排序方式: 共有61条查询结果,搜索用时 15 毫秒
1.
CuO—SnO2纳米晶粉料的Sol—Gel制备及表征 总被引:23,自引:2,他引:21
不用金属醇盐而以无起始物质,采用Sol-Gek法得到了平均晶粒尺寸为21-22nmCuO掺杂的SnO2粉料;运用X射线衍射(XRD),差热-失重分析(DTA-TG),透射电镜(TEM)及BET比表面(SA)测定等分析手段对粉料进行了表征,实验表明,CuO的掺杂抑制了SnO2晶粒的生长,以无机盐为原料,采用Sol-Gel法制取SnO2(CuO)纳米级晶料是切实可行的,将有利于产业化。 相似文献
2.
3.
溅射沉积Cu膜生长的Monte Carlo模拟 总被引:7,自引:0,他引:7
在本文中,我们建立了一个较完整的基于动力学晶格蒙特卡罗方法的模拟薄膜生长的三维模型,利用该模型我们研究了溅射沉积条件下粒子的沉积角度、沉积速率以及入射能量对Cu膜生长的影响.模拟结果表明Cu膜表面粗糙度会随沉积角度和沉积速率的增大而增大,而相对密度随之减小.模拟的薄膜的三维形貌显示,在薄膜的表面存在着柱状结构,这与实验是相符的. 相似文献
4.
A kinetic Monte Carlo (kMC) simulation is conducted to study the growth of ultrathin film of Co on Cu(001) surface. The many-body, tight-binding potential model is used in the simulation to represent the interatomic potential. The film morphology of heteroepitaxial Co film on a Cu(001) substrate at the transient and final state conditions with various incident energies is simulated. The Co covered area and the thickness of the film growth of the first two layers are investigated. The simulation results show that the incident energy influences the film growth and structure. There exists a transition energy where the interracial roughness is minimum. There are some void regions in the film in the final state, because of the influence of the island growth in the first few layers. In addition, there are deviations from ideal layer-by-layer growth at a coverage from 0 - 2 monolayers (ML). 相似文献
5.
6.
7.
气敏薄膜传感器SnO2:Sb的制备及性能研究 总被引:8,自引:0,他引:8
利用等离子体化学气相沉积制备了SnO2∶Sb导电薄膜。研究了膜电阻与沉积温度、电极间距及掺杂浓度间依存关系和薄膜阻温特性。测试了薄膜对NO2气体的气敏性,并进行了理论分析。 相似文献
8.
采用共沉淀法制备了一系列负载型镍铜双金属催化剂,并将其应用于蓖麻油加氢反应。考察了不同金属摩尔比、催化剂制备条件、反应温度、反应压力对蓖麻油氢化反应的影响。结果表明,在以SD-Ⅱ膨润土为载体,金属硝酸盐为反应物,镍铜摩尔比为2.5:1的条件下,制备的催化剂活性和选择性最佳。同时,在H2压力为2 MPa,反应温度为160℃条件下,反应1 h后产品氢化蓖麻油的碘值可以达到3.5 g/100 g左右、羟值达到158.9 mg/g左右,均达到国家标准的指标参数要求。该催化剂在循环使用5次后,仍未发现明显失活。实验结果表明,这种低成本、性能稳定的双金属催化剂可用于氢化蓖麻油工业化生产及连续工艺的开发。 相似文献
9.
10.