Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

Threshold and growth mechanism of fatigue cracks under mode II and III loadings

ABSTRACT The fatigue crack growth behaviour of 0.47% carbon steel was studied under mode II and III loadings. Mode II fatigue crack growth tests were carried out using specially designed double cantilever (DC) type specimens in order to measure the mode II threshold stress intensity factor range, ΔK_IIth. The relationship ΔK_IIth > ΔK_Ith caused crack branching from mode II to I after a crack reached the mode II threshold. Torsion fatigue tests on circumferentially cracked specimens were carried out to study the mechanisms of both mode III crack growth and of the formation of the factory‐roof crack surface morphology. A change in microstructure occurred at a crack tip during crack growth in both mode II and mode III shear cracks. It is presumed that the crack growth mechanisms in mode II and in mode III are essentially the same. Detailed fractographic investigation showed that factory‐roofs were formed by crack branching into mode I. Crack branching started from small semi‐elliptical cracks nucleated by shear at the tip of the original circumferential crack.     

An important factor affecting synergism on coprocessing of Taiheiyo coal with Athabasca oil sand bitumen

A series of mixtures of Japanese subbituminous Taiheiyo coal and Athabasca oil sand bitumen (AOB) with various coal concentrations (0–100 wt%) was coprocessed in a 70 ml autoclave at 420°C for 1 h in the presence of H₂ (50 kg/cm² at room temperature) and sulfided Ni---Mo/Al₂O₂ catalyst. The mixture containing 2 wt% coal produced the largest amount of hexane soluble fraction (HS) and the smallest amount of benzene insoluble fraction (BI). Thus, a synergistic liquid production occurred for this mixture with 2 wt% coal by suppressing the retrogressive reactions which proceeded for pure AOB. The HS obtained from mixtures with 2–30 wt% showed higher H/C ratios and lower heteroatom contents than those obtained from pure AOB and the mixtures with more than 30 wt% coal. The amounts of transferable hydrogen contained in the mixtures were estimated using anthracene as a hydrogen acceptor. The mixtures with 2–10 wt% coal contained higher amounts of donor hydrogen than pure AOB. The HS yield from the various mixtures was correlated with the amount of donor hydrogens contained in the mixtures, except for the mixture with 10 wt% coal. Thus, the important factor which results in synergism is suggested to be the amount of donor hydrogens contained in the feed mixtures.     

EFFECTS OF VISCOSITY OF LIQUID FOODS ON PALATAL PRESSURE

The deglutition of non-Newtonian liquids introduced into the mouth was studied dynamically by measuring palatal pressure (P) with pressure transducers set at three locations on the palate. The value of P and the swallowing pressure (S) changed only from 100 to 200 g/cm² over the viscosity range 10⁻² to 10¹ Pa.s. The retaining time (T) and work (W), required for swallowing after the liquid entered the mouth, remained almost constant up to a critical value of 1.0 Pa.s. above which both T and W increased markedly. When the viscosity was low, all of the liquid was swallowed in one deglutition, up to 15 mL volume. Therefore, T was almost constant but S increased with the volume. When the viscosity was high, the liquid was swallowed in several smaller portions. When the volume was high, T increased and S was either constant or it decreased.     

Effect of the Chiral Center Position of an Optically Active Terminal Group on the Induction of Optical Activity in Polysilanes

Summary Polysilanes with an optically active alkoxy group, i.e., (S)-(+)-2-butoxy, (R)-(-)-2-butoxy, (S)-(-)-2-methyl-1-butoxy, and (S)-(+)-3,7-dimethyl-1-octoxy, at the terminal positions, the chiral carbon centers of which were located at the α, β, and γ positions relative to the oxygen, respectively, were prepared, and the effect of the position of chiral center of the terminal optically active group on the induction of optical activity in polysilanes was investigated. The circular dichroism (CD) spectra of these polymers showed positive Cotton signals around 340 nm at temperatures below -20 °C, but the intensities were small, indicating that the optically active groups at the terminal positions have some ability, albeit small, to induce optical activity to the polysilanes. Further, the optically active (S)-(+)-2-butoxy and (R)-(-)-2-butoxy groups did not control the helical sense direction of the polymers, despite the different chiral stimuli from the 2-butoxy groups introduced to the terminal positions. To control the helical structure of polysilanes by the use of optically active terminal groups, appropriate optically active groups are required.     

Fe-Cr-Mn奥氏体合金的辐照体胀与诱起晶界偏析行为的研究SCIEI

本文采用电子束辐照,研究了Fe-15Cr-xMn合金以及添加W,V合金的孔洞体胀和诱起晶界偏析行为,并对包含晶界在内的辐照区进行成分分析。结果表明,在Fe-Cr-Mn系合金中孔洞体胀孕育期可以被强烈抑制,晶界偏析也减少。特别是,合金中添加W,V效果更加明显。用Mn代替Ni,通常要发生体胀和相的不稳定性,由于反Kirkendall效应导致Ni和Mn的扩散行为不同,使Fe富集在尾闾处,局部地区形成铁素体,有利于减少体胀和晶界偏析。     

A full‐color eyewear display using planar waveguides with reflection volume holograms

Abstract— A full‐color eyewear display with over 85% see‐through transmittance with a 16° horizontal field of view was developed. Very low color crosstalk, less than 0.008 Δu′v′ uniformity, and 120% NTSC color gamut were achieved. Waveguides with two in‐ and out‐coupling reflection volume hologram elements enabled a simple configuration that has an optical engine beside the user's temples. The reflection volume hologram elements used on the waveguides realized a small thickness of 1.4 mm for each waveguide, and an out‐coupling reflection volume hologram used as an optical combiner contributed a high see‐through transmittance of 85% due to its wavelength selectivity. However, there are technical challenges in achieving a reasonable screen size and quality color images with optics that utilize holographic waveguides because holograms have large chromatic dispersions compared to conventional optical elements such as lenses and mirrors. Approaches to overcome these issues are described.     

展望21世纪新技术革命中的传感器

在回顾了以往产业革命中传感器的作用 ,比较工程传感器与人的感官的异同点之后 ,阐述了预计将于 2 1世纪爆发的新产业革命中传感器的使命及发展趋势     

双束强辐照对氧化物弥散强化铁素体型合金强化相稳定性影响

采用双束复合辐照装置,研究了He存在条件下,强辐照对长期时效后的ODS合金中强化相(Y2O3)的稳定性和辐照损伤特征的影响。实验结果表明:双束强辐照下,ODS合金中强化相不稳定,发生聚集长大并造成附近基体中Ti、Y浓度增高,导致空洞尺寸和空洞肿胀增加,并对这一结果从理论上进行解释。     

Iron Loss Analysis of Permanent Magnet Motors Fed by PWM Inverter

Carrier harmonic losses that consist of iron loss, eddy current loss, and ac copper loss are produced in a permanent magnet machine driven by a PWM inverter. It is already known that a higher motor inductance can lead to lower carrier harmonic losses. This paper investigates the carrier harmonic loss composition of two motors with identical dimensions but different inductances. The results of finite element analysis (FEA) showed that the eddy current loss in the iron core accounts for most of the carrier harmonic loss. It is also shown that the carrier harmonic loss of the iron core is quantifiable using theoretical calculations.