Transient experiments from the thermal-hydraulic ADS lead bismuth loop (TALL) and comparative TRAC/AAA analysis

TALL is a medium-size experimental facility constructed at KTH, to study the steady-state and transient thermal-hydraulics performance of LBE-cooled reactors, with the primary purpose of supporting the European transmutation demonstration (ETD) using LBE-cooled accelerator-driven systems (ADS). This paper presents the results of transient experiments performed on the TALL test facility, whose aim is to provide a data base for validation of computer codes which may be used for the analysis of the safety of those systems. This paper also presents the results of the post-test calculations, carried out at PSI, using the TRAC/AAA code. The transient experiments performed include the loss of heat sink, the loss of pump, the loss of both primary and secondary flows, overpower, overcooling, heater trip, and the operational transients of start-up and shut-down. The experimental results show the excellent natural circulation performance of a LBE-cooled system which should contribute to a good safety performance. The TRAC/AAA calculations provide results which agree well with the experimental data.     

Verification of the TRACE code against the MEGAPIE transient data

Megawatt pilot target experiment (MEGAPIE) is an international project aimed at demonstrating the feasibility of a liquid lead–bismuth target for spallation facilities at a maximum beam power level of 1 MW. The thermal-hydraulics data measured during the MEGAPIE experiment was used for the TRACE code qualification for transient analysis of liquid metal cooled systems.     

RELAP5-3D code validation in the neutron-dynamic analysis of transient processes taking place in RBMK-1500 reactors

The paper presents an evaluation of RELAP5-3D code suitability to model-specific transients that take place during RBMK-1500 reactor operation, where the neutronic response of the core is important. Certain RELAP5-3D transient calculation results were benchmarked against calculation results obtained using the Russian complex neutronic-thermal-hydraulic code STEPAN/KOBRA, specially designed for RBMK reactor analysis. Comparison of the results obtained, using the RELAP5-3D and STEPAN/KOBRA codes, showed reasonable mutual agreement of the calculation results of both codes and their reasonable agreement with the real plant data.     

Development of Ignalina NPP RBMK-1500 reactor RELAP5-3D model

This paper deals with the development of an integrated thermal-hydraulics–neutronics model for RBMK-1500 reactors for the analysis of specific plant transients in which the neutronic response of the core is important. A successful best estimate coupled RELAP5-3D model of Ignalina nuclear power plant (NPP) has been developed. The validation of the thermal-hydraulic model has been performed using operational transients from Ignalina NPP. The results of the calculations obtained with the RELAP5-3D model compare reasonably with the real plant data. The RELAP5-3D nodal kinetics model provides reasonable agreement with Ignalina NPP reactor power and coolant density profiles. The eigenvalue is close to unity, indicating that reasonable values are calculated for the neutron fluxes.     

Modeling of void, fast power and graphite temperature reactivity coefficients measurements for the validation of RELAP5-3D RBMK-1500 reactor model

This paper deals with the modeling of RBMK-1500 specific transients taking place at Ignalina NPP: measurements of void and fast power reactivity coefficients, as well as change of graphite cooling conditions transient. The simulation of these transients was performed using RELAP5-3D code model of RBMK-1500 reactor. At the Ignalina NPP void and fast power reactivity coefficients are measured on a regular basis and based on the obtained experimental results the actual values of these reactivity coefficients are determined. Graphite temperature reactivity coefficient at the plant is determined by changing graphite cooling conditions in the reactor cavity. This type of transient is unique and important from the point of view of model validation for the gap between fuel channel and the graphite bricks. The measurement results, obtained during this transient, enabled to determine the thermal conductivity coefficient for this gap and to validate the graphite temperature reactivity feedback model. The performed validation of RELAP5-3D model of Ignalina NPP RBMK-1500 reactor allowed to improve the model, which in the future would be used for the safety substantiation calculations of RBMK-1500 reactors.     

Comparison of the transient behaviour of LBE-and gas-cooled experimental accelerator-driven systems

The paper presents a comparison of transient calculations for two 80-MWt MOX-fuelled experimental accelerator-driven systems (XADS), one cooled by lead-bismuth eutectic and the other by helium. The results for protected (with accelerator beam trip) and unprotected (without accelerator beam trip) transient overpower, spurious beam trip, loss of flow, loss of heat sink, and loss of coolant accidents, as well as the failure of heat exchanger tubes, are analysed for the two systems. The analysis was performed using TRAC/AAA, which is part of the PSI FAST code system. The advantages and shortcomings of the two designs from the viewpoint of their transient behaviour are discussed.