New software developments for quality mesh generation and optimization from biomedical imaging data

In this paper we present a new software toolkit for generating and optimizing surface and volumetric meshes from three-dimensional (3D) biomedical imaging data, targeted at image-based finite element analysis of some biomedical activities in a single material domain. Our toolkit includes a series of geometric processing algorithms including surface re-meshing and quality-guaranteed tetrahedral mesh generation and optimization. All methods described have been encapsulated into a user-friendly graphical interface for easy manipulation and informative visualization of biomedical images and mesh models. Numerous examples are presented to demonstrate the effectiveness and efficiency of the described methods and toolkit.     

Structures and electronic properties of surface/edges of nanodiamond and nanographite

The structure, electronic and magnetic properties of nanodiamond and nanographite/nanographene are investigated. Detonation nanodiamond particles that are covered with amorphous graphitic composites are hydrothermally treated to remove the graphitic surface composites and to terminate the surface carbon atoms with hydrogen. The number of localized spins of dangling bonds and the hydrogen concentration increase upon the increase in the hydrothermal treatment time up to 40 h. Above 40 h, both drop discontinuously, a surface structural reconstruction was suggested. The creation of dangling bonds and an incomplete hydrogenation of the surface carbon atoms destabilize the surface, resulting in the structural reconstruction. Nanodiamond particles are thermally converted to nanographite/nanographene. A single nanographene sheet is successfully prepared by heat-treating nanodiamond particles. The edge of graphene sheet with its edge carbon atoms being hydrogen-terminated is investigated by UHV-STM/STS. Zigzag edges are found to have non-bonding π-state of edge origin, in good agreement with theoretical prediction.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Multiscale modeling in rodent ventricular myocytes

This paper indicates that in ventricular myocytes when the SR (sarcoplasmic reticulum) is pharmacologically inhibited, the intracellular Ca²⁺concentration rapidly increases during Ca²⁺ entrance (0-70 ms), whereas the decay of Ca²⁺ is slow; in the absence of fluorescent dye, large Ca²⁺ concentration gradients might develop near the cell membrane; intracellular Ca²⁺ distribution is tightly regulated by the localization of Ca²⁺transporter proteins along the sarcolemma and strongly relays on the presence of mobile and stationary Ca²⁺ buffers. These studies also imply that in ventricular cells with intact and functional SR, the Ca²⁺ signal most likely would spread faster along the t-tubular system, surface membrane than to the cell interior and that in the absence of Ca²⁺ dye high Ca²⁺ gradients under the surface membrane and more uniform Ca²⁺ distribution in the cell interior might be expected.     

Forecasting electric power generation in a photovoltaic power system for an energy network

Recently, there has been an increase in concern about the global environment. Interest is growing in developing an energy network by which new energy systems such as photovoltaic and fuel cells generate power locally and electrical power and heat are controlled with a communication network. We developed the power generation forecast method for photovoltaic power systems in an energy network. The method makes use of weather information and regression analysis. We carried out forecasting power output of the photovoltaic power system installed in Expo 2005, Aichi Japan. As a result of comparing measurements with prediction values, the average prediction error per day was about 26% of the measured power. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(4): 16–23, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20755     

Study of shunt type SFCL equipped with electromagnetic repulsion switch for large capacity

Using a high‐temperature superconductor, we constructed and tested a model Superconducting Fault Current Limiter (SFCL). The SFCL that we proposed has a vacuum interrupter with electromagnetic repulsion mechanism. We set out to construct a high‐voltage‐class SFCL. We produced an electromagnetic repulsion switch equipped with a 24‐kV vacuum interrupter (VI). However, the opening speed becomes slower, because the larger vacuum interrupter needs a heavier‐weight contact. For this reason, the current which flows in a superconductor may not be interruptible within a half cycle of current. In order to solve this problem, it is necessary to change the design of the coil connected in parallel and to strengthen the electromagnetic repulsion force at the time of opening the vacuum interrupter. Thus, the design of the coil was changed, and in order to examine whether the problem is solvable, a current limiting test was conducted. We carried out a current limiting test using second‐generation (2G) HTS wire. The element used in this experiment has a stainless steel stabilizer on both sides of the wire. In the experiment we succeeded in interrupting the current of a superconductor within a half cycle. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(4): 20–27, 2010; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21039     

An autopsy case of primary squamous cell carcinoma of the liver associated with hepatitis C virus antibody positive liver cirrhosis

An increase in potassium (K) intake may lower blood pressure (BP), but inconsistent results have been obtained in clinical trials. We studied the effects of K supplementation in hypertensive patients with monitoring of home and ambulatory BP. Fifty-five patients with essential hypertension (26 men, 29 women, 36-77 years old) participated in this study. A 4-week K supplementation period and 4-week control period were assigned in a randomized crossover manner. During the K period, the subjects were given 64 mmol/day of K as slow-release KCl tablets. Office, home, and 24-h BP, as well as serum and urinary electrolytes, were measured at the end of each period. In the control period, office, home, and 24-h BP were 151 +/- 2/88 +/- 1 (mean +/- SE), 138 +/- 1/83 +/- 1, and 137 +/- 1/81 +/- 1 mm Hg, respectively. Serum K increased from 4.15 +/- 0.04 to 4.42 +/- 0.05 mmol/L, and urinary K increased from 54 +/- 2 to 96 +/- 3 mmol/day with the K supplementation. Office, home, and 24-h BP were significantly lower in the K period than in the control period, although the differences were small (2.7 +/- 1.1/1.4 +/- 0.6, 3.6 +/- 0.9/1.7 +/- 0.5, 3.4 +/- 1.0/1.2 +/- 0.5 mm Hg, respectively). Changes in home and 24-h systolic BP with K supplementation were highly significant (P < .001), compared with office BP (P < .05). The change in 24-h systolic BP was correlated negatively with baseline BP and urinary Na/K ratio, and positively with baseline urinary K excretion. The changes in daytime and nighttime BP were comparable. These results indicate that increasing K intake lowers BP in hypertensive subjects, especially in those with higher BP and lower K intake. Our study supports the usefulness of K supplementation in the treatment of hypertension, although its antihypertensive effect may be small.     

Development of anchored oligothiophenes on substrates for the application to the tunable transparent conductive films

Bis(triethoxysilyl)-substituted oligothiophene with a moderate π-conjugation length was newly synthesized and polymerized to give a polysilsesquioxane network having oligothiophene units dispersed homogeneously without phase separation. The polymer was fixed on glass or ITO substrate by spin-coating and annealing. The resulting film exhibited a high mechanical strength due to the covalent bonding with the substrates, and was electrochemically stable even after 300 redox cycles in electrolyte solution. Chemical oxidation of the polymer films yielded electrically conductive and almost transparent films.     

Electron cyclotron resonance plasma production by using pulse mode microwaves and dependences of ion beam current and plasma parameters on the pulse condition

We measure the ion beam current and the plasma parameters by using the pulse mode microwave operation in the first stage of a tandem type ECRIS. The time averaged extracted ion beam current in the pulse mode operation is larger than that of the cw mode operation with the same averaged microwave power. The electron density n(e) in the pulse mode is higher and the electron temperature T(e) is lower than those of the cw mode operation. These plasma parameters are considered to cause in the increase of the ion beam current and are suitable to produce molecular or cluster ions.