Fungizide und bakterizide Anstrichmittel — neue Wirkstoffe für Öl- und Kunstharz-Lacke

Fungicidal and Bactericidal Paints — New Additives for the Oil and Synthetic Resin Lacquers New fungicides, which replace completely the mercury additives in oil, alkyd and synthetic resin lacquers, were developed. In contrast to the mercury additives, they can also be used in the stoving lacquers. They are only of limited use in insulating varnishes. The experience with these additives in different lacquer systems is reported. A combined testing method can give a practicable judgement about the fungicidal activity of such paints in a short time.     

Optimality criteria for the components of anisotropic constitutive matrix

In a free material formulation, the problem of minimizing a weighted sum of compliance’s from multiple load cases, subject to an active constraint on material volume, is solved in a formulation with two optimality criteria. The first optimality criterion for the distribution of material volume densities is equal value for the weighted elastic energy densities, as a natural extension of the optimality criterion for a single load case. The second optimality criterion for the components of a constitutive matrix (of unit norm) is proportionality to corresponding weighted strain components with the same proportionality factor \(\widehat \lambda \) for all the components, as shortly specified by \(C_{i j k l} = \widehat \lambda \sum _{n} \eta _{n} (\epsilon _{i j})_{n} (\epsilon _{k l})_{n}\) , in traditional notation (n indicate load case). These simple analytical results should be communicated, in spite of the practical objection against design for weighted sum of compliance’s, as compared to worst case design and design considering strength. The application of the approach of the two optimality criteria is illustrated by a 2D example with 8 load cases. Stable and fast convergence is shown.     

Determination of local hydrodynamic parameters in bubble columns by the electrodiffusion method with oxygen as depolarizer

An electrodiffusional three-segment probe was developed with which local axial and radial liquid velocities can be determined. Application of this probe in gas-liquid flow yields information on local gas hold-up. In coalescing media the commonly used redox-system Fe(CN) ₆ ³⁻ /Fe(CN) ₆ ⁴ should be replaced by dissolved oxygen as depolarizer. Measurements of local axial and radial liquid velocity and turbulence intensity in different bubble columns (D = 150 and 600 mm) showed good agreement with data obtained by hotfilm anemometry. This paper was presented at the International Workshop on Electrodiffusion Diagnostics of Flows held in Dourdan, France, May 1993.     

Preparation and characterisation of α-methylstyrene–butadiene latexes for paper coating applications

The purpose of this work is to demonstrate how α-methylstyrene (AMS) can replace styrene in preparing styrene–butadiene (SB) type latexes and to compare the properties of the paper coating of the prepared α-methylstyrene–butadiene emulsion with the commercial styrene–butadiene latex reference sample. A lot of work is nowadays being conducted on different biorefinery concepts replacing fossil oil with biomass based raw materials due to the expected rise of the fossil oil cost. Aromatics can in principle be produced from renewable raw materials, such as lignin, sugars and terpenes for example. The potential methods include thermochemical conversions, catalytic fast pyrolysis, metabolic engineering, catalytic aromatisation and dehydrogenation among others. Terpenes, such as α-limonene and pinene, are possible sources of aromatics, and they can indeed be catalytically converted to p-cymene. Industrial hydrodealkylation and disproportionation processes developed by major petrochemical companies can further convert p-cymene to BTX aromatics or simultaneously dehydrogenate the alkyl chain of p-cymene to styrenic monomers such as α-methylstyrene. Based on the measured paper properties for uncalendered and calendered coated samples, AMS proved to be adequate to replace the oil based styrene in commercial reference SB latexes. Even though the emulsion polymerisation for the α-methylstyrene–butadiene latex was not optimised, almost all tested properties were at least equally good as in the commercial reference sample. α-Methylstyrene containing coating colours had slightly higher viscosity than the other coating colours. Coating colours containing α-methylstyrene seems to have an improved water retention compared to the commercial reference styrene–butadiene latex coating colour and the laboratory prepared styrene–butadiene coating colour. The paper coated with the commercial reference latex containing coating colour was less porous than the other coated papers. Despite of that, both dry and wet surface strength were at least equally good as in the case of the commercial reference latex. The results are promising when thinking of the future development of the bio-based latexes.     

Physical solvent extraction of levulinic acid from dilute aqueous solution with 2-methyltetrahydrofuran

The results of the present investigation reveal that 2-methyltetrahydrofuran is a potential solvent for the extraction of levulinic acid from dilute aqueous solution. This conclusion is based on the relatively high values of distribution coefficient K_d (1.3-1.6) measured for the system of levulinic acid – water – 2-methyltetrahydrofuran at temperatures 298.2 K, 313.2 K, and 328.2 K, as well as encouraging performance of the continuous counter current Kühni column. The results give reason to believe, that 2-methyltetrahydrofuran can be considered for the extraction of other low molecular weight acids, such as formic or lactic acid, as well.     

Decision rules for determining terrestrial movement and the consequences for filtering high-resolution global positioning system tracks: a case study using the African lion (Panthera leo)

The combined use of global positioning system (GPS) technology and motion sensors within the discipline of movement ecology has increased over recent years. This is particularly the case for instrumented wildlife, with many studies now opting to record parameters at high (infra-second) sampling frequencies. However, the detail with which GPS loggers can elucidate fine-scale movement depends on the precision and accuracy of fixes, with accuracy being affected by signal reception. We hypothesized that animal behaviour was the main factor affecting fix inaccuracy, with inherent GPS positional noise (jitter) being most apparent during GPS fixes for non-moving locations, thereby producing disproportionate error during rest periods. A movement-verified filtering (MVF) protocol was constructed to compare GPS-derived speed data with dynamic body acceleration, to provide a computationally quick method for identifying genuine travelling movement. This method was tested on 11 free-ranging lions (Panthera leo) fitted with collar-mounted GPS units and tri-axial motion sensors recording at 1 and 40 Hz, respectively. The findings support the hypothesis and show that distance moved estimates were, on average, overestimated by greater than 80% prior to GPS screening. We present the conceptual and mathematical protocols for screening fix inaccuracy within high-resolution GPS datasets and demonstrate the importance that MVF has for avoiding inaccurate and biased estimates of movement.