Numerical evaluation of three-dimensional water impact by the displacement potential formulation

The numerical accuracy of the displacement potential approach for a three-dimensional water-impact problem is investigated. An examination of the elliptic paraboloid shows that the boundary-value problem for the displacement potential, as well as the velocity potential, can be solved accurately, even if the panel size of the numerical scheme is no small enough. The numerical accuracy of the position of the contact line is poor. However, the accuracy of the virtual mass is good because of the averaging effect along the contact line. A comparison with Scolan and Korobkin's designed body confirms the accuracy of the drop speed and the penetration displacement. The displacement potential approach is extended to the case of water impact with trapped air. The numerical accuracy of the calculated air pressure in the cavity is confirmed by comparison with an experimental result. With these results, the suitability of the displacement potential approach to the ship-slamming problem is demonstrated.     

[110]-surface strained-SOI CMOS devices

We have newly developed [110]-surface strained-silicon-on-insulator (SOI) n- and p-MOSFETs on [110]-surface relaxed-SiGe-on-insulator substrates with the Ge content of 25%, fabricated by applying the Ge condensation technique to SiGe layers grown on [110]-surface SOI wafers. We have demonstrated that the electron and the hole mobility enhancement of [110]-surface strained-SOI devices amounts to 23% and 50%, respectively, against the mobilities of [110]-surface unstrained MOSFETs. As a result, the electron and the hole mobility ratios of [110]-surface strained-SOI MOSFETs to the universal mobility of (100)-surface bulk-MOSFETs increase up to 81% and 203%, respectively. Therefore, the current drive imbalance between n- and p-MOS can be reduced. Moreover, both the electron and the hole mobilities of the [110]-surface strained-SOIs strongly depend on the drain current flow direction, which is qualitatively explained by the anisotropic effective mass characteristics of the carriers on a [110]-surface Si. As a result, the [110]-surface strained-SOI technology with optimization of the current flow directions of n- and p-MOS is promising for realizing higher speed scaled CMOS.     

Staurosporine and its derivatives enhance f-Met-Leu-Phe-induced superoxide production via phospholipase D activation in human polymorphonuclear leukocytes

Staurosporine (STAR) is one of the most potent inhibitors of protein kinase C (PKC). It is known that in human polymorphonuclear leukocytes (PMNs), the phorbol ester-induced generation of superoxide anion (respiratory burst) is effectively inhibited by STAR in a dose-dependent manner, whereas superoxide generation induced by chemoattractants, e.g. n-formyl-methionyl-leucyl-phenylalanine (FMLP) or PAF, is regulated biphasically by STAR. We compared the effects of STAR and K252a on FMLP-induced superoxide production from PMNs and examined the effects of propranolol, a inhibitor of phosphatidic acid (PA) phosphohydrolase, on the potentiation of the production by STAR. We also examined the effects of some derivatives of STAR and K252a on the production and the alteration of the effects induced by propranolol pretreatment. When PMNs were stimulated with FMLP, STAR potentiated superoxide production by 240.5 +/- 30.9% at a low concentration (100 nmol/l). Propranolol pretreatment specifically inhibited the potentiation. When phorbol-12-myristate-13-acetate (PMA) was used as a stimulant, STAR inhibited superoxide production dose-dependently and did not enhance the production. K252a inhibited PMA or FMLP-induced superoxide production dose-dependently and did not enhance FMLP-induced superoxide production. STAR derivatives showed potentiation of FMLP-induced superoxide production similar to that of STAR at concentrations ranging from 10-100 nmol/l, and propranolol (200 mumol/l) effectively inhibited it. K252a derivative NA332 did not show any potentiative effect on the production. PMA-induced superoxide production was inhibited by all compounds dose-dependently.(ABSTRACT TRUNCATED AT 250 WORDS)     

DNA sequence dependent binding modes of bis(vinylpyridinium)benzene derivatives

The DNA binding selectivity of new dicationic ligands based on the bis(vinylpyridinium)benzene unit has been investigated by means of UV-Vis absorption spectroscopy. From the experimental results it is concluded that these extended pi-electron bridged viologens have relatively high affinity to AT base pair sequences whereas the binding to GC pairs is about 10 times lower, and binding affinity depends on minor variation in the ligand structure. Linear type ligand exhibits two binding mode interaction, intercalation at high dye concentration which undergoes switching to groove binding at low ligand concentration.     

Fodrin is a constituent of the cortical lattice in outer hair cells of the guinea pig cochlea: immunocytochemical evidence

Localization of fodrin, a membrane skeletal protein, in the outer hair cell of the guinea pig cochlea was examined by immunocytochemical techniques. By immunofluorescence microscopy, fodrin was observed in the cuticular plate, in the infracuticular network and along the lateral wall. By immunoelectron microscopy of ultrathin cryosections, labeling for fodrin along the lateral wall was localized between the cell membrane and the outermost layer of the subsurface cisternae. Furthermore, pre-embedding immunoelectron microscopy of permeabilized specimens showed that most immunogolds for fodrin were on the thin cross-linking component of the cortical lattice. The results indicate that fodrin is a constituent of the cortical lattice which is thought to play an important role in outer hair cell motility.     

Structure-activity relationships of alkylxanthines: alkyl chain elongation at the N1- or N7-position decreases cardiotonic activity in the isolated guinea pig heart

Relationships between the alkyl substitutions (C1-C6) and cardiac inotropic activities of xanthine derivatives were studied in isolated guinea pig heart muscles. Most of the alkylxanthines exhibited positive inotropic activity on the left atrium, which was increased with an elongation of alkyl chain at the N3-position but decreased by substitution of a long alkyl group at the N1- or N7-position of the xanthine skeleton. Although positive inotropic activity in the right ventricular papillary muscle was also increased by longer alkyl groups at the N3-position, the inotropic activity became negative with an increment in alkyl chain length at the N1- or N7-position. The positive inotropic activity of alkylxanthines was correlated with their inhibitory activity on the phosphodiesterase (PDE) III isoenzyme. Adenosine A1 antagonism and PDE IV inhibitory activity were also partly associated with the inotropic activity because H-89, an inhibitor of cyclic AMP-dependent protein kinase, diminished the positive inotropic action and potentiated the negative inotropic action. These results indicate that the positive inotropic activity of alkylxanthines becomes weak with elongation of alkyl chains at the N1- and N7-positions; In particular, xanthines having two long alkyl chains show a negative inotropic activity on the right ventricular papillary muscle, an effect that could not be elucidated from their cyclic AMP-dependent action.     

Molecular Dynamics Simulation of Structural Relaxation of Asphaltene Aggregates

For asphaltene obtained from vacuum residue of Khafji crude oil, the energy-minimum conformation calculated by molecular mechanics-dynamics simulations showed that aggregated structures of asphaltene molecules through noncovalent interactions are more stable. Changes induced in aggregated structures by pretreatment with solvents were investigated using molecular dynamics calculations. The simulation showed that in quinolin at 573 K, some staking interactions could be disrupted, while, in 1-methylnaphthalene it was not observed. Autoclave experiments showed that the coke yield after pyrolysis at 713 K was decreased when the asphaltene was pretreated with quinoline at 573 K for 1 h, compared to the yield without the pretreatment. While, in the case of pretreatment in 1-methylnaphthalene, the coke yield did not change significantly. The simulation's results above can be related to the difference in coke yield between two solvents; in quinoline some aromatic-aromatic stacking interactions could be disrupted and mobility of molecules was increased. This resulted in prevention of the asphaltenes from polymerizing, as in condensation reactions among aromatic rings. Consequently, the coke yield after the pretreatment with quinoline was decreased.     

Static and Dynamic Spins in Superconducting La2−x Sr x CuO4: The Risø Years

One important area of modern condensed matter research is the investigation of the nature of the superconducting cuprates. Much progress in this field has been obtained with the technique of neutron scattering. We here present a review of neutron scattering studies of the high-temperature superconductor La_2?xSr_xCuO₄, performed at Risø National Laboratory. We review the work on the mapping of the incommensurate spin fluctuations, the investigation of the gap in the fluctuation spectrum, the magnetic properties of the vortices appearing in an applied field, and the quantum critical behaviour of the system. We discuss our findings in the light of results of neutron scattering from other groups, on other cuprate systems, and results from other experimental methods, e.g. NMR, μSR, STM, X-ray diffraction, and ARPES. We end with a discussion on the implications of the experimental results for the progress in the general understanding of high-temperature superconductivity. PACS numbers: 61.12.Ex, 74.20.Mn, 74.72.Dn, 75.25.+z, 78.70.Nx.     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125