磁悬浮列车传感器信号传输系统分析

磁悬浮列车传感器系统采用屏蔽双绞线传输数字传感器信号;磁悬浮列车传感器信号传输系统具有典型的传输线系统特点;研究了系统始端内阻抗与终端阻抗对信号传输的影响;分析了在终端为网络变压器时,传输线对信号传输的影响;提出了在有限负载阻抗条件下,阻抗匹配的设计要求;实验证明在有限阻抗负载条件下,并联终端匹配比始端串联匹配具有明显优势。     

Ultra-Stretchable Monofilament Flexible Sensor with Low Hysteresis and Linearity based on MWCNTs/Ecoflex Composite Materials

Wearable human–computer interaction equipment is a common technology, which can improve the comfort, convenience, and safety of the human body, and also can monitor human health. The flexible and wearable tensile sensor can be conveniently installed on clothes or directly connected to the body. This provides a convenient, timely, and portable solution for the detection of human motion. Therefore, wearable electronic equipment is gaining more attention. In this paper, a highly stretchable, flexible, and sensitive strain sensor which is based on multi-walled carbon nanotubes/Ecoflex nanocomposites is reported. A monofilament tensile sensor obtains good linearity (10.77%), low hysteresis (1.63%), good stability (6000 cycles under 100% strain), and ultra-high strain range (ε = 1300%). This ultra-stretchable sensor has potential applications in human motion monitoring, medical rehabilitation, health monitoring, human–computer interaction, and soft robots.     

Low Dielectric Polyimide/Fluorinated Ethylene Propylene (PI/FEP) Nanocomposite Film for High-Frequency Flexible Circuit Board Application

The low dielectric polymer films have drawn great attention to the application as the dielectric insulating materials in high-frequency circuit boards, while the weak adhesion to the copper foils and the poor processability resulted from the fluorinated or rigid structures limited their high-frequency application. In this work, the low dielectric and high adhesive polyimide/fluorinated ethylene propylene (PI/FEP) nanocomposite film for high-frequency flexible circuit board application is developed. It is indicated that the fluorocarbon surfactants can significantly improve the dispersion of FEP in PI substrate, and thus, the PI/FEP nanocomposite film exhibits excellent mechanical properties, including the tensile strength increases to 46.6 MPa and the elongation at the break increases to 13.7%. Importantly, at the high-frequency of 10 GHz, the 60 wt% FEP filled PI nanocomposite film displays an ultralow dielectric loss (0.006) and a reduced dielectric constant (2.69). In addition, the high-frequency flexible circuit board with the PI/FEP film as the dielectric insulating layer has a high peel strength of 0.75 N mm⁻¹, indicating this PI/FEP nanocomposite film can meet the requirements of the high-frequency flexible circuit board application.     

毛坝1号隧道涌水成因机制分析

公路深埋隧道在施工过程中经常碰到涌突水灾害,它对工程施工及区域环境都有很重要的影响,本文针对毛坝1号隧道出口端发生长大涌突水等问题,通过水文地质综合调查方法,分别从地形地貌、地层岩性、地质构造和隧址区水文地质特征等多角度,论述该隧道在施工过程中发生涌水的成因机制,为今后在类似地质条件下深埋隧道的勘察设计提供借鉴和帮助。     

企业ERP系统的二次开发

企业使用ERP等信息化系统。企业经过十多年的发展逐渐认识原有企业管理软件和管理模式已经大大不能满足企业业务发展的要求。成为制约企业高效运转的一个重要瓶颈,所以引进先进的企业管理软件和管理模式势在必行。     

固体激光器晶体吸收光场的设计仿真

设计了3类8种二极管侧面泵浦结构,构建了相应的泵浦光学理论模型,采用有限元分析方法,计算了不同结构下的吸收效率和矩阵元素标准差。首先,在给定泵浦总功率、芯片间距、掺杂浓度等前提下,随着泵浦距离在0～5 mm内递增,8种泵浦结构中激光晶体的吸收效率呈降低趋势,矩阵元素标准差也逐渐减小,其中部分结构在近距离(0～0.3 mm)泵浦时矩阵元素标准差变化程度较大,在实际应用中应避免泵浦距离处于近距离区间。其次,在相同结构参量下,随着晶体掺杂浓度在0.6%～1.0%内增加,激光晶体的吸收效率提高,同时,掺杂浓度提升也是造成截面中心峰值降低或半径方向上光场凹陷的原因。因此,掺杂浓度和泵浦距离的匹配将是提升半径方向上均匀性分布的有效手段。     

光储直流微网混合储能控制策略研究

混合储能相较于单一储能可以更好地解决微电网电压、频率波动等问题。为了充分利用混合储能系统的优势,使各储能电池优势互补,并考虑到储能变换器弱阻尼、低惯性的特点,提出了基于虚拟直流发电机控制的混合储能单元分频控制策略。该控制策略在混合储能单元分频控制的基础上,对功率密度电池储能变换器采用虚拟直流发电机控制,以增大功率密度型储能的阻尼和惯性,提升直流母线电压的动态稳定性。为验证其有效性,在微源变化和负荷波动2种工况下与传统下垂控制进行仿真对比分析,结果表明所提策略可使母线电压的波动范围限制在±0.75%以内,增强了系统的鲁棒性和稳定性并优化了储能单元的充放电性能。     

在线会议管理系统中Cookies安全应用的研究

本文首先介绍了在线会议管理系统的体系架构,然后详细分析了该系统中存在的Cookie及其安全问题,并提出了具体的解决方案。     

A security carving approach for AVI video based on frame size and index

Recovery of fragmented files is an important part of digital forensics. Video files are more likely to be fragmented since their sizes are relatively large that recovering video files without the file system information is meaningful. This paper presents a video recovery technique of a fragmented video file using the frame size information in every frame and the index. Many existing video recovery techniques attempt to recover videos using file system information or header/footer flag. These approaches may fail in the situations which the file system information is unknown or videos are fragmented. The proposed method addresses how to extract AVI file fragments from data images and map all the extracted fragments into original order. Experiments result show that mapping the AVI fragments according to the frame size information in every fragment and index is credible and the non-overwritten part of the fragmented video can be recovered using the method.