Optical dot gain on newsprint determined with the Lund nuclear microprobe

A technique for measuring optical dot gain, i.e. the relative difference between the actual screen dot and the optically perceived one, is presented. By combining measurements from the non-optical nuclear microprobe with data from image analyzing technique the optical dot gain can be determined. The procedure to reach pixel by pixel correlation on a micrometer scale is discussed. In the newsprint sample studied in this investigation a typical optical dot gain between 15 and 20% was deduced. The variation in the optical dot gain was correlated with other characteristic parameters of the print and newsprint and especially a positive correlation to the mass density of the newsprint was observed.     

New CAMAC based data acquisition and beam control system for Lund nuclear microprobe

A new CAMAC based data acquisition system has been installed at the Lund Nuclear Microprobe facility. This paper reports on the development and present status of the data acquisition system. The system is a true multiparameter CAMAC based system with fast Fera bus readout and in crate memory buffer. The user interface is based on Sparrow Kmax software for a Power Macintosh platform. The system read out and tag the event data with position on-line, which make fast on-line monitoring of spectra or element maps possible.Simultaneously, all data can be saved event by event for off-line analysis. The beam scanning part is software controlled through a timed D/A converter, this allows fast scanning of the beam. With a CCD-camera and video card the area to be analysed could be defined directly from the image, and the sample position can be moved. Any kind of irregular scan patterns could be defined.     

Biospecific interaction analysis using biosensor technology

Fundamental information that enhances our understanding of biospecific interactions can be obtained using a new analytical system based on biosensor technology. The functional characteristics of biospecific interaction, such as kinetics, affinity and binding position, are examined by label-free analysis of proteins in free solution binding to an immobilized ligand at a hydrophilic sensor surface.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Emission of excited potassium species from an industrial iron catalyst for ammonia synthesis

The angular dependence of potassium emission-desorption is studied from a fused iron catalyst of the type used for ammonia synthesis. The excited species (K^*, K _n ^* , etc.) and positive ions K⁺ have strongly different angular distributions. The bilobular distribution measured for ion desorption is concluded to be either due to excited atoms, so-called Rydberg atoms, or excited clusters. Both types of species have to desorb from the edges of the sample and become field ionized and deexcited just outside the sample, as reported in previous studies on an iron oxide catalyst. The peak in the normal direction measured for excited species is due to excited cluster formation outside the catalyst surface. Similarities with previous results for other catalysts are observed. The possibility that the promoter function of potassium in the ammonia synthesis is due to excited species is pointed out.On leave from Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Cracow, Poland.     

Screening of organic contaminants in urban snow

Snowmelt is known to cause peak concentrations of pollutants, which may adversely affect receiving water quality. High concentrations of metals and suspended solids in snow have been reported, whereas studies on organic pollutants are rare. This study aims at investigating the occurrence of anthropogenic organic compounds in urban snow in Gothenburg (Sweden). The most frequently detected organic pollutants in the collected snow samples were polycyclic aromatic hydrocarbons (PAHs), high molecular-weight phthalates, 4-nonylphenol and 4-t-octylphenol. Brominated flame retardants and chlorinated paraffins were only sporadically detected. In several snow samples, the concentrations of specific PAHs, alkylphenols and phthalates were higher than reported stormwater concentrations and European water quality standards. Pollutant source identification and sustainable management of snow are important instruments for the mitigation of organic contaminants in the urban environment.     

Sociomaterial actors in the assimilation gap: a case study of web service, management and IT-assimilation

This paper investigates the conditions for the assimilation of information systems (IS) and information technology (IT) in organizations and the influence of various actors in the organization and eBusiness context. To do so it draws on the literature on assimilation gap, sociomateriality and infrastructure together with a study of implementation and use of information and communication technology in and among organizations in a Swedish region. There were substantial investments in web infrastructure made on a regional level and the focus of this study is how the investments were transformed and assimilated in practices, relations and communication. Based on the empirical data from the case study, the paper extends the assimilation process into interplay among actors in organizations contexts. It describes organizations’ strategies for coping with their needs for information and the actors in these processes. Two categories of actors are identified, sensemaking and sensegiving actors, as most important in assimilation of IS/IT in organizations. A sociomaterial perspective gives guidance and a better understanding of the assimilation process in terms of knowledge and interpretative frames, and how assimilation involves identity construction and negotiations among sensemaking and sensegiving actors. The contribution of this paper is a better understanding of the context of assimilation and adaptation of IT in organizations’ business processes, and steps to be taken to improve readiness.     

Recent developments in large‐area photomasks for display applications

One of the most critical areas in the manufacturing process for FPD panels or shadow masks for CRTs is lithography. Most existing lithography technologies require high‐quality large‐area photomasks. The requirements on these photomasks include positioning accuracy (registration) and repeatability (overlay), systematic image quality errors (“mura” or display quality), and resolution (minimum feature size). The general trend toward higher resolution and improved performance, e.g., for TFT desktop monitors, has put a strong focus on the specifications for large‐area‐display photomasks. This article intends to give an overview of the dominant issues for large‐area‐display photomasks, and illustrates differences compared with other applications. The article will also present state‐of‐the‐art methods and trends. In particular, the aspects of positioning accuracy over large areas and systematic image‐quality errors will be described. New qualitative and objective methods have been developed as means to capture systematic image‐quality errors. Results indicating that errors below 25 nm can be found early in the manufacturing process is presented, thus allowing inspection for visual effects before the actual display is completed. Positioning accuracy below 400 nm (3 sigma) over 720 × 560 mm have been achieved. These results will in the future be extended up toward 1 × 1 m for generation 4 in TFT‐LCD production.     

Neural Networks Based Colour Measuring for Process Monitoring and Control in Multicoloured Newspaper Printing

This paper presents a neural networks based method and a system for colour measurements on printed halftone multicoloured pictures and halftone multi-coloured bars in newspapers. The measured values, called a colour vector, are used by the operator controlling the printing process to make appropriate ink feed adjustments to compensate for colour deviations of the picture being measured from the desired print. By the colour vector concept, we mean the CMY or CMYK (cyan, magenta, yellow, and black) vector, which lives in the three- or four-dimensional space of printing inks. Two factors contribute to values of the vector components, namely the percentage of the area covered by cyan, magenta, yellow and black inks (tonal values) and ink densities. Values of the colour vector components increase if tonal values or ink densities rise, and vice versa. If some reference values of the colour vector components are set from a desired print, then after an appropriate calibration, the colour vector measured on an actual halftone multicoloured area directly shows how much the operator needs to raise or lower the cyan, magenta, yellow and black ink densities to compensate for colour deviation from the desired print. The 18 months experience of the use of the system in the printing shop witnesses its usefulness through the improved quality of multicoloured pictures, the reduced consumption of inks and, therefore, less severe problems of smearing and printing through.