Low-Dimensional Halide Perovskites and Their Advanced Optoelectronic Applications

Nano-Micro Letters - A NiFe2O4/expanded graphite (NiFe2O4/EG) nanocomposite was prepared via a simple and inexpensive synthesis method. Its lithium storage properties were studied with the goal of...     

Laminar convection in the annulus of a double-pipe with triangular fins

A steady and laminar convective flow has been numerically simulated in the fully-developed annular region of a finned double-pipe subjected to the constant heat flux boundary condition imposed at the inner-pipe wall. Finite element method has been employed in this study. Friction factor and Nusselt number have been studied as flow characteristics against variations in the ratio of radii of the inner and the outer pipes, the fin height, the fin half angle and the number of fins. The results show significant enhancement in the heat transfer rate in both the cases when sufficient pumping power is available and when it is not. The minimum and maximum increase in the product of friction factor and Reynolds number relative to the finless geometry is more than one time and more than 40 times respectively while gain in the relative value of Nusselt number lies in the range 1–177. This provides an evidence of more than four times enhancement in the heat transfer coefficient relative to that in the pressure loss as a result of extended fin surfaces.     

Dynamic modelling of a solar hydrogen system for power and ammonia production

A new configuration of solar energy-driven integrated system for ammonia synthesis and power generation is proposed in this study. A detailed dynamic analysis is conducted on the designed system to investigate its performance under different radiation intensities. The solar heliostat field is integrated to generate steam that is provided to the steam Rankine cycle for power generation. The significant amount of power produced is fed to the PEM electrolyser for hydrogen production after covering the system requirements. A pressure swing adsorption system is integrated with the system that separates nitrogen from the air. The produced hydrogen and nitrogen are employed to the cascaded ammonia production system to establish increased fractional conversions. Numerous parametric studies are conducted to investigate the significant parameters namely; incoming beam irradiance, power production using steam Rankine cycle, hydrogen and ammonia production and power production using TEGs and ORC. The maximum hydrogen and ammonia production flowrates are revealed in June for 17th hour as 5.85 mol/s and 1.38 mol/s and the maximum energetic and exergetic efficiencies are depicted by the month of November as 25.4% and 28.6% respectively. Moreover, the key findings using the comprehensive dynamic analysis are presented and discussed.     

Influence of metal‐oxide‐supported bentonites on the pyrolysis behavior of polypropylene and high‐density polyethylene

In this article, we report on the pyrolysis of polypropylene (PP) and high‐density polyethylene (HDPE) in the absence and presence of plain and metal‐oxide‐impregnated bentonite clays [BCs; acid‐washed bentonite clay (AWBC), Zn/AWBC, Ni/AWBC, Co/AWBC, Fe/AWBC, and Mn/AWBC] into useful products. Thermal and catalytic runs were performed at 300°C in the case of PP and at 350°C in the case of HDPE for a contact time of 30 min. The effects of different catalysts and their concentrations on the overall yields and the yields of liquid, gas, and residue were studied. The efficacy of each catalyst is reported on the basis of the highest liquid yields (in weight percentage). The derived liquid products were analyzed by Fourier transform infrared spectroscopy and gas chromatography–mass spectroscopy; this confirmed the presence of paraffins, olefins, and naphthenes. The results indicate the catalytic role of impregnated BCs compared to plain BC with the optimum efficiency shown by Co/AWBC in the case of PP and Zn/AWBC in the case of HDPE toward the formation of liquid products in a desirable C range with the enrichment of olefins and naphthenes in the case of PP and paraffins and olefins in the case of HDPE compared to the thermal run. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41221.     

Three-dimensional quantitative structure-activity relationship study of nonsteroidal estrogen receptor ligands using the comparative molecular field analysis/cross-validated r2-guided region selection approach

A newly developed comparative molecular field analysis (CoMFA) technique, the cross-validated r2-guided region selection (CoMFA/q2-GRS) method, has been used to build a quantitative structure-activity relationship (3D-QSAR) for nonsteroidal estrogen receptor (ER) ligands. Ligands included in this study belong to a series of diethylstilbestrol (DES) and indenestrol analogues whose affinities for the mouse ER (mER) have been determined in our laboratory. The final model utilized 30 compounds and yielded a q2GRS (cross-validated r2, guided region selection) of 0.796, as compared to a q2 of 0.720 for conventional CoMFA, with a standard error of prediction of 0.594 at 3 principal components. This model was used to visualize steric and electrostatic features of the ligands that correspond with ER binding affinity. Results obtained from the CoMFA steric and electrostatic plots of this model have also been compared to information from the ER binding affinities of substituted estradiol analogues. This is in an effort to determine structural features of compounds in the CoMFA analysis that may correspond to those of the estradiol analogues and to further clarify the mode of binding of nonsteroidal ER ligands.     

Κ‐CN gene polymorphism in Nili‐ravi buffalo,Achai and Sahiwal cattle of Pakistan

Kappa‐casein (κ‐CN) is the subtype of casein protein, an important constituent of bovine milk protein. The current study was undertaken to investigate the genetic polymorphism in κ‐CN gene of Nili‐ravi buffalo, Achai and Sahiwal cattle of Pakistan using polymerase chain reaction–restriction fragment length polymorphism (PCR‐RFLP) technique. The Nili‐ravi buffalo was found to be monomorphic (genotype BB only) for κ‐CN gene. Achai cattle were polymorphic for κ‐CN (having three genotypes AA, AB and BB) with a frequency of 0.70, 0.18 and 0.12, respectively, while in Sahiwal cattle, both the genotypes AA and AB were found with genotypic frequencies of 0.92 and 0.08, respectively. The presence of genotype BB in Achai cattle is surprising as it is absent in most of the cattle breeds worldwide.     

The structure of never-dried cotton fibers

The X-ray photographs of fresh never-dried cotton fibers are compared with those of dried fibers. The crystallite size of never-dried cotton fibers shows no significant correlation with maturity and orientation and is about the same as those of dried cotton fibers.