An important factor affecting synergism on coprocessing of Taiheiyo coal with Athabasca oil sand bitumen

A series of mixtures of Japanese subbituminous Taiheiyo coal and Athabasca oil sand bitumen (AOB) with various coal concentrations (0–100 wt%) was coprocessed in a 70 ml autoclave at 420°C for 1 h in the presence of H₂ (50 kg/cm² at room temperature) and sulfided Ni---Mo/Al₂O₂ catalyst. The mixture containing 2 wt% coal produced the largest amount of hexane soluble fraction (HS) and the smallest amount of benzene insoluble fraction (BI). Thus, a synergistic liquid production occurred for this mixture with 2 wt% coal by suppressing the retrogressive reactions which proceeded for pure AOB. The HS obtained from mixtures with 2–30 wt% showed higher H/C ratios and lower heteroatom contents than those obtained from pure AOB and the mixtures with more than 30 wt% coal. The amounts of transferable hydrogen contained in the mixtures were estimated using anthracene as a hydrogen acceptor. The mixtures with 2–10 wt% coal contained higher amounts of donor hydrogen than pure AOB. The HS yield from the various mixtures was correlated with the amount of donor hydrogens contained in the mixtures, except for the mixture with 10 wt% coal. Thus, the important factor which results in synergism is suggested to be the amount of donor hydrogens contained in the feed mixtures.     

An image processing system using Image Signal Multiprocessors (ISMPs)

This paper describes an image processing system using Image Signal Multiprocessors (ISMPs) adapted to gray-level image preprocessing for image analysis and image enhancement. It is composed of four ISMPs, five 1H-delay-lines, two 512×512×8-bit frame memories, a video timing controller (VTC), two 256-word ×8-bit ×8-table Look Up Tables (LUTs) and 80 nsec/sampling A/D and D/A converters. This multiprocessor system performs convolution operations such as spatial filters, contrast enhancement, and binarization for gray-level images, thinning, thickening, pattern matching etc. for binary images, and image quality improvement for moving images such as T.V. images. Otherwise, it performs feature extraction operations such as area calculations, fillet coordination, and moment calculations for objective image data. Moreover, this system is capable of applying color image processing by using a multiboard system.     

Comparison of coal hydroliquefaction catalysed by ZnCl2-MCln (CuCl,CrCl3 and MoCl5) and ZnCl2 melts

Hydrogenation of four bituminous coals impregnated with 5 wt% of either mixtures of ZnCl₂-MCl_n (CuCl, CrCl₃ and MoCl₅) systems or ZnCl₂ was carried out using a batch autoclave system at 400° for 3 h at 9.8 MPa of initial hydrogen pressure. The ZnCl₂-MoCl₅ system showed the highest yield of the hexane-soluble (HS) fraction compared with the other systems irrespective of the coal used. The difference between the yields of HS fractions using the ZnCl₂-MoCl₅ and other systems was most marked for coals of fairly low volatile matter content, though the conversion was relatively low (47–66%), whilst for coals of high volatile matter content HS yields with the binary melt systems were high (86–91% conversion). Elemental analyses of the HS fractions indicated that the ZnCl₂-MoCl₅ system is most favourable in decreasing the average molecular weight and the heteroatom content of HS, this characteristic trend being confirmed also with five HS fractions separated by Chromatographic techniques. Both elemental analyses and molecular weights of asphaltene (benzene-soluble materials, BS) indicated that the ZnCl₂-MoCl₅ system is also most effective in cracking coal structure.     

Structural study of hexane-soluble products from hydroliquefaction of three Yallourn brown coal lithotypes over molten salt catalysts

The hexane-soluble fractions of hydroliquefied products from three Yallourn brown coal lithotypes have been separated into five fractions by combined silica-alumina packed column chromatography. Analyses of various fractions by g.c.-m.s. permitted the identification of ≈50 components in the saturate fraction and 40 components in the diaromatic fraction, together with 30 components in the monoaromatics. The components identified were quite similar among hexane-soluble portions of all three lithotypes. A marked predominance of even carbon number alkane (C₂₃-C₂₉) was observed in the hydrocarbon fractions from pale lithotype over $\text{ZnCl}{}_2\text{KCl}$, and medium light lithotype over both pure ZnCl₂ and $\text{ZnCl}{}_2\text{KCl}$. However, medium dark lithotype over both melt catalysts produced a saturate fraction with an odd carbon number(C₂₂-C₂₈) preference. Based on spectral methods, Soxhlet extracts obtained from untreated lithotypes (hexane and benzene solubles) were characterized as complex mixtures of higher molecular weight(300–1000) aliphatic hydrocarbons, which were supposed to be a precursor of the saturates produced from the corresponding lithotype in the catalytic hydroliquefaction.     

Studies on ion-exchange membranes. XXXII. Heterogeneity in ion-exchange membranes

Twelve kinds of cation-exchange membranes were treated with hydrogen peroxide. Some of them (Selemion CMV, Nepton CR-61, Scrion C-100, SAM-1) were completely destroyed. Heterogeneity is believed to be present in that part of their chemical structures that is decomposable by the treatment. The other membranes were converted into porous membranes by the decomposition of the resinous part. Water permeabilities and electric resistances of the porous membranes were examined to evaluate the pore radius. It was concluded that the “paste method” membranes have a heterogeneity or localized distribution of the resinous part under 50 mμ. The “paste method” membranes seemed to resemble the “graft method” membranes in chemical structure and to be much different from the mosaic-type membranes such as Permaplex and MC-3142. These results were also supported by extraction of the membranes with appropriate solvents and observation by electron microscopy.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Two-terminal ultrahigh frequency carrier type thin-film magnetic sensor using impedance matching lines

This article reports on output and band characteristics of the two-terminal ultrahigh frequency (UHF) carrier type magnetic field sensor, which is based on impedance change due to magnetic field dependent permeability, and a magnetic field is detected as an amplitude modulation of a UHF carrier voltage. Two types of transmission line configurations (type-A and type-B) are proposed to make a two-terminal sensor rather than the four terminals of the conventional sensor operating on this principle, because the two-terminal sensor is more advantageous in terms of designing and fabricating of the sensor element and the transmission lines than the four-terminal sensor. In the type-A, a half-wave impedance matching line is added between the element and the carrier power supplying points. Also, in the type-B, a carrier power is supplied on the quarter-wave matching line located between the element and the load. The type-A sensor exhibits a lower output and a much narrower 3 dB-bandwidth of a few tens of MHz than the four-terminal sensor. In contrast, a higher output than that in the four-terminal sensor and a 3 dB-bandwidth of ～100 MHz are confirmed in the type-B sensor by experiments and calculations.     

Phase transformation and interface segregation behavior in Si3N4 ceramics sintered with La2O3–Lu2O3 mixed additive

Microstructure and mechanical property of silicon nitride (Si₃N₄) ceramic are strongly dependent on the selection of sintering additives. When rare‐earth (RE) oxide is used as the sintering additive, segregation of RE ions at interface between Si₃N₄ grain and intergranular glassy film (IGF) is believed to play a critical role. Although the ionic radius of RE ion is known to be an empirical parameter to modify the mechanical property, the correlation between the segregated ions and their ionic radii is still under controversy. In order to address this issue, (i) rate of α‐β phase transformation and (ii) segregation behavior at the interface were studied for Si₃N₄ ceramics sintered using mixture of La₂O₃ and Lu₂O₃ as additives in this study. Specimens of Lu content 30% and higher exhibited lower activation energies for the α‐β phase transformation as compared with those of Lu content 20% and lower. In terms of the segregation behavior, La was preferably segregated at one site and Lu at the other site along β‐Si₃N₄/IGF interface in the specimens of Lu content 30% and higher. It is understood from these results that Lu segregation site should be more closely related with grain growth.     

Stable and super‐low friction of amorphous carbon nitride coatings in nitrogen gas by using two‐step ball‐on‐disk friction test

Effect of running‐in process on friction behaviour of carbon nitride (CNx) coating in N₂ gas stream was investigated with a newly introduced two‐step ball‐on‐disk friction test, where the rubbed Si₃N₄ ball in the pre‐sliding (step 1) was replaced by a new CNx‐coated Si₃N₄ ball in the subsequent sliding stage under N₂ gas (step 2). The two‐step friction test is clarified to be a simple but effective technique for obtaining contact material combination of self‐mated CNx coatings and for achieving stable and low frictions of CNx coatings. Friction coefficients of CNx/CNx in N₂ gas stream decrease greatly from 0.07 without pre‐sliding to less than 0.025 in two‐step friction tests. The minimum friction coefficient of 0.004 was obtained by introducing 500 cycles of pre‐sliding in ambient air. These stable and low frictions are attributed to the generation of self‐mated CNx coatings and the formation of a lubricious layer on the disk surface. Copyright © 2014 John Wiley & Sons, Ltd.