排序方式: 共有67条查询结果,搜索用时 31 毫秒
1.
Synchronization of a self-excited dust density wave has been experimentally investigated in a strongly coupled dusty plasma. A dust density wave of frequency ~78 Hz is spontaneously generated from the dust void boundary due to the ion streaming instability. The electric field in the dust void region is measured, and the electric field force and ion drag force on the dust particles at the void boundary are estimated to explain the mechanism of spontaneous dust density wave excitation. Synchronization occurring through the suppression mechanism is observed by modulating the ion streaming by applying an external sinusoidal signal to the dust void. At sufficiently high modulation amplitude, the onset of period-doubling bifurcation is observed. Fast Fourier transform spectral analysis is done using time-series data obtained from high-speed video imaging. The van der Pol equation with a force term is used to correlate the observed suppression phenomena. 相似文献
2.
Solubilization of water and aqueous NaCl in mixed reverse micelles (RMs) comprising sodium bis(2‐ethylhexyl) sulfosuccinate (AOT), and polyoxyethylene (20) sorbitan trioleate or polyoxyethylene (20) sorbitan monooleate has been studied at different compositions (Xnonionic = 0–1.0) at a total surfactant concentration, ST = 0.10 × 103 mol m?3 in biocompatible oils of different chemical structures; viz., ethyl oleate (EO), isopropyl myristate (IPM) and isopropyl palmitate (IPP) at 303 K. The enhancement in water solubilization (i.e., synergism) has been evidenced by the addition of nonionic surfactant to dioctyl sulfosuccinate/oil(s)/water systems. Addition of NaCl in these systems at different Xnonionic enhances their solubilization capacities further until a maximum, ωNaCl,max is reached. ωNaCl,max and [NaCl]max (concentration at which maximization of NaCl solubilization occurs) depend on type of nonionic surfactant, its content (Xnonionic) and oil. A new solubilization efficiency parameter (SP*water or SP*NaCl) has been proposed to compare solubilization phenomena in these oils. The energetic parameters of the desolubilization process of water or aqueous NaCl in single and mixed RMs have been estimated. Energetically, the water dissolution process in oil has been found to be more exothermic as well as more organized in IPP. Overall, the dissolution of water and aqueous NaCl in mixed RMs is entropically driven process. Conductance behavior of these systems in the presence of NaCl has been investigated under different [NaCl] at 303 K. An attempt has been made to give an insight to the mechanism of solubilization phenomena, percolation in conductance and microstructures vis‐à‐vis role of biocompatible oils in these systems. 相似文献
3.
The search for fresh or potable water remains a pressing concern throughout many regions of the world. Although most of the Earth's surface is covered by oceans, the effort to provide for the world's inhabitants with fresh or potable water seems to be insurmountable; at least one billion people do not have access to clean and fresh water. The World Health Organization (WHO) reported that about 41% of the Earth's population lives in water-stressed areas, and the number of people in the water scarce regions may climb to 3.5 billion by the year 2025. Thus, innovative and cost-effective desalination technologies for producing fresh water are needed to provide practical solutions. 相似文献
4.
ABSTRACTConventional solar heat-driven single stage two bed chillers demand a large area for installation of solar thermal collector to activate the chiller, but in a highly populated tropical country open spaces is insufficient. In the intention to utilize accessible solar energy with better performance, a mathematical investigation is carried out with a three bed adsorption cooling unit working with silica gel-water pair. The studied chiller is powered by direct solar heat collected by a series of compound parabolic concentrator solar thermal collectors without any heat or mass recovery. The working principal of the chiller is, in principle, the same as the conventional two-bed adsorption chiller. However, instead of two half cycles, there are three one third cycles in the proposed chiller in which at every cycle the former desorber is kept in the precooling mode and as an adsorber for the next two one third cycles, respectively. As desorption kinetic is faster than the adsorption kinetics, this longer precooling mode helps the silica gel granules to adsorb more water molecules and increase evaporation rate. Hence, a better cooling effect of at least 1°C can be observed, increases chiller working hour after sunset for almost a further one hour. 相似文献
5.
K. C. Amanul Alam Rifat Ara Rouf Bidyut Baran Saha M. Abdul Hakim khan Francis Meunier 《传热工程》2016,37(7-8):640-649
This study investigates the performance of an adsorption chiller driven by thermal heat collected from solar collectors’ panels with heat storage. The heat is reserved in a storage tank and the reserved heat is used to drive the adsorption chiller. The investigation was carried on the climatic conditions of Dhaka, Bangladesh. Heat transfer fluid goes from the collectors to the adsorption cooling unit, then from the adsorption cooling unit to the storage tank. It is seen that heat storage is more effective than direct solar coupling; however, it requires more collectors, depending on the size of the storage tank. The analysis shows that cycle time is one of the most influential parameters for the solar-driven adsorption cooling system. It is seen that the size of the collector can be reduced if the proper cycle time is adjusted. The analysis also revealed that the system with 22 collectors (each of 2.415 m2) along with 1000 s cycle time provides better performance for the base run conditions. It is also seen that the solar-driven adsorption chiller with heat storage works well beyond the sunset time. 相似文献
6.
Bhargab Bikram Bhattacharya Bidyut Gupta Satyabrata Sarkar A.K. Choudhury 《Computers & Electrical Engineering》1984,11(1):67-78
The detection problem of bridging faults in AND-EXOR arrays is considered in this paper in a new framework. These AND-EXOR arrays are different from the arrays based on the so-called Reed-Muller canonic (RMC) expansion of functions. The multiple stuck-at fault detection test set in such arrays as already derived by Pradhan[1] has been utilized to detect bridging faults. One most important advantage of this test set is that it is independent of the function realized and it has a simple algebraic structure and hence can be generated easily. As this conventional test set is insufficient to detect all bridging faults, we propose a technique of augmenting the network with some additional observation points which take care of otherwise undetectable bridging faults. 相似文献
7.
Roy Swalpa Kumar Chanda Bhabatosh Chaudhuri Bidyut B. Ghosh Dipak Kumar Dubey Shiv Ram 《Multimedia Tools and Applications》2020,79(7-8):4783-4809
Multimedia Tools and Applications - Methods based on locally encoded image features have recently become popular for texture classification tasks, particularly in the existence of large intra-class... 相似文献
8.
Mohd Danish Turnad Lenggo Ginta Khairul Habib Ahmad Majdi Abdul Rani Bidyut Baran Saha 《传热工程》2019,40(12):1023-1032
ABSTRACTA combined analytical and experimental study was carried out to analyze the effects of cryogenic cooling on temperature during turning of AZ31C magnesium alloy. Finite element method was employed to model and simulating the cryogenic and dry turning. Results obtained from the model were found to be in good agreement with the experimental observations. For the maximum temperature at the turned surface, the difference in the experimental and predicted value observed during dry and cryogenic turning was only 4 and 8% respectively. A significant reduction in the maximum temperature on the chip surface (around 35%) and tool surface (around 29%) was observed during the cryogenic turning compared to dry turning. This reduction in temperature was an attribute of liquid nitrogen, which produces intense cooling effect around the vicinity cutting zone where heat generation takes place hence enhancing the heat transfer. The isothermal region belonging to the highest temperature on the tool surface was also reduced by about 42%. The reduction in temperature during cryogenic conditions were found to be beneficial for the machining of magnesium alloys under safe conditions, reducing the risk of ignition and explosions, and also increases the sustainability of the process. 相似文献
9.
10.
Pramit Mazumdar Bidyut Kr. Patra Korra Sathya Babu Russell Lock 《Knowledge and Information Systems》2018,55(3):571-597
Online product reviews nowadays are increasingly prevalent in E-commerce websites. People often refer to product reviews to evaluate the quality of a product before purchasing. However, there have been a large number of review spammers who often work collaboratively to promote or demote target products, which severely harm the review system. Much previous work exploits machine learning approaches to detect suspicious reviews/reviewers. In this paper, we introduce a top-down computing framework, namely GGSpam, to detect review spammer groups by exploiting the topological structure of the underlying reviewer graph which reveals the co-review collusiveness. A novel instantiation of GGSpam, namely GSBC, is designed by modeling spammer groups as bi-connected graphs. Given a reviewer graph, GSBC identifies all the bi-connected components whose spamicity scores exceed the given spam threshold. For large unsuspicious bi-connected graphs, the minimum cut algorithm is used to split the graph, and the smaller graphs are further processed recursively. A variety of group spam indicators are designed to measure the spamicity of a spammer group. Experimental study shows that the proposed approach is both effective and efficient and outperforms several state-of-the-art baselines, including graph based and non-graph based, by a large margin. 相似文献