Cloning SIM Cards Usability Reduction in Mobile Networks

This paper studies the probability of using cloning subscriber identity module (SIM) cards in Universal Mobile Telecommunications Systems. It also explores how the mobile system can discover the cloning SIM cards as soon as possible and how to reduce the probability of using cloning SIM cards in mobile networks. The illegal mobile station attached to mobile networks can be detected by a Normal Location Area Update, a periodic area location update, and by outgoing calls that are issued from genuine mobiles. An analytical model is developed to investigate the effects of a location area update and outgoing calls issued by genuine mobiles on the use of illegal mobiles. Mobility management, such as registration, cancellation, and outgoing and incoming procedures for legal and illegal users are investigated and analysed. An analytical model to investigate the effect of outgoing call arrival rates, and location area residence time on the detected illegal user has been presented. This paper seeks to increase the security of communication by avoiding fraud of cloned mobile phones by proposing a solution to speed up the detection of cloning SIM cards.     

EEG‐based brain source localization using visual stimuli

Electroencephalography (EEG) is widely used in variety of research and clinical applications which includes the localization of active brain sources. Brain source localization provides useful information to understand the brain's behavior and cognitive analysis. Various source localization algorithms have been developed to determine the exact locations of the active brain sources due to which electromagnetic activity is generated in brain. These algorithms are based on digital filtering, 3D imaging, array signal processing and Bayesian approaches. According to the spatial resolution provided, the algorithms are categorized as either low resolution methods or high resolution methods. In this research study, EEG data is collected by providing visual stimulus to healthy subjects. FDM is used for head modelling to solve forward problem. The low‐resolution brain electromagnetic tomography (LORETA) and standardized LORETA (sLORETA) have been used as inverse modelling methods to localize the active regions in the brain during the stimulus provided. The results are produced in the form of MRI images. The tables are also provided to describe the intensity levels for estimated current level for the inverse methods used. The higher current value or intensity level shows the higher electromagnetic activity for a particular source at certain time instant. Thus, the results obtained demonstrate that standardized method which is based on second order Laplacian (sLORETA) in conjunction with finite difference method (FDM) as head modelling technique outperforms other methods in terms of source estimation as it has higher current level and thus, current density (J) for an area as compared to others.     

Congestion prevention in broadband wireless access systems: An economic approach

While the demand for mobile broadband wireless services continues to increase, radio resources remain scarce. Even with the substantial increase in the supported bandwidth in the next generation broadband wireless access systems (BWASs), it is expected that these systems will severely suffer from congestion, due to the rapid increase in demand of bandwidth-intensive multimedia services. Without efficient bandwidth management and congestion control schemes, network operators may not be able to meet the increasing demand of users for multimedia services, and hence they may suffer an immense revenue loss. In this paper, we propose an admission-level bandwidth management scheme consisting of call admission control (CAC) and dynamic pricing. The main aim of our proposed scheme is to provide monetary incentives to users to use the wireless resources efficiently and rationally, hence, allowing efficient bandwidth management at the admission level. By dynamically determining the prices of units of bandwidth, the proposed scheme can guarantee that the number of connection requests to the system are less than or equal to certain optimal values computed dynamically, hence, ensuring a congestion-free system. The proposed scheme is general and can accommodate different objective functions for the admission control as well as different pricing functions. Comprehensive simulation results with accurate and inaccurate demand modeling are provided to show the effectiveness and strengths of our proposed approach.     

CdS-sensitized TiO2 in phenazopyridine photo-degradation: Catalyst efficiency,stability and feasibility assessment

Mineralization of phenazopyridine, 1, in water, under solar-simulator radiation was efficiently achieved using nanoparticle CdS-sensitized rutile TiO₂, TiO₂/CdS, 2, as photo-catalysts. Despite that, 2 showed two main drawbacks. Firstly, the system was difficult to recover by simple filtration, and demanded centrifugation. Secondly, the sensitizer CdS showed relatively high tendency to leach out hazardous Cd²⁺ ions under photo-degradation reaction conditions. In an attempt to solve out such difficulties, 2 was supported onto sand surface. The sand/TiO₂/CdS system, 3, was easier to recover but showed slightly lower catalytic activity compared to 2. On the other hand, the support failed to prevent leaching of Cd²⁺. This indicates limited future applicability of CdS-sensitized TiO₂ photo-catalyst systems, in solar-based water purification strategies, unless leaching out tendency is completely prevented.     

Effect of anti-scale agents on the solubility of CO2 in seawater at temperatures of 60 to 90ºC and pressures of 1–2 bar

The objective of this work is to present experimental data that would show the effect of temperature, salinity, pressure and the presence of anti-scale additives on CO₂ solubility in seawater. The paper examines the solubility of CO₂ in real seawater and real seawater dosed with two different anti-scale additives. The study has been performed at temperatures between 60ºC and 90ºC and at pressures of 1 and 2 bar. To assess the effect of each anti-scale additive on CO₂ gas solubility varying doses, 2–10 ppm of anti-scale additive have been used. For the purpose of the experimentation an experimental rig has been designed to ensure adequate contact between the gas phase and the aqueous phase. The continuous quantitative analysis of CO₂ concentration flowing from the experimental rig was measured using a CM-5011 Carbon Coulometer. A mass balance was carried out to calculate the amount of CO₂ absorbed into solution; Henry’s law constant was then calculated.     

Experimental study on the compressive resistance of stress-relieved solid round steel members

The Canadian Standard for Antenna Towers and Antenna Supporting Structures, CSA-S37-01, specifies expressions for the compressive resistance of solid rounds based on the Structural Stability Research Council (SSRC) Column Curves for non-solid-round members and the results from experimental investigations on the compressive resistance of solid rounds carried out back to 1965. Similar Standard in USA (TIA/EIA-222-G.0) specifies design criteria for such members as derived from the superseded AISC-LRFD-94 Standard, which is independent of the shape of the member cross-section. The European Standard, Eurocode 3, provides column curves for the compressive resistance of various structural steel members, and assumes the applicability of one of them to solid rounds. As such, it is necessary to conduct an experimental study on solid round stress-relieved steel members to refine the available design equations for such members. This paper provides a summary of the literature review on solid rounds as well as a recent test program conducted on stress-relieved steel solid rounds. Correlation between the results from these tests and the current practice for the design of solid rounds is investigated. The paper concludes with a proposed compressive resistance equation for economical design of such members.     

Sentinel 2 analysis of turbidity retrieval models in inland water bodies: The case study of Jordanian dams

This study investigates the potential of using Sentinel 2 multispectral satellite images to develop turbidity retrieval models and further estimate the turbidity values of inland water bodies in Jordan. Traditionally, laboratory analysis has been used to assess surface water quality, which is expensive, time-consuming, and requires accessing the field physically. In contrast, remote sensing technologies can detect the water contaminant level at a consistent spatial and temporal coverage. Turbidity is an essential indicator of inland water quality as it directly reflects under-water light penetration. This study was held in three Jordanian dams, King Talal Dam, Mujib Dam, and Wadi Al Arab Dam, which vary in their water quality level. Twenty water samples were collected from each dam. Forty samples were used to calibrate the models, and the rest samples were used to validate the predictive models. The results show that Sentinel 2 near-infrared band to green band (B8/B3) achieved high fitting accuracies with R² = 0.832 and root mean square error (RMSE) = 1.123 NTU. Overall, this study has demonstrated the ability of Sentinel 2 data to estimate the turbidity in different ranges of inland water bodies’ quality and indicates that remote sensing can be used as an efficient tool for monitoring inland water quality. This study presents empirical data that could act as a platform to extend future work to cover more sites and contexts.     

Liquid flow in polyurethane foams for filtration applications: a study on their characterization and permeability estimation

Journal of Porous Materials - Open-cell polyurethane foams have been investigated for various filtration applications to treat industrial byproducts and waste water. Flow-related morphological...     

Effect of Location of Restraint on Fire Response of Steel Beams

Restrained steel beams, when exposed to fire, develop significant restraint forces and often behave as beam-columns. The response of such restrained steel beams under fire depends on many factors including: fire scenario, beam slenderness ratio, location of axial restraint at the supports, and high-temperature properties of steel. A set of numerical studies, using finite element computer program ANSYS, is carried out to study the fire response of steel beam-columns under realistic fire and restraint scenarios. Results from the parametric studies indicate that fire scenario, beam slenderness, location of axial restraint and high-temperature creep have significant influence on the behavior of restrained beams under fire conditions. Severe fires produce high axial forces at early stages of fire exposure; whereas in moderate fires, significant axial force develops only at later stages of fire exposure. Axial restraint enhances the fire resistance due to the development of tensile catenary action in restrained beams. Furthermore, restrained beams with low slenderness ratio exhibit better fire performance when the axial restraint at the support is located at the bottom flange.     

Response of steel beam–columns exposed to fire

Steel beams when exposed to fire develop significant restraint forces and often behave as beam–columns. The response of such restrained steel beams under fire depends on many factors including fire scenario, load level, degree of restraint at the supports, and high-temperature properties of steel. A set of numerical studies, using finite element computer program ANSYS, is carried out to study the fire response of steel beam–columns under realistic fire, load and restraint scenarios. The finite element model is validated against experimental data, and the importance of high-temperature creep on the fire response of steel beam–columns is illustrated. The validated model is used to carry out a set of parametric studies. Results from the parametric studies indicate that fire scenario, load level, degree of end-restraint and high-temperature creep have significant influence on the behavior of beams under fire conditions. The type of fire scenario plays a critical role in determining the fire response of the laterally-unrestrained steel beam within a space subframe. Increased load level leads to higher catenary forces resulting in lower fire resistance. Rotational restraint enhances the fire resistance of a laterally-unrestrained steel beam, while the axial restraint has detrimental effect on fire resistance.