such problems is presented here. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Israeli psychotherapists' reactions and perceptions on the process of psychotherapy during the Gulf War.

64 26–56 yr old psychotherapists (38 still in training), who practiced in areas that were either directly or indirectly threatened by missile attack during the Persian Gulf War, completed a questionnaire addressing well-being as affected by the war, the similarity between the patient's and the therapist's experience of the war, and how psychotherapists perceived the overall functioning of their patients and the extent that their internal conflicts were affected by the war. Therapists more directly threatened by the war reported having a greater positive mood than did Ss more indirectly threatened. Experienced psychotherapists addressed the war to a greater degree during the therapeutic hour; inexperienced Ss reported a greater change in their therapeutic stance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Bed expansion in high velocity fluidization

Bed expansion of fine powders was investigated in two high aspect ratio fluid beds, an expanded top bed and a circulating system. The range of gas velocities (0.07 – 8 m/s) spanned the bubbling/slugging, turbulent, fast, and dense conveying fluidization regimes. The two-phase theory was shown generally not to apply in the slugging and the higher velocity fluidization regimes. A modified Richardson-Zaki approach, using an ‘effective’ cluster terminal velocity, was shown to adequately describe bed expansion. Changes in slope of the expansion curve were associated with regime changes, and can prove useful for the analysis of large diameter fluid beds. The effect of particle size distribution was shown to be considerable.     

Quasi‐One Dimensional in‐Plane Conductivity in Filamentary Films of PEDOT:PSS

The mechanism and magnitude of the in‐plane conductivity of poly(3,4‐ethy‐lenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) thin films is determined using temperature dependent conductivity measurements for various PEDOT:PSS weight ratios with and without a high boiling solvent (HBS). Without the HBS the in‐plane conductivity of PEDOT:PSS is lower and for all studied weight ratios well described by the relation $ \sigma = \sigma _0 {\rm exp}[- \left({{{{T_0}}\over{T}}} \right)^{0.5}] $ with T₀ a characteristic temperature. The exponent 0.5 indicates quasi‐one dimensional (quasi‐1D) variable range hopping (VRH). The conductivity prefactor σ₀ varies over three orders of magnitudes and follows a power law σ₀∝c^3.5_PEDOT with c_PEDOT the weight fraction of PEDOT in PEDOT:PSS. The field dependent conductivity is consistent with quasi‐1D VRH. Combined, these observations suggest that conductance takes place via a percolating network of quasi‐1D filaments. Using transmission electron microscopy (TEM) filamentary structures are observed in vitrified dispersions and dried films. For PEDOT:PSS films with HBS, the conductivity also exhibits quasi‐1D VRH behavior when the temperature is less than 200 K. The low characteristic temperature T₀ indicates that HBS‐treated films are close to the critical regime between a metal and an insulator. In this case, the conductivity prefactor scales linearly with c_PEDOT, indicating the conduction is no longer limited by a percolation of filaments. The lack of observable changes in TEM upon processing with the HBS suggests that the changes in conductivity are due to a smaller spread in the conductivities of individual filaments, or a higher probability for neighboring filaments to be connected rather than being caused by major morphological modification of the material.     

Effect of temperature on fermentation kinetics of waste sulphite liquor by Saccharomyces cerevisiae

The optimum operating temperatures for the maximum production of ethanol and the maximum utilization of substrate in batch fermentations of a waste sulphite liquor (WSL) as well as a synthetic medium using Saccharomyces cerevisiae were determined. The fastest consumption of substrate resulting in the shortest fermentation times of 13 h and 45 h was achieved at 35°C and 30°C for the synthetic medium and the WSL, respectively. The concentrations of ethanol in the two media were also maximum under these conditions: 11.6g dm^?3 and 9.4 g dm^?3 for the synthetic medium and the WSL, respectively. The productivities of biomass and ethanol increased with the increase of temperature and reached maximum values of 0.89 g dm^?3 h^?1 and 0.21 g dm^?3 h^?1 in the synthetic medium and the WSL, respectively. The inhibiting agents in the waste sulphite liquor affected the metabolic rates of microbial activities and prolonged the overall fermentation time while decreasing the productivities of biomass and ethanol. From analysis of the fermentation kinetics a mathematical model based on the Monod model was developed to describe the cellular growth and ethanol production. The model included inhibition terms for ethanol and the inhibiting agents in the waste liquor. The temperature dependence of the model parameters followed the Arrhenius law for temperatures between 15°C and 35°C. The activation energies (E) and the frequency constants (A) of these parameters were also determined.     

Axial pressure profiles in non-newtonian flow: Part II: Viscometric flow and relaxation phenomena analyses

Extensive pressure profile data were compiled for a 16.5% polyisobutylene solution in mineral spirits. Values of stored elastic energy obtained from these data compare favorably with those ascertained from die swell and from entrance correction methods. The viscometric normal stress differences were significantly larger than the shear stress and, particularly, the second normal stress rose to a maximum where it was an order of magnitude larger than the first normal stress difference. Time constants calculated from swell decay and entrance-borne elastic stress relaxation are essentially the same and show an approximate inverse relation to the shear rate.