Microscopical imaging of hydroxyapatite/mica composite and packed hydroxyapatite structure--an atomic force microscopy investigation

A focus on the importance of leisure in the development of student nurses has been neglected in the 1990s. This study considers 444 prospective nurses on conventional, diploma and degree courses in two areas of England. It examines their activities associated with socializing, their social support networks and their use of clubs, sports and hobbies before entering nursing. It is evident that students enter nurse training with a wide variety of leisure experiences. Changing recruitment patterns and the structure of nurse training has an effect on the leisure needs of prospective nurses which must be addressed.     

Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

NEW APPROACH FOR ESTIMATION OF ΔJ AND FOR MEASUREMENT OF CRACK GROWTH AT ELEVATED TEMPERATURE

Abstract— The ACPD-method was used to measure crack growth in low cycle fatigue tests at elevated temperature. The material which was investigated at T = 550°C was the ferritic steel 2.25Cr–1Mo. Characteristic values of representative hysteresis loops were determined. The crack growth data were correlated with the effective part of the fracture mechanics parameter Δ J. A new method for the calculation of Δ J is proposed.     

Characterization of Silicon Carbide–Silicon Nitride Composite Ultrafine Particles Synthesized Using a CO2 Laser by Silicon-29 Magic Angle Spinning NMR and ESR

The structure of silicon carbide–silicon nitride (SiC–Si₃N₄) composite particles synthesized using a CO₂ laser was studied by magic angle spinning nuclear magnetic resonance (MAS-NMR) and electron spin resonance (ESR). The structure around Si atoms changed by introducing N. C atoms around Si were substituted by N atoms, and N-rich configurations around Si atoms increased stepwise as the N content increased. The low N content composite particles consisted of mainly SiC phase containing dissolved N. N atoms were partly present in β-SiC microcrystal and partly in the grain boundary layer in the particle. N atoms were tetrahedrally surrounded by four Si atoms in β-SiC microcrystal and were trivalent state bonded to three Si atoms in the grain boundary layer. The high N content particles consisted of SiC, Si₃N₄, and amorphous phases, whose amount depended on N content.     

Photoelectrochemical energy conversion system modeled on the photosynthetic process

Photo-excitable electrodes were prepared by incorporating magnesium chlorophyll (MgChl) or manganese chlorophyll (MnChl) into the thin layer of such liquid cyrstals as N-(p-methoxybenzylidene)-p-butylaniline (MBBA) and 4′-heptyl-4-cyanobiphenyl (HCB), being attached to the platinum surface. The MgChl—MBBA electrode gave the positive photo-induced potential shift in an acidic solution. In sharp contrast, the negative photo-induced potential shift was developed by the MnChl—HCB electrode in an alkaline solution. The involvement of a liquid crystal prominently enhanced the photo-response of the immobilized chlorophylls. The photoelectrochemical energy conversion system modeled on the photosynthetic process was assembled by employing the MgChl—MBBA and the MnChl—HCB electrodes as a cathode and an anode, respectively. The photocurrent derived from the system was concluded to result from the decomposition of water, since an evidence for the molecular oxygen evolution at the MnChl—HCB electrode was obtained. Furthermore, the incorporation of β-carotene was found to markedly enhance the stability of the MnChl—HCB electrode.     

Decomposition of chlorofluorocarbons on TiO2ZrO2

The decomposition of chlorofluorocarbons (CFCs) in the presence of water was examined over a variety of solid acid catalysts. The TiO₂ZrO₂ catalyst was found to have the highest activity and longest life among the catalysts examined. The activity of the TiO₂ZrO₂ catalysts depended upon the content of TiO₂. At the contents of TiO₂ from 58 to 90 mole%, the TiO₂ZrO₂ catalysts exhibited high activity, and these catalysts were proven to contain TiZrO₄ crystal. From the study of the XRD peak intensity of the TiZrO₄ crystal, it was highest on the TZ-58 which contained 58 mole% of TiO₂, and decreased with increasing the content of TiO₂. Furthermore, the conversion of CFC113 measured at 673 K was highest at TZ-58, and decreased gradually with increasing TiO₂ content. Therefore, the TiZrO₄ crystal influences the activity of decomposition of CFC113. However, the TiO₂ZrO₂ catalyst was gradually deactivated during the reaction due to the elimination of titanium atoms. A good relationship was found between the activity on TiO₂ZrO₂ catalyst and bond energy of CCl in the compounds of chlorofluorocarbons and hydrochlorocarbons, suggesting that the rate controlling step was the cleavage of CCl bond.     

Potential bile acid metabolites. 24. An efficient synthesis of carboxyl-linked glucosides and their chemical properties

A facile and efficient synthesis of the carboxyl-linked glucosides of bile acids is described. Direct esterification of unprotected bile acids with 2,3,4,6-tetra-O-benzyl-d-glucopyranose in pyridine in the presence of 2-chloro-1,3,5-trinitrobenzene as a coupling agent afforded a mixture of the α- and β-anomers (ca. 1∶3) of the 1-O-acyl-d-glucoside benzyl ethers of bile acids, which was separated effectively on a C₁₈ reversedphase chromatography column (isolated yields of α- and β-anomers are 4–9% and 12–19%, respectively). Subsequent hydrogenolysis of the α- and β-acyl glucoside benzyl ethers on a 10% Pd−C catalyst in acetic acid/methanol/EtOAc (1∶2∶2, by vol) at 35°C under atmospheric pressure gave the corresponding free esters in good yields (79–89%). Chemical specificities such as facile hydrolysis and transesterification of the acyl glucosides in various solvents were also discussed.     

Immobilization of multicopper oxidase from Pyrobaculum aerophilum onto an electrospun-aligned single-walled carbon nanotube surface via a carbon-nanotube-binding peptide for biocathode

Biofuel cells (BFCs) that produce electrical energy from organic resources through enzymatic reactions have been attracting significant attention. Owing to the high electrical conductivity of carbon nanotubes (CNTs), their modification on the electrode surface of a BFC is expected to increase the current, and their high specific surface area may be useful in increasing the power output. Previously, we constructed a biocathode by immobilizing multicopper oxidase from Pyrobaculum aerophilum (McoP) with a carbon nanotube binding peptide (CBP) sequence on the CNTs. This resulted in higher current densities than when using enzymes without CBP sequences. However, owing to the randomly stacked CNTs on the surface of the electrodes, their conductive properties were impaired and performance as biocathodes was poor. Herein, we constructed a biocathode in which single-walled CNTs (SWCNTs) were oriented one-dimensionally and McoP is immobilized on the surface of an SWNCT via CBP. The current density was successfully increased by two-fold by orienting the CNTs and orienting and immobilizing McoP on their surfaces. This technology provides insights into the development of biodevices with controlled orientation of both the SWCNTs and enzymes immobilized on their surfaces.