Fe-Cr-Mn奥氏体合金的辐照体胀与诱起晶界偏析行为的研究SCIEI

本文采用电子束辐照,研究了Fe-15Cr-xMn合金以及添加W,V合金的孔洞体胀和诱起晶界偏析行为,并对包含晶界在内的辐照区进行成分分析。结果表明,在Fe-Cr-Mn系合金中孔洞体胀孕育期可以被强烈抑制,晶界偏析也减少。特别是,合金中添加W,V效果更加明显。用Mn代替Ni,通常要发生体胀和相的不稳定性,由于反Kirkendall效应导致Ni和Mn的扩散行为不同,使Fe富集在尾闾处,局部地区形成铁素体,有利于减少体胀和晶界偏析。     

建筑机械偏心荷载对开挖过程中沟槽稳定性的影响研究

通过在离心场中模拟沟槽开挖过程的模型试验,讨论挖掘机等建筑机械在开挖市政管线的沟槽过程中产生的偏心荷载对沟槽稳定性的影响。试验结果表明,沟槽的破坏形态与挖掘机中心荷载作用情况下相同。据此,可利用在中心荷载作用下求得的开挖深度极限分析上限解简化式,计算建筑机械偏心荷载作用下的沟槽开挖深度,并且所得计算结果与试验结果基本吻合。结果表明:偏心距对开挖深度的影响程度因挖掘机接触压力不同而不同。挖掘机接触压力越大,偏心距对开挖深度的影响也越大。     

研究开发适应于国际标准的SPM针尖特性表征结构

标准化是当前扫描探针显微镜领域(SPM)的一项重要工作.国际标准化组织ISO自2004年起已经将SPM标准化列入其工作框架之内,并建立了相关的分委员会、技术委员会和工作小组.本文介绍了国际上当前有关SPM标准化方面努力和主要趋势:SPM术语的标准化被认为是SPM标准化工作范围内首先需要考虑的问题,其相关标准即将发表;SPM数据管理及处理的标准化则是另一项正在进行的有利于数据访问、处理和共享的重要工作.可溯源计量型原子力显微镜(AFM)的发展解决了纳米尺度的度量问题,能够通过对标准物质进行定量分析与定标实现量值的传递.当前发展能够被计量型AFM鉴定的参考物质以及标准化仪器校正过程是实现SPM标准化之前的当务之急.为了促进SPM领域ISO标准的实现,一种新的针尖特性表征结构(tip characterizer)已经被开发出来.这种tip characterizer由超晶格组装技术实现,能够描述针尖的形状并且同时进行侧向尺度的校正.本文探讨了这种新型tip characterizer的性能.这种tip characterizer不易损坏针尖,具有很好的重复性,并能帮助实验观察分析针尖形状和结构几何特性之间的关系.     

Gel-Forming Characteristics and Rheological Properties of Kefiran

A water soluble polysaccharide “kefiran” produced by Lactobacillus kefiranofaciens was examined for its gel-forming and rheological properties. Kefiran (3%) formed gel in the presence of ethanol (4–10%). The gel strength in 8% ethanol was comparable to that of 3% gelatin gel in water. Addition of casein (3%) increased gel strength 1.5–2.0 fold. The unique properties of kefiran may make it a useful food additive.     

Development of Electrolytic Capacitor Less Photovoltaic Grid Connected Inverter with Boost‐Up Type Active Buffer Circuit

This paper proposes a configuration of a single‐phase voltage source inverter that features power decoupling capability. Generally, the converter connected to a single‐phase grid employs bulky dc link capacitors such as electrolytic capacitors in order to decouple the power ripple with twice the frequency of the power supply. The power ripple in the proposed circuit is compensated by an active buffer with small capacitors. In this paper, the fundamental operations of the proposed converter are confirmed by experimental results. From the experimental results, the output current total harmonic distortion (THD) is 3.51%, the ratio of the input current is 14.3%, and the output power factor is over 99%. In addition, the volume of the proposed circuit is reduced by 61% when the carrier frequency is 64 kHz compared to that with a carrier frequency of 16 kHz. Finally, from an evaluation of the power density using Pareto front curves, the proposed circuit achieves high power density in comparison with the conventional circuit.     

Twofold look-ahead search for multi-criterion job shop scheduling

The twofold look-ahead search ((TLAS) was proposed as a general purpose search technique and applied to single-criterion job shop scheduling. In the present study, this method is applied to multi-criterion scheduling problems with some modification and illustrated by bi-criterion scheduling with mean tardiness and mean flowtime. Application circumstances are divided into two situations according to the scheduling objective and TLAS is tested for each situation. From the computational results, the proposed method is found to generate higher performance schedules in comparison with other methods. Its algorithmic features and applicability to other problems are also discussed based on several experimental results.     

Power generation scheduling by neural network

A new method for solving a power generation scheduling problem in an electric power system is presented. The objective is to determine the hourly start-up/ shut-down schedules of all generators so that forecasted hourly power demands per day may be met and total operating costs, the sum of setup and fuel costs for a given day, may be minimized. The problem may be formulated as a large-scale combinatorial optimization problem which includes 0-1 variables representing the start-up/shut-down of generators and continuous variables representing the power outputs. Determination of an optimalsolution within practical time limits is consequently difficult. Until now, the lagrangian relaxation method has been studied as it appeared to be the most practical method for obtaining an approximate solution to the problem. The efficiency of this method, however, depends on how the Lagrange multipliers are determined. Here, it is proposed that the Lagrange multipliers be estimated by utilizing the neural network and results determined from examination of the possibility of applying the backpropagation algorithm to pattern recognitions which presume the relationship between power demand pattern and Lagrange multipliers are reported. Through numerical experiments, it was established that the Lagrange multipliers, estimated by the neural network, are applicable to the problem.     

ELECTRON RADIATION INDUCED VOID SWELLING AND GRAIN BOUNDARY SEGREGATION IN AN Fe-Cr-Mn AUSTENITIC ALLOY

The behavior of void swelling and segregation in Fe-15Cr-xMn alloys and an alloy con-taining small amount of W and V was investigated by electron-irradiation.The compositionalanalysis in the irradiated regions including grain boundaries was performed.The resultdts showthat there are many common features of irradiuation tehavior in the Fe-Cr-Mn andFe-Cr-Ni systems while there are some significant differences,In the Fe-Cr-Mn alloy sys-tems void swelling was rematrkably suppressed and at the same time the radiation-inducedsegregation was also retarded,furthermore,the segregation was strongly retarded in anFe-15Cr-15Mn alloy containing small amount of W and V.The results also show that Ni re-placed by Mn does not in general confer immunity from either swelling or phase instabilities.The phase instability is due to the different diffusion behavior of Ni and Mn in reponse to theoperation of the inverse-Kirkendall effecr.Fe segregates to the microstructural sinks in theFe-Cr-Mn alloys.The segregation of Fe often leads to the formation of ferrite.This fact isbeneficial to reducing the swelling rate and segregation on the grain boundaries.     

砂土地基承载力离心模型试验中的粒径效应研究

通过对原型的模拟结果进行总结,得出对于承载力试验只要离心试验中的模型基础宽度与重力场试验中的不同,离心模型试验结果总大于重力场试验结果,即离心试验中总是存在粒径效应问题。随着模型基础宽度与地基材料平均粒径比值的增大,离心试验结果逐渐接近重力场试验结果;当比值足够大时,离心试验结果趋于稳定且与重力场试验结果之差可忽略不计。因此,可以利用模型的模拟的方法,讨论离心模型试验中的粒径效应问题。在一系列砂土地基上条形基础地基承载力的离心模型试验中,使模型基础宽度与地基材料平均粒径的比值在较大范围内变化,即最大比值为最小比值的5倍,且其变化范围的上限达291。基于试验结果导入评价粒径效应对试验结果影响程度的指标,定量地讨论了离心模型试验中的粒径效应问题。本试验结果表明,当模型基础宽度与地基材料平均粒径的比大于233时,粒径效应对试验结果的影响小于1%,基本可忽略不计。