Electro-copolymerisation of indene and styrene

Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation.     

KINETICS FOR LOW TEMPERATURE PYROLYSIS OF BLACK LIQUOR

A kinetic study of pyrolysis of dried black liquor was performed using a Netzsch 429 Thermogravimetric Analyzer. It was found that as conversion increases from 10 to 45% the apparent pyrolysis activation energy for black liquor increases from 77.20 to 112.74 KJ/mol. For black liquor the order of reaction was found to be first-order. The reaction rate constant was found to be 2.12×10⁹ min. These results are in agreement with the data reported by other investigators on biomass pyrolysis.     

Fuzzy rule interpolation for multidimensional input spaces in determining d50c of hydrocyclones

Fuzzy rule-based systems have been very popular in many engineering applications. In mineral engineering, fuzzy rules are normally constructed using some fuzzy rule extraction techniques to establish the determination model in predicting the d50c of hydrocyclones. However, when generating fuzzy rules from the available information, it may result in a sparse fuzzy rule base. The use of more than one input variable is also common in hydrocyclone data analysis. This paper examines the application of fuzzy interpolation to resolve the problems using sparse fuzzy rule bases, and to perform analysis of fuzzy interpolation in multidimensional input spaces.     

Rheumatic heart disease in India

A cross-sectional study was carried out in rural areas of Jawan Block, District Aligarh, Uttar Pradesh, India, covering a total population of 3760 drawn from 11 villages. The total number of confirmed cases of rheumatic heart disease was 24 with a prevalence rate of 6.4 per 1000 of the general rural population. The prevalence of rheumatic heart disease increased with age until the age of 25 years. Females were more prone to rheumatic heart disease compared to males. Socio-economic class had a direct impact on the occurrence of rheumatic heart disease.     

A new deep intuitionistic fuzzy time series forecasting method based on long short-term memory

The Journal of Supercomputing - In recent years, deep artificial neural networks can have better forecasting performance than many other artificial neural networks. The long short-term memory...     

Temporal patterns in phytoplankton,zooplankton and fish composition,abundance and biomass in Shirati Bay,Lake Victoria,Tanzania

Shirati Bay is among the important breeding and nursery sites for major fish species in Lake Victoria. Weekly samplings were conducted to assess the temporal patterns in phytoplankton, zooplankton and fish composition, abundance and biomass in relation to prevailing water quality parameters. The study also determined the influences of plankton dynamics and water quality on the fish catch composition and biomass. It was hypothesized that temporal patterns in the composition, abundance and biomass in the plankton in the bay are controlled by water quality parameters that, in turn, affect the composition and biomass of fish catches. The phytoplankton comprised mainly cyanophytes and bacillariophytes, while the zooplankton were dominated by copepods. The heavy rain season exhibited a significantly higher plankton abundance and biomass than the dry season. The plankton abundances in both seasons exhibited significant positive correlations with water temperature and transparency. The phytoplankton community was controlled by calanoid and cyclopoid species. At higher trophic levels, Lates niloticus juveniles, Oreochromis niloticus juveniles and haplochromines controlled Cladocera and Cyclopoid copepods, while Tilapia rendalli juveniles controlled the Rotifera. This study revealed that Cyanophyta and Bacillariophyta are the dominant phytoplankton, whereas cyclopoids dominate the zooplankton species in the bay. These dominant plankton groups are partly controlled by rainfall, water temperature and transparency. Fish biomass, zooplankton and phytoplankton exhibit a typical predator–prey inverse relationship. Thus, evaluation of the plankton composition, abundance and biomass should be mandatory during fisheries stock assessments to effectively manage the fishery resources in the bay.     

A modified genetic algorithm for forecasting fuzzy time series

Fuzzy time series approaches are used when observations of time series contain uncertainty. Moreover, these approaches do not require the assumptions needed for traditional time series approaches. Generally, fuzzy time series methods consist of three stages, namely, fuzzification, determination of fuzzy relations, and defuzzification. Artificial intelligence algorithms are frequently used in these stages with genetic algorithms being the most popular of these algorithms owing to their rich operators and good performance. However, the mutation operator of a GA may cause some negative results in the solution set. Thus, we propose a modified genetic algorithm to find optimal interval lengths and control the effects of the mutation operator. The results of applying our new approach to real datasets show superior forecasting performance when compared with those obtained by other techniques.     

A comprehensive study on RF MEMS switch

This paper emphasis on state-of-the-art of the earlier until the current trend and demand, principles, design considerations, key performance and fabrication technology of RF MEMS switch devices developed over the past few years. RF MEMS switch performance and features such as actuation voltage, insertion loss, isolation and ease with cost of fabrication and applications are compared and discussed.     

Compounding and injection molding of polybutene‐1/polypropylene blends

The effect of shear‐controlled orientation injection molding (SCORIM) was investigated for polybutene‐1/polypropylene blends. This article reports on the methods and processing conditions used for blending and injection molding. The properties of SCORIM moldings are compared with those of conventional moldings. SCORIM is based on the application of specific macroscopic shears to a solidifying melt. The multiple shear action enhances molecular alignment. The moldings were investigated with mechanical tests, differential scanning calorimetry studies, and polarized light microscopy. The application of SCORIM improved Young's modulus and the ultimate tensile strength. The gain in stiffness was greater for higher polybutene‐1 content blends. A drastic decrease in the strain at break and toughness was observed in SCORIM moldings. The enhanced molecular orientation of SCORIM moldings resulted in a featureless appearance of the morphology. Interfacial features due to segregation were visible in the micrographs of SCORIM moldings. Both conventional and SCORIM moldings exhibited form I′ in polybutene‐1. This article explains the relationship between the mechanical properties and micromorphologies. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 806–813, 2003     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.