Heat Gelling Properties of Hen's Egg Yolk Low Density Lipoprotein (LDL) in the Presence of Other Protein

Ovalbumin (OV), bovine serum albumin (BSA) and lysozyme (Lys) were added to egg yolk low density lipoprotein (LDL) and the heat-induced gel formation of LDL-protein mixture was studied. The gel formation of LDL-protein mixture was different between the acidic and alkaline pH region; fine stable gels were formed in the alkaline pH region, but weak paste-like gels were formed in the acidic pH region. The effect of added BSA or OV on the gel strength of LDL was much larger than that of Lys. Scanning electron micrographic observation showed that the microstructures of both LDL-BSA and LDL-OV gels were more uniform than that of LDL-Lys gel.     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.     

The distribution of soap in the polymerization system for preparation of carboxylated polystyrene latexes

The distribution of soap in the polymerization system for preparation of carboxylated polystyrene latexes has been investigated. The critical micelle concentration (CMC) for sodium dodecyl sulfate (SDS) in the polymerization system was determined by surface tension measurement to be 0.173 mmole/l. The solubility of styrene (St) in the aqueous phase of the polymerization system was determined by NMR measurement to be 4.52 mmole/l. It was confirmed by NMR measurement that at the concentration of SDS higher than the CMC, St is solubilized in the interior of the SDS micelles, and the concentration of solubilized St is almost proportional to the concentration of micellar SDS. From this relationship, the number and radius of SDS micelles containing solubilized St can be determined.     

Thermal shock resistance of flat plastic integrated circuit packages

Flat packages (FPs) were formed from epoxy molding compounds with various physical properties using a transfer molding machine. The compounds were prepared by changing kinds and amounts of additives and addition methods. The thermal shock test was carried out by the following procedures. The plastic package was soaked alternately in liquid nitrogen (?196°) and in liquid solder (200°) in the cycle of 140s. The median life to crack initiation was defined to be the cycles when half of the specimens exhibited crack initiation. According to linear fracture mechanics, the following expression was obtained relating the median life N, thermal stress σ_t, and strength σ_b; N = C/σ·(σ_b/σ_t)^m. We found the linear relation between logarithm of Nσ and logarithm of σ_b/σ_t for various packages, and estimated the values of C and m as 5 × 10⁴ MPa² and 5.5, respectively. The value of m was the same as that obtained for a dual-in-line package.     

Separation of Polyvinyl Chloride from Plastic Mixture by Froth Flotation after Surface Modification with Ozone

Selective modification by ozonation for the surface of polyvinyl chloride (PVC) was evaluated to separate PVC from the other plastics, polyethylene terephthalate (PET), polycarbonate (PC) and polymethyl methacrylate (PMMA), with almost the same density as PVC by the froth flotation process. Ozonation could selectively decrease the contact angles of flexible PVC from 87.5 degrees to 68.4 degrees and rigid PVC from 90.3 degrees to 66.9 degrees, whereas little decreases in the contact angle were observed for other plastics. This would be due to the replacement of the chloride group on the surface of PVC, into hydrophilic functional groups; carbonyl, carboxyl and ester group. The PVC was successfully separated from the other plastics by the froth flotation process after the selective surface modification by ozonation.     

A full‐color eyewear display using planar waveguides with reflection volume holograms

Abstract— A full‐color eyewear display with over 85% see‐through transmittance with a 16° horizontal field of view was developed. Very low color crosstalk, less than 0.008 Δu′v′ uniformity, and 120% NTSC color gamut were achieved. Waveguides with two in‐ and out‐coupling reflection volume hologram elements enabled a simple configuration that has an optical engine beside the user's temples. The reflection volume hologram elements used on the waveguides realized a small thickness of 1.4 mm for each waveguide, and an out‐coupling reflection volume hologram used as an optical combiner contributed a high see‐through transmittance of 85% due to its wavelength selectivity. However, there are technical challenges in achieving a reasonable screen size and quality color images with optics that utilize holographic waveguides because holograms have large chromatic dispersions compared to conventional optical elements such as lenses and mirrors. Approaches to overcome these issues are described.     

Dependence of Vacuum Electrical Breakdown Field and Field Enhancement Factor on the Number of Apertures Drilled in Small Electrodes

Dark current based on field emission current is considered to be a factor causing the vacuum electrical breakdown between multiaperture acceleration grids in the JT‐60 negative ion source. In this paper, we focus on field enhancement factor, which is a key parameter of field emission from the electrode. Vacuum breakdown testing for small‐sized electrodes simulating the multiaperture acceleration grids of the negative ion source was performed. We found the field enhancement factor and breakdown field for multiaperture electrodes, and we investigated the dependence of each parameter on the number of apertures. The results revealed that an increase in the average field enhancement factor after the end of conditioning resulting from an increase in the number of apertures led to a decrease in the dielectric strength of the multiaperture electrodes.     

Short‐Term Wind Power Prediction for Wind Turbine via Kalman Filter Based on JIT Modeling

This paper addresses wind power prediction, which is known to be a key technology in energy management systems. In this paper, a 24‐h‐ahead power prediction method using a filter theory is proposed for wind power generation. The prediction method is a simple algorithm. The procedure of prediction consists of two steps: the data processing and the calculation of the predicted values. In data processing, in order to obtain the correlative data from the database, we employ just‐in‐time modeling. In the calculation of the predicted values, we propose a regression model for wind speed and wind power, and the unknown parameters are estimated using a constrained Kalman filter. Moreover, in the procedure used to estimate the unknown parameters, reduction and convergence of the variables are also guaranteed. Finally, the advantages of the proposed method over the conventional method are shown through actual prediction evaluations.     

Diagnosis Criterion of Abnormality of Transformer Winding by Frequency Response Analysis (FRA)

Frequency response analysis (FRA) is a powerful technique to detect internal abnormalities within power transformers. However, diagnosis criteria of power transformers by FRA have not been fully established yet. In this paper, a new evaluation method of degree of identification between two transfer functions is proposed. In the proposed method, a frequency window is employed and cross‐correlation factor is calculated with moving the window. Furthermore, the proposed method is applied to transfer functions of real transformers with or without some abnormalities. Based on this discussion, objective criteria for diagnosis of abnormalities of transformer windings by FRA are proposed. The proposed criteria are based on a few data of transformers with some abnormalities. Therefore, the proposed criteria are tentative and they would be improved by accumulation of further data.     

Application results of a prototype ultrasonic liquid film sensor to a 7 MPa steam–water two-phase flow experiment

A prototype ultrasonic liquid film sensor was applied to a high-temperature steam–water two-phase flow experiment. The liquid film sensor was vertically installed in a loop which was connected to HUSTLE, a multi-purpose steam source test facility. The hydraulic diameter of the measurement section was 9.4 mm. The output waveforms of the sensor were acquired with a digital oscilloscope. The fluid temperature and system pressure were kept at 288 °C and 7.2 MPa, respectively, during the experiment. The pulse-echo method was used to calculate the liquid film thickness. The cross-correlation calculation was utilized to determine the time difference between the pulse reflected at the sensor surface and the pulse reflected at the liquid film surface. The time-averaged liquid film thicknesses were less than 0.055 mm in the annular flow condition. The increase of the time-averaged thickness was small with the change of the gas momentum flux. The film thicknesses measured with the sensor were compared with the past experimental results; the former were smaller than one-fourth of the thickness estimated as the mean film thickness. The comparison results suggested that the continuous liquid sublayer thickness was measured with the liquid film sensor.