Identification and changes in the higher fatty acids of dried red pepper and red pepper powder

Summary The higher fatty acids of dried red pepper of the variety of Gorogled were identified by gas chromatography with using help of authentic compounds. Their amounts were determined using on absolute calibration method.The following acids were established: lauric, myrastic, palmitic, palmitoleic, stearic, oleic, linoleic, linolenic,arachidic and behenic acids. The results obtained from the quantitative measurements showed that linoleic, linolenic and palmitic acids amounted to 80% of the total acids.The quantitative changes of identified acids in red pepper, of dried at 60°, 70°, 80° and 90 °C red pepper and stored as dried red pepper and red pepper powder over a 6-months period investigated.The results show that under the drying temperatures applied the amount of all fatty acids decreased with an increase in the temperature. During a storage a period of 3 months the amount of the respective acids decreased while the process was the most expressed in red pepper dried at a temperature of t = 70 °C.After a 6-months storage period under the drying condition applied the dried red pepper contained a greater amount of fatty acids compared with stored for 3 months.

---

Identifikation und Veränderungen der höheren Fettsäuren von gemahlenem Paprika und von getrockneten ungemahlenen Paprikaschoten

Zusammenfassung Es wurden gaschromatographisch mit Hilfe von Vergleichsubstanzen die höheren Fettsäuren, die im gemahlenen Paprika (Sorte Gorogled) enthalten sind, identifiziert. Die Mengen wurden nach der Methode der absoluten Kalibrierung bestimmt. Es wurden folgende Säuren festgestellt: Laurinsäure, Myristin-, Palmitin-, Palmitoolein-, Stearin-, Olein-, Linol-, Linolen-, Arachin- und Behensäure. Die quantitativen Ergebnisse zeigen, daß die Menge der Linolen-, Linol- und Palmitinsäure 80% der Gesamtsäurenmenge darstellt. Es wurden die quantitativen Veränderungen der Fettsäuren von Paprika (Sorte Gorogled) bei Temperaturen von 60 °, 70 °, 80 ° und 90 °C, getrocknet und als getrockneter ungemahlener bzw.gemahlener Paprika, gelagert und innerhalb von 6 Monaten in Abständen von 3 Monaten verfolgt. Bei den angewendeten Trocknungstemperaturen nimmt die Menge der einzelnen Fettsäuren in dem getrockneten ungemahlenen Paprika mit Erhöhung der Trocknungstemperatur ab. Die Lagerung des getrockneten ungemahlenen Paprikas innerhalb von 3 Monaten führt zur Abnahme der einzelnen Fettsäuren, wobei dieser Prozeß am stärksten bei einer Trocknungstemperatur von 70 °C verläuft. Nach einer 6monatigen Lagerung des getrockneten und ungemahlenen Paprikas, nach Trocknung und bei den o. g. vier Temperaturen, ist die Menge der Fettsäuren höher im Vergleich zu jener der Fettsäuren in getrocknetem ungemahlenem Paprika nach 3 Monaten. Nach 3 Monaten enthält der gemahlene Paprika weniger Fettsäuren als der getrocknete und ungemahlene Paprika.

     

Gold supported on ceria and ceria–alumina promoted by molybdena for complete benzene oxidation

New gold–molybdena catalysts supported on ceria and ceria–alumina in reaction of complete benzene oxidation were studied. The catalysts were characterized by means of XRD, TPR, XPS and Raman spectroscopy. High and stable catalytic activity was established in the temperature region 200–240 °C. The presence of gold causes a modification in ceria structure leading to an increase of Ce³⁺ and oxygen vacancies formation. The loading of Al³⁺ increases additionally the oxygen vacancies, while a tendency of decrease of Ce³⁺ amount was observed. The presence of alumina results also in a larger share of active oxygen species proved by analysis of O 1s XPS spectra. The differences in the activities within the starting temperature range (150–180 °C) and in the region of 100% conversion (200–240 °C) could be explained by supposing that in the LT region the electron transfer between nanosized gold and ceria particles via oxygen vacancies has a crucial role. In the HT region the oxygen mobility, provoked by the defective structure of ceria due to the presence of Al³⁺, becomes of prevailing importance. It was also concluded that alumina prevents the gold and ceria agglomeration, which is the main factor to avoid deactivation under extreme reaction conditions.     

Forming post-socialist urban identities through small-scale heritage-based regeneration: a role for intangibles?

While the issue of socialist heritage in Central and Eastern Europe has been extensively researched by scholars, this paper addresses an existing gap in theory and practice ? how safeguarding socialist cultural heritage (tangible and intangible) can be used in post-socialist towns that have little emblematic resources available today to pursue urban progress and prosperity. The paper focuses on the city of Velenje in Slovenia and its collectivist means of original production. Attention is drawn to both the importance of this aspect of its intangible cultural heritage, and the problematic nature of appealing to it, to underpin citizens’ engagement in a small-scale urban regeneration project. The paper offers insights about how using cultural heritage can be called upon to motivate citizens to participate in urban development and reform their urban identity, drawing on the recent past and living memory, through volunteered labour.     

Reactor dosimetry for VVERs RPV lifetime assessment

A state of the art review of Reactor Dosimetry used for reactor pressure vessel irradiation damage assessment and lifetime evaluation of the Russian type VVER reactors is presented. The necessity of prospective studies in Reactor Dosimetry for improvements that will reduce the neutron fluence uncertainty and in this way to substantiate the extension of NPP lifetime is summarized by specialists in Reactor Dosimetry from countries operating VVER reactors such as Russia, Ukraine, Czech Republic, Finland, Hungary, and Bulgaria, together with specialists from Western European countries such as France, Spain, Germany, Belgium, The Netherlands, and UK, operating PWR and BWR type reactors.     

Purification of rosmarinic acid extracts from Lavandula vera MM cell biomass

Two approaches for purification of rosmarinic acid extracts, obtained from Lavandula vera MM cell biomass were investigated: adsorption on different Amberlite XAD resins and extraction with ethylacetate. Results showed that when ethylacetate extraction was used, 18.7 times higher level of purity compared to initial material was achieved. Similarly the obtained preparations from adsorption on Amberlite XAD-7 resin and elution with 80% ethanol contained 29.8% rosmarinic acid, which is 7.7 times higher purity compared to initial material. The precipitation of rosmarinic acid as Ca-rosmarinate was investigated as well. The obtained rosmarinic acid preparations were with low yield (34% of rosmarinic acid fell into sediment).     

Urine specific gravity and osmolarity in hypertension patients with dehydration

Results are reported from the comparative investigations of kidney concentration function by urine specific gravity and its osmolatity of 58 patients with arterial hypertension. Significant differences were found in more of the half of the patients. On the base of certain theoretical prerequisites and possibilities of technical errors was concluded that the determination of the maximal urine osmolality is a more reliable and more accurate index for the actual renal concentration ability. Urine specific gravity can be used in the everyday clinical practice due to the more convenient and easier determination. Urine osmolality must be used predominantly in scientific-clinical studies.     

Deposition and focused ion beam milling of anticorrosive CrC coatings on tool steel substrates

For micro replication, the base of a die should be ductile and the surface layer that will undergo processing should have a good machining response to various tool-making processes. At the same time, the resulting working surfaces of the tooling cavities should be hard; having low roughness, low wettability and high erosion resistance. To achieve such diverse properties, nano-crystalline CrC coatings deposited onto 12% Cr tool steel were investigated in this research. To verify the properties of such coatings various metallographic techniques were applied. In particular, the corrosion resistance was studied by means of potentiodynamic anodic polarisation. A scanning transmission electron microscopy analysis of the structure was performed on samples prepared with focused ion beam (FIB) machining. The mechanical properties and grain size distribution were determined and statistically analysed. In addition, X-ray diffraction, scanning electron microscopy and atomic force microscopy were used in studying the surface properties of these coatings. To investigate the response of the CrC coatings to micro- and nano-structuring technologies with high specific energy, a series of rectangular trenches were produced by FIB milling. The effects of the ion beam current, exposure time and ion fluence on the sputtering yield and roughness of the produced micro-structures were especially investigated. Some essential parameter windows for performing FIB milling with relatively high sputtering rates, higher than 1?µm/min, and at the same time achieving the best possible surface integrity were determined during the experiments.     

Molecular Mechanism of the Anti-Inflammatory Action of Heparin

Our objective is to reveal the molecular mechanism of the anti-inflammatory action of low-molecular-weight heparin (LMWH) based on its influence on the activity of two key cytokines, IFNγ and IL-6. The mechanism of heparin binding to IFNγ and IL-6 and the resulting inhibition of their activity were studied by means of extensive molecular-dynamics simulations. The effect of LMWH on IFNγ signalling inside stimulated WISH cells was investigated by measuring its antiproliferative activity and the translocation of phosphorylated STAT1 in the nucleus. We found that LMWH binds with high affinity to IFNγ and is able to fully inhibit the interaction with its cellular receptor. It also influences the biological activity of IL-6 by binding to either IL-6 or IL-6/IL-6Rα, thus preventing the formation of the IL-6/IL-6Rα/gp130 signalling complex. These findings shed light on the molecular mechanism of the anti-inflammatory action of LMWH and underpin its ability to influence favourably conditions characterised by overexpression of these two cytokines. Such conditions are not only associated with autoimmune diseases, but also with inflammatory processes, in particular with COVID-19. Our results put forward heparin as a promising means for the prevention and suppression of severe CRS and encourage further investigations on its applicability as an anti-inflammatory agent.