Fracture mechanics‐based progressive damage modelling of adhesively bonded fibre‐reinforced polymer joints

A quasi‐static progressive damage model for prediction of the fracture behaviour and strength of adhesively bonded fibre‐reinforced polymer joints is introduced in this paper. The model is based on the development of a mixed‐mode failure criterion as a function of a master R‐curve derived from the experimental results obtained from standard fracture mechanics joints. Consequently, the developed failure criterion is crack‐length and mode‐mixity dependent, and it takes into account the contribution of the fibre‐bridging effect. Energy release rate values for adhesively bonded double‐lap joints are obtained by using the virtual crack closure technique method in a finite element model, and the numerically obtained strain energy release rate is compared to the critical strain energy release rate given by the mixed‐mode failure criterion. The entire procedure is implemented in a numerical algorithm, which was successfully used for predicting the strength and R‐curve response of adhesively bonded double‐lap structural joints made of pultruded glass fibre‐reinforced polymers and epoxy adhesives.     

Significant improvement of semi-solid microstructure and mechanical properties of A356 alloy by ARB process

Accumulative roll bonding (ARB) process was used in this study as an effective method for manufacturing high-strength, finely-dispersed and highly-uniform A356 alloy. It was found that when the number of ARB cycles was increased, the uniformity of silicon particles in the aluminum matrix improved, the particles became finer and spheroider and therefore, the tensile strength (TS) and ductility of the samples improved. The microstructure of the manufactured A356 alloy after five ARB cycles indicated a totally modified structure such that it's TS and elongation values reached 269 MPa and 5.3% which were 2.6 and 2.5 times greater than those of the as-cast material, respectively. Also, the hardness value increased from 55.4 (for as-cast sample) to 100.2 HV (after the fifth cycle of ARB), and registered 81% increase.     

A comparative study between gravel and rubber drainage columns for mitigation of liquefaction hazards

Liquefaction is one of the most destructive natural hazards that cause damage to engineering structures during an earthquake. This study aims to examine the effect of rubber and gravel drainage columns on the reduction of liquefaction potential of saturated sandy soils using a shaking table. Experiments were carried out in various conditions such as construction materials, different arrangements and diameters of drainage columns. Effects of the relative density and the input motion on the base test were investigated as well. The results demonstrate that rubber drainage columns have slightly better performance compared to gravel drainage columns at high relative density and high input acceleration. Soil improvement using gravel drainage columns, which leads to reduction in liquefaction effects at moderate input acceleration and low relative density, is a more effective method than that using rubber drainage columns. By increasing the number and diameter of gravel and rubber drainage columns, deformations due to liquefaction are reduced. The drainage rate of gravel drains is higher than that of rubber drains after shaking. Totally, the outcomes indicate that densification is the most important factor controlling liquefaction.     

PEG-PLA-PCL based electrospun yarns with curcumin control release property as suture

This work presents an interesting method using an electrospinning process to fabricate suture yarns loaded with curcumin to achieve reasonable mechanical properties as well as tunable drug release behavior. Different structures including different yarn counts and twists as well as core-sheath structures were used to adjust drug release properties along with improving the yarn's mechanical properties. The core parts were made of polycaprolactone and the sheath parts were made of polyethylene glycol, polylactic acid, and polycaprolactone. Drugs can be incorporated in both parts based on the required condition and application. Electrospun yarns were compared using both structural properties and their drug release profiles as metrics. The results of comparing drug release profiles of six electrospun yarns with different yarn counts and twists showed that yarns with finer fiber diameters in the core part have more drug release as well as more initial release. Overall evaluations showed that core-sheath drugloaded yarn with appropriate physical and mechanical properties can be a useful material as a drug delivery system to the site of damaged tissue. It can also be concluded that the amount and duration of drug release can be controlled using the structural parameters of electrospun yarns as an engineering tool for designing suture yarns with required properties.     

Vibration and Critical Speed of Orthogonally Stiffened Rotating FG Cylindrical Shell Under Thermo-Mechanical Loads Using Differential Quadrature Method

In this article, an approximate solution using differential quadrature method is presented to investigate the effects of thermo-mechanical loads and stiffeners on the natural frequency and critical speed of stiffened rotating functionally graded cylindrical shells. Transverse shear deformation and rotary inertia, based on first-order shear deformation shell theory (FSDT), are taken into consideration. The equations of motion are derived by the Hamilton's principle while the stiffeners are treated as discrete elements. Material properties are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fraction of the constituents. The temperature field is assumed to be varied in the thickness direction. The equations of motion as well as the boundary condition equations are transformed into a set of algebraic equations applying the DQM. The results obtained include the relationship between frequency characteristics of different power-law index, rotating velocities, thermal loading and amplitude of axial load. To validate the present analysis, the comparison is made with a number of particular cases in literature. Excellent agreement is observed and a new range of results are presented for stiffened rotating FG cylindrical shell under thermo-mechanical loads which can be used as a benchmark to approximate solutions.     

Development of a High-Strength Ultrafine-Grained Ferritic Steel Nanocomposite

This article describes the microstructural and mechanical properties of 12YWT oxide-dispersion-strengthened (ODS)-ferritic steel nanocomposite. According to the annealing results obtained from X-ray diffraction line profile analysis on mechanically alloyed powders milled for 80 hours, the hot extrusion at 1123 K (850 °C) resulted in a nearly equiaxed ultrafine structure with an ultimate tensile strength of 1470 MPa, yield strength of 1390 MPa, and total elongation of 13 pct at room temperature comparable with high-strength 14YWT ODS steel. Maximum total elongation was found at 973 K (600 °C) where fractography of the tensile specimen showed a fully ductile dimple feature compared with the splitting cracks and very fine dimpled structure observed at room temperature. The presence of very small particles on the wall of dimples at 1073 K (800 °C) with nearly chemical composition of the matrix alloy was attributed to the activation of the boundaries decohesion mechanism as a result of diffusion of solute atoms. The results of Charpy impact test also indicated significant improvement of transition temperature with respect to predecessor 12YWT because of the decreased grain size and more homogeneity of grain size distribution. Hence, this alloy represented a good compromise between the strength and Charpy impact properties.     

Numerical and Experimental Investigation of Temperature Effect on Thickness Distribution in Warm Hydroforming of Aluminum Tubes

Reduction of weight and increase of corrosion resistance are among the advantageous applications of aluminum alloys in automotive industry. Producing complicated components with several parts as a uniform part not only increases their strength but also decreases the production sequences and costs. However, achieving this purpose requires sufficient formability of the material. Tube hydroforming is an alternative process to produce complex products. In this process, the higher the material formability the more uniform will be the thickness distribution. In this research, tube hydroforming of aluminum alloy (AA1050) at various temperatures has been investigated numerically to study temperature effect on thickness distribution of final product. Also a warm hydroforming set-up has been designed and manufactured to evaluate numerical results. According to numerical and experimental results in the case of free bulging, unlike the constrained bulging, increase of the process temperature causes more uniform thickness distribution and therefore increases the material formability.     

Study of connection detailing on SMRF seismic behavior for unequal beam depths

This study investigates the differences in the seismic behavior of Special Moment Resisting Frames (SMRF) with unequal beam depths, which can be affected by connection detailing arrangements. The studied connection detailing arrangements consist of continuity plate arrangements, such as straight or inclined continuity plates, coverplate, flange plate connections, and the haunch connection system on the shallow beam side, which can create some alternatives for the connection of the shallow beam and the deep beam to the column. In spite of the occurrence of this special case in everyday engineering practice, the codes do not take these special cases into consideration. Six full-scale experiments were performed in order to improve the understanding of the seismic behavior associated with this special case. Companion analyses were then conducted in order to consider the effects of the above-mentioned connection detailing arrangements on the analytical rupture indices. The results of the experiments and analyses have shown that the described connection detailing arrangements can achieve performance corresponding to story drift ratios of at least 4% to 6% before experiencing 20% strength degradation. By the use of a specific combination of a flange plate connection with a haunch connection system, crack propagation on the deep beam's bottom flange, which is observed in most connection detailing arrangements for this special case, can be eliminated.