Vocal fatigue among teachers

Recordings were made at the beginning and end of workdays of teachers who experience vocal fatigue (n = 22) and those who do not experience fatigue (n = 17). Those who experienced fatigue were recorded on days in which they did and did not fatigue. Both groups evaluated their vocal characteristics, each time they made a recording. Subsequently, a listener panel evaluated the same characteristics from the recordings. Both groups estimated the amount and characteristics of their talking time, completed a psychological evaluation and provided medical histories. The authors interpret the data obtained as indicating that the vocal characteristics of teachers who fatigue and those who do not fatigue are similar on days the former group does not fatigue and that the two groups are similar in the amount and loudness of their talking time, at work and at home. However, teachers who fatigue tend to spend more time in activities that appear to be vocally demanding and are more likely to perceive situations as being anxiety producing. Teachers who fatigue tend to be in good health, but have had more hearing problems and allergies than their colleagues and more of their family members have had voice problems.     

Oxygen-induced Restructuring of a Pd/Fe3O4 Model Catalyst

We have studied the influence of oxygen on the structure and morphology of a Pd/Fe₃O₄ model catalyst using molecular beam (MB) methods, IR reflection absorption spectroscopy (IRAS) and scanning tunneling microcopy (STM). The model catalyst was prepared under ultrahigh vacuum (UHV) conditions by physical vapor deposition (PVD) and growth of Pd nanoparticles on an ordered Fe₃O₄ thin film on Pt(111). It is found that surface oxides are formed on the Pd nanoparticles even under mild oxidation conditions (temperatures of 500 K and effective oxygen partial pressures of around 10⁻⁶ mbar). These surface oxides are initially generated at the Pd/Fe₃O₄ interface and, subsequently, are formed at the Pd/gas interface. The process of formation and reduction of surface and interface oxides on the Pd particles is fully reversible in that all oxides formed can be fully reduced. As a result, the oxide phase acts like a storage medium for oxygen during oxidation reactions, as probed via CO oxidation. The process of surface and interface oxidation is directly connected with the onset of a non-reversible sintering process of the Pd particles. It is suggested that this sintering process occurs via a mobile Pd oxide species, which is stabilized by interaction with the Fe₃O₄ support. The restructuring is monitored via STM and IRAS using CO as a probe molecule. In addition to a decrease in particle density and Pd surface area, a reshaping of the particles occurs, which is characterized by the formation of well-ordered crystallites and with a relatively large fraction of (100) facets. After a few oxidation/reduction cycles at 500 K, the sintering process becomes very slow and the system shows a stable behavior under conditions of CO oxidation.     

A test house study of pesticides and pesticide degradation products following an indoor application

Preexisting pesticide degradates are a concern for pesticide biomonitoring studies as exposure to them may result in overestimation of pesticide exposure. The purpose of this research was to determine whether there was significant formation and movement, of pesticide degradates over a 5‐week period in a controlled indoor setting after insecticide application. Movement of the pesticides during the study was also evaluated. In a simulated crack and crevice application, commercially available formulations of fipronil, propoxur, cis/trans‐permethrin, and cypermethrin were applied to a series of wooden slats affixed to the wall in one room of an unoccupied test house. Floor surface samples were collected through 35 days post‐application. Concentrations of the pesticides and the following degradates were determined: 2‐iso‐propoxyphenol, cis/trans 3‐(2,2‐dichlorovinyl)‐3‐3‐dimethyl‐(1‐cyclopropane) carboxylic acid, 3‐phenoxybenzoic acid, fipronil sulfone, fipronil sulfide, and fipronil desulfinyl. Deltamethrin, which had never been applied, and chlorpyrifos, which had been applied several years earlier, and their degradation products, cis‐3‐(2,2‐dibromovinyl)‐2,2‐dimethylcyclopropane‐1‐carboxylic acid, and, 3,5,6‐trichloro‐2‐pyridinol, respectively, were also measured. Propoxur was the only insecticide with mass movement away from the application site. There was no measurable formation or movement of the degradates. However, all degradates were present at low levels in the formulated product. These results indicate longitudinal repetitive sampling of indoor degradate levels during short‐term studies, is unnecessary.     

Concept maps as the first step in an ontology construction method

A method is proposed to be used as the first step in the ontology acquisition process. This method is based on the use of concept maps as a means of expression for the expert, followed by an application that assists the expert in detailing the structure of the knowledge represented in the map. This application analyses the concept map, taking into account the map topology and key words used by the expert. From this analysis a series of questions are presented to the expert that, when answered, reduce the map ambiguity and identify some common patterns in ontological representations, such as generalizations and mereologic relations. This information can be used by the knowledge engineer during further knowledge acquisition sessions or to direct the expert to a further improvement of the map. The method was tested by a group of volunteers, most of them engineers working at the aerospace sector, and the results suggest that both the use of concept mapping as well as the refining step are acceptable from the point of view of the end user, supporting the claim that this method is viable as an option to reduce some of the difficulties in large scale ontology construction.     

Physiologic Insulin Resensitization as a Treatment Modality for Insulin Resistance Pathophysiology

Prevalence of type 2 diabetes increased from 2.5% of the US population in 1990 to 10.5% in 2018. This creates a major public health problem, due to increases in long-term complications of diabetes, including neuropathy, retinopathy, nephropathy, skin ulcers, amputations, and atherosclerotic cardiovascular disease. In this review, we evaluated the scientific basis that supports the use of physiologic insulin resensitization. Insulin resistance is the primary cause of type 2 diabetes. Insulin resistance leads to increasing insulin secretion, leading to beta-cell exhaustion or burnout. This triggers a cascade leading to islet cell destruction and the long-term complications of type 2 diabetes. Concurrent with insulin resistance, the regular bursts of insulin from the pancreas become irregular. This has been treated by the precise administration of insulin more physiologically. There is consistent evidence that this treatment modality can reverse the diabetes-associated complications of neuropathy, diabetic ulcers, nephropathy, and retinopathy, and that it lowers HbA1c. In conclusion, physiologic insulin resensitization has a persuasive scientific basis, significant treatment potential, and likely cost benefits.     

Model oxide-supported metal catalysts: energetics,particle thicknesses,chemisorption and catalytic properties

Many industrially important catalysts consist of late transition metal particles supported on the surfaces of oxide materials. Our studies of such systems using model catalysts consisting of metal films vapor deposited onto the surfaces of single-crystalline oxides are reviewed here. Systems studied include Cu on ZnO, Pt on ZnO, Au on TiO₂ and Cu, Ag and Pb on MgO. A unique adsorption microcalorimeter was developed to measure directly the energetic stability of the metal atoms on the oxide surfaces and the adhesion energy at the metal/oxide interface, which clarify the structural and chemisorption properties of the ultrathin metal particles. The structure of the oxide surface and the metal particles was elucidated by low-energy electron diffraction (LEED), low-energy ion scattering spectroscopy (ISS), angular-resolved X-ray photoelectron spectroscopy (XPS) and X-ray photoelectron diffraction (XPD). The electronic character of the metal particles was revealed by XPS, Auger electron spectroscopy (AES), band-bending and work function measurements. Sintering rates were measured by temperature-programmed ion scattering spectroscopy (TPISS). The chemisorption properties of these particles and their catalytic reactivity were monitored by mass spectroscopy and temperature-programmed desorption (TPD).     

Strength and Toughness of Slip-Cast Fused-Silica Composites

The effects of fiber composition, size, and surface treatment on the mechanical behavior of slip-cast fused-silica composites were investigated. The ambient and 1000°C stiffness and strength, fracture toughness, G _R -curve behavior, and fiber-matrix interface bond strength were determined. Quantitative fractography and scanning electron microscopy were used to ascertain the mechanisms of toughening and strengthening. Composites with weak interface bonding exhibited good strength retention and rising G _R -curve behavior. The fracture resistance was improved primarily through crack deflection.     

Computer mediated communications and developing countries

This article reviews Computer Mediated Communications (CMC), encompassing the technology and its evaluation, with emphasis on factors crucial to the introduction of this technology in developing countries. The discussion of some promising application areas for developing countries includes education, networks of specialists, international committees and trade groups, and crisis detection and management. Also included is a summary of factors important to fostering and evolving the utilization of CMC technology.     

Improved arsenic doping in metalorganic chemical vapor deposition of HgCdTe andin situ growth of high performance long wavelength infrared photodiodes

Controlled and effective p-type doping is a key ingredient forin situ growth of high performance HgCdTe photodiode detectors. In this paper, we present a detailed study of p-type doping with two arsenic precursors in metalorganic chemical vapor deposition (MOCVD) of HgCdTe. Doping results from a new precursortris-dimethylaminoarsenic (DMAAs), are reported and compared to those obtained from tertiarybutylarsine (TBAs). Excellent doping control has been achieved using both precursors in the concentration range of 3 × 1015-5 × 10¹⁷ cm⁻³ which is sufficient for a wide variety of devices. Arsenic incorporation efficiency for the same growth temperature and partial pressure is found to be higher with DMAAs than with TBAs. For doping levels up to 1 × 10₁₇ cm⁻³, the alloy composition is not significantly affected by DMAAs. However, at higher doping levels, an increase in the x-value is observed, possibly as a result of surface adduct formation of DMAAs dissociative products with dimethylcadmium. The activation of the arsenic as acceptors is found to be in the 152–50% range for films grown with DMAAs following a stoichiometric anneal. However, a site transfer anneal increases the acceptor activation to near 100%. Detailed temperature dependent Hall measurements and modeling calculations show that two shallow acceptor levels are involved with ionization energies of 11.9 and 3.2 meV. Overall, the data indicate that DMAAs results in more classically behaved acceptor doping. This is most likely because DMAAs has a more favorable surface dissociation chemistry than TBAs. Long wavelength infrared photodiode arrays were fabricated on P-on-n heterojunctions, grownin situ with iodine doping from ethyl iodide and arsenic from DMAAs on near lattice matched CdZnTe (100) substrates. At 77K, for photodiodes with 10.1 and 11.1 (im cutoff wavelengths, the average (for 100 elements 60 × 60 μm² in size) zero-bias resistance-area product, R₀A are 434 and 130 ohm-cm², respectively. Quantum efficiencies are ≥50% at 77K. These are the highest R₀A data reported for MOCVDin situ grown photodiodes and are comparable to state-of-the-art LPE grown photodiodes processed and tested under identical conditions.