Comprehensiveness and uniqueness of commercial databases and open access systems

Scientometrics - In this study, scholarly communication systems provided by commercial services and open access systems are examined on the basis of the comprehensiveness and uniqueness of their...     

Synthesis and properties of liquid crystalline polymers with low Tm and broad mesophase temperature ranges

Novel thermotropic liquid crystalline polymers (TLCP) with improved processability and lower cost than Vectra^® were synthesized by esterification and melt polycondensation. Aromatic compounds, 6-hydroxyl-2-naphthoic acid, 2,6-naphthlenedicarboxylic acid, 4-hydroxybenzoic acid or terephthalic acid, were used as polycyclic stiff rod-like mesogenic groups. Aliphatic diol, ethylene glycol or 1,4-butanediol was used as flexible spacers to form semi-flexible main chain TLCP. The LCP products were characterized by FT-IR and ¹H NMR to identify their chemical structures. The analytical results showed the polymers had inherent viscosities of 0.35-0.54 dL/g. The crank shaft structure of the naphthalene decreased the melting temperature (T_m) of LCP (181-272 °C) to facilitate extrusion or injection molding, and maintained relatively high heat deflection temperature for high performance engineering plastics applications. The 5% weight loss decomposition temperatures were above 400 °C. LCPs have good solvent resistance and low hygroscopicity. The SEM morphology showed strong orientation on the surface in the flow direction and many micro-fibers structure in a sectional drawing. The optical textures of polymers observed by POM revealed a strong birefringence in the melts and indicated that they form nematic mesophase. All polymers have broad mesophase temperature (ΔT_meso) ranges.     

Synthesis and properties of polyimide (containing naphthalene) nanocomposites with organo‐modified montmorillonites

2,7‐Bis(4‐aminophenoxy) naphthalene (BAPN), a naphthalene‐containing diamine, was synthesized and polymerized with a 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) to obtain a polyimide (PI) via thermal imidization. To enhance the thermal and mechanical properties of the polymer, PI–Montmorillonite (MMT) nanocomposites were prepared from a DMAc solution of poly(amic acid) and a DMAc dispersion of MMT, which were organo‐modified with various amounts of n‐dodecylamine (DOA) or cetylpyridium chloride (CPC). FTIR, XRD, and TEM (transmission electron microscopy) were used to verify the incorporation of the modifying agents into the clay structure and the intercalation of the organoclay into the PI matrix. Results demonstrated that the introduction of a small amount of MMT (up to 5%) led to the improvement in thermal stability and mechanical properties of PI. The decomposition temperature of 5% weight loss (T_d,5%) in N₂ was increased by 46 and 36°C in comparison with pristine PI for the organoclay content of 5% with DOA and CPC, respectively. The nanocomposites were simultaneously strengthened and toughened. The dielectric constant, CTE, and water absorption were decreased. However, at higher organoclay contents (5–10%), these properties were reduced because the organoclay was poorly dispersed and resulted in aggregate formation. The effects of different organo‐modifiers on the properties of PI–MMT nanocomposite were also studied; the results showed that DOA was comparable with CPC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Correlations between dynamic mechanical properties and nodular morphology of cured epoxy resins

Various epoxy resin formulations, based on the diglycidyl ether of bisphenol A (DGEBA) and cured with diethylene triamine (DETA) were studied. Dynamic mechanical measurements were used to characterize changes in mechanical properties as a function of temperature. The morphology of the cured resins was investigated by transmission electron microscopy. Correlations between dynamic mechanical properties and morphology were described and discussed by applying the concept of inhomogeneous (nodular) thermoset morphology. The elastic storage modulus in the glassy state was determined primarily by the internodular matrix, whereas the glass transition of cured resins depended upon the intranodular crosslink density.     

The influence of aging treatments on sulfide stress corrosion cracking of PH 13-8 Mo steel welds

Slow displacement rate tensile tests were carried out to study sulfide stress corrosion cracking (SSCC) of PH 13-8 Mo stainless steel welds in a saturated H₂S solution. The welds aged in the temperature range of 482-593 °C were susceptible to SSCC; the fracture surfaces revealed mainly quasi-cleavage fractures after notched tensile tests. However, the SSCC susceptibility in terms of the percentage loss of the notched tensile strength (NTS) of the welds was dependent on the aging treatment. The SSCC resistance and the austenite content of the welds increased with the aging temperatures. The presence of greater amounts of austenite, mainly reverted austenite, in the W1100 specimen (the weld aged at 1100 °F or 593 °C) than that in other aged specimens could account for its lower hardness and better SSCC resistance. On the other hand, the AW (as-welded) specimen containing a small amount of retained austenite films in a soft matrix exhibited a slightly improved SSCC resistance than that in the W1100 specimen. The lower hardness of the AW specimen was owing to the absence of fine coherent precipitates, leading to a reduced local stress and an enlarged plastic zone located in front of the notch in the test. With lower hardness, the local stress would also be lower and less likely to exceed some critical stress for failure in the saturated H₂S solution. For the aged specimens, the hardness/strength level and the amount of reverted austenite were the important factors that affect SSCC susceptibility.     

Hydrogen embrittlement susceptibility and permeability of two ultra-high strength steels

Slow displacement rate tensile tests were carried out in a saturated H₂S solution to investigate the effect of hydrogen embrittlement on notched tensile strength (NTS) and fracture characteristics of two ultra-high strength steels (PH 13-8 Mo stainless steel and T-200 maraging steel). Hydrogen permeation properties were determined by an electrochemical permeation method. The results of permeation tests indicated that over-aged specimens showed a lower diffusivity/hydrogen flux and higher solubility than those solution-annealed. The great increase in reverted austenite (irreversible hydrogen traps) together with numerous precipitates at the expense of dislocations (reversible) in the over-aged specimen led to such a change in permeability. Ordinary tensile tests indicated that four tested specimens had roughly the same yield strength level. Hence, the hydrogen embrittlement susceptibility of the material could be related to their permeation properties. The uniform distribution of strong hydrogen traps in over-aged specimens instead of weak traps in the solution-annealed impeded the hydrogen transport toward the strained region, thus, the resistance to sulfide stress corrosion cracking was improved in over-aged specimens.     

CHL1 encodes a component of the low-affinity nitrate uptake system in Arabidopsis and shows cell type-specific expression in roots

The Arabidopsis CHL1 (AtNRT1) gene confers sensitivity to the herbicide chlorate and encodes a nitrate-regulated nitrate transporter. However, how CHL1 participates in nitrate uptake in plants is not yet clear. In this study, we examined the in vivo function of CHL1 with in vivo uptake measurements and in situ hybridization experiments. Under most conditions tested, the amount of nitrate uptake by a chl1 deletion mutant was found to be significantly less than that of the wild type. This uptake deficiency was reversed when a CHL1 cDNA clone driven by the cauliflower mosaic virus 35S promoter was expressed in transgenic chl1 plants. Furthermore, tissue-specific expression patterns showed that near the root tip, CHL1 mRNA is found primarily in the epidermis, but further from the root tip, the mRNA is found in the cortex or endodermis. These results are consistent with the involvement of CHL1 in nitrate uptake at different stages of root cell development. A functional analysis in Xenopus oocytes indicated that CHL1 is a low-affinity nitrate transporter with a K(m) value of approximately 8.5 mM for nitrate. This finding is consistent with the chlorate resistance phenotype of chl1 mutants. However, these results do not fit the current model of a single, constitutive component for the low-affinity uptake system. To reconcile this discrepancy and the complex uptake behavior observed, we propose a "two-gene" model for the low-affinity nitrate uptake system of Arabidopsis.     

Tool support for learning Büchi automata and linear temporal logic

We introduce a graphical interactive tool, named GOAL, that can assist the user in understanding Büchi automata, linear temporal logic, and their relation. Büchi automata and linear temporal logic are closely related and have long served as fundamental building blocks of linear-time model checking. Understanding their relation is instrumental in discovering algorithmic solutions to model checking problems or simply in using those solutions, e.g., specifying a temporal property directly by an automaton rather than a temporal formula so that the property can be verified by an algorithm that operates on automata. One main function of the GOAL tool is translation of a temporal formula into an equivalent Büchi automaton that can be further manipulated visually. The user may edit the resulting automaton, attempting to optimize it, or simply run the automaton on some inputs to get a basic understanding of how it operates. GOAL includes a large number of translation algorithms, most of which support past temporal operators. With the option of viewing the intermediate steps of a translation, the user can quickly grasp how a translation algorithm works. The tool also provides various standard operations and tests on Büchi automata, in particular the equivalence test which is essential for checking if a hand-drawn automaton is correct in the sense that it is equivalent to some intended temporal formula or reference automaton. Several use cases are elaborated to show how these GOAL functions may be combined to facilitate the learning and teaching of Büchi automata and linear temporal logic. This work was partially supported by the National Science Council, Taiwan (R.O.C.) under grants NSC94-2213-E-002-089, NSC95-2221-E-002-127, NSC95-3114-P-001-001-Y02 (iCAST 2006), NSC96-3114-P-001-002-Y (iCAST 2007), and NSC97-2221-E-002-074-MY3.     

Many-impurity effects in a weakly interacting Kondo system: Comparison of theory with experiment

The theory of the many-impurity Kondo system developed in a previous paper is coupled with a statistical model, using a phenomenological relationship between the magnetic susceptibility and the effective Kondo temperature, to obtain the magnetic susceptibility of a very dilute Kondo system well below the single-impurity Kondo temperature. We find that the magnetic susceptibility can be represented as arising from a single-impurity effect proportional to the impurity concentration c, another term proportional to c ², as well as a much smaller c ³ contribution. The coefficient of the c ² term in has an approximate Curie law behavior at sufficiently low temperatures. The detailed temperature and concentration dependence of is in very good quantitative agreement with experiment, and is the first theoretical explanation of the anomalous magnetic susceptibility for Cu-Fe below T _K. The modification of the susceptibility arises in the theory from the inhibition of the spin-compensated state by the impurity-impurity interaction. The latter renormalizes the ln T term even in the region of temperature where the system is magnetically completely disordered.Part of this work was supported by USAFOR, under contract 73-2430 during a summer visit at Yeshiva University.     

The influence of porosity on the fatigue crack growth behavior of Ti–6Al–4V laser welds

The effect of porosity––a common welding defect––on the fatigue crack growth rate (FCGR) in Ti–6Al–4V laser welds was investigated. The experimental results reveal that porosity was present in partial penetration welds over a narrow fusion zone (FZ) with martensite structure. The FCGR of the FZ was lower than that of the base plate. The fracture surface morphology of weld metal was much rougher as compared to that of the base plate. Randomly oriented martensite in the FZ led to local cleavage fracture along a preferred plane, thus, altering the crack growth direction significantly out of the primary crack plane. The zigzag crack path in the FZ resulted in a reduced FCGR at a given ΔK compared to the base plate. Besides, the porous weld showed a serration on the crack growth curve, and behaved the similar crack growth characteristics as the defect free one. SEM fractography revealed that the deflection of crack path around porosity together with local notch blunting as the crack tip pierced into porosity, balanced the increased FCGR for the occurrence of instant crack advance as the crack front reached the porosity at a low stress ratio. In contrast, the serration and drop in FCGR occurred sparingly at a high stress ratio as the crack front met the porosity.