Current Status and Trend of Internet and E-Commerce Market in Korea

After the remarkable increase of Internet users and broadband Internet subscribers at the end of the 20th century, the size of Korean Internet and e-commerce market steadily increased but the growth rate has been either stagnant or decreased. Trends of Korean Internet and e-commerce market are summarized in this paper the trends on Internet usage are introduced. Trends of online games, blogs and wireless Internet are introduced. The trends of Korean Internet market may have implications for China and Japan.     

EFFECTS OF OIL DROPLETS ON PHYSICAL AND SENSORY PROPERTIES OF O/W EMULSION AGAR GEL

Effects of oil droplets in an agar gel matrix were investigated by mechanical analyses and sensory evaluation. The results for compressive and puncture properties were expressed in terms of relative values. All compressive properties; stress, strain and compressive energy of emulsion gels, as obtained by compression tests, decreased with both increases of oil droplet size and oil volume fraction. The stress, strain and energy of the emulsion gels obtained by puncture tests did not change with an increase in oil droplet size. Results of sensory evaluation showed that the sample containing small oil droplets was harder than that with large oil droplets. On the other hand, the large oil droplet sample was oilier than that with small oil droplets. The sensory evaluations for hardness and oiliness of emulsion gels did not exhibit significant relations to most of the properties of mechanical analyses.     

A four-channel 3.125-Gb/s/ch CMOS serial-link transceiver with a mixed-mode adaptive equalizer

This work presents a quad-channel serial-link transceiver providing a maximum full duplex raw data rate of 12.5Gb/s for a single 10-Gbit eXtended Attachment Unit Interface (XAUI) in a standard 0.18-/spl mu/m CMOS technology. To achieve low bit-error rate (BER) and high-speed operation, a mixed-mode least-mean-square (LMS) adaptive equalizer and a low-jitter delay-immune clock data recovery (CDR) circuit are used. The transceiver achieves BER lower than <4.5/spl times/10/sup -15/ while its transmitted data and recovered clock have a low jitter of 46 and 64 ps in peak-to-peak, respectively. The chip consumes 178 mW per each channel at 3.125-Gb/s/ch full duplex (TX/RX simultaneous) data rate from 1.8-V power supply.     

Attachment of Salmonella typhimurium to Poultry Skin as Related to Cell Viability

³H-labeled S. typhimurium cells inactivated by gamma-radiation (⁶⁰Co) and by formaldehyde (5%) were used to determine if cell viability affected attachment to poultry skin. Both gamma-irradiated and formal-dehyde-treated cells attached like live cells. There was no difference in attachment between cells grown in a chemically defined medium (SCDM) or in brain heart infusion broth (BHI). Live and gamma-irradiated cells and BHI-grown and SCDM-grown cells had similar surface hydrophobicity. Live and gamma-irradiated cells had similar cell surface charges, whereas BHI and SCDM-grown cells had different surface charges. Differences in cell surface charge did not affect attachment rate.     

Mechanical Properties and Chemical Composition of Peanuts as Affected by Harvest Date and Maturity

Harvest date and maturity (by the Hull Scrape method) were compared to mechanical properties and chemical composition of peanuts. In general, later-harvested or mature peanuts exhibited higher cutting and shear-compression forces, shear-compression energy and slope of force-deformation curve than earlier-harvested or immature peanuts. Mesocarp color of peanuts could be used as an index to group peanuts with similar shear-compression energy (sensory crunchiness). Harvest date did not affect dry basis chemical composition except carbohydrates content decreased slightly as digging was delayed. Oil content increased and carbohydrates decreased as peanuts matured. Total unsaturated fatty acids content increased with maturity.     

QUANTITATIVE ANALYSIS OF TEXTURE CHANGE IN COD MUSCLE DURING FROZEN STORAGE

The textural deterioration of cod muscle during frozen storage was investigated by objective measurement using the Instron Universal Testing Machine. The rates of texture change as a function of storage time revealed that the increased toughness and decreased cohesiveness could be described by a first-order relationship. Higher storage temperatures resulted in more rapid rates of textural deterioration. Larger activation energy constants for toughness of cod muscle as compared to cohesiveness indicated that toughening was more temperature dependent than cohesiveness. The increased toughness and the decreased cohesiveness of frozen-stored fish appeared to be related to the protein denaturation of the cod muscle and the loss of water-holding capacity, respectively.     

Development of a simple model for batch and boundary information updation for a similar ship’s block model

In early 2000,large domestic shipyards introduced shipbuilding 3D computer-aided design (CAD) to the hull production design process to define manufacturing and assembly information.The production design process accounts for most of the man-hours (M/H) of the entire design process and is closely connected to yard production because designs must take into account the production schedule of the shipyard,the current state of the dock needed to mount the ship’s block,and supply information.Therefore,many shipyards are investigating the complete automation of the production design process to reduce the M/H for designers.However,these problems are still currently unresolved,and a clear direction is needed for research on the automatic design base of manufacturing rules,batches reflecting changed building specifications,batch updates of boundary information for hull members,and management of the hull model change history to automate the production design process.In this study,a process was developed to aid production design engineers in designing a new ship’s hull block model from that of a similar ship previously built,based on AVEVA Marine.An automation system that uses the similar ship’s hull block model is proposed to reduce M/H and human errors by the production design engineer.First,scheme files holding important information were constructed in a database to automatically update hull block model modifications.Second,for batch updates,the database’s table,including building specifications and the referential integrity of a relational database were compared.In particular,this study focused on reflecting the frequent modification of building specifications and regeneration of boundary information of the adjacent panel due to changes in a specific panel.Third,the rollback function is proposed in which the database (DB) is used to return to the previously designed panels.     

铜元素和退火温度对TRIP冷轧钢板组织和力学性能的影响

将含铜和不含铜的两种TRIP钢板(0．2％C、1．5％Si、1．5％Mn)冷轧至1mm厚，然后分别在750℃、760℃、770℃、780℃下退火5min，最后在450℃等温3min，获得了不同含量和不同稳定性的残留奥氏体。金相和力学性能试验结果表明，铜元素能提高残留奥氏体量和钢板的力学性能；退火温度影响残留奥氏体量和力学性能，当退火温度选择在Ac1 10％时可获得最佳的力学性能。     

Efective Object Identification and Association by Varying Coverage Through RFID Power Control简

This paper presents an effective power scheduling strategy for energy efficient multiple objects identification and association. The proposed method can be utilized in many heterogeneous surveillance systems with visual sensors and RFID （radio-frequency identification） readers where energy efficiency as well as association rate are critical Multiple objects positions and trajectory estimates are used to decide the power level of RFID readers. Several key parameters including the time windows and the distance separations are defined in the method in order to minimize the effects of RFID coverage uncertainty. The power cost model is defined and incorporated into the method to minimize energy consumption and to maximize association performance. The proposed method computes the power cost using the range of the outermost position for possible single association and group associations at every sampling time. An RFID reader is activated with the proper coverage range when the power cost for the current time is lower than the power cost for the next time sample. The simplicity of the power cost model relieves the problematic combinatorial comparisons in multiple object cases. The performance comparison simulation with the minimum and maximum energy consumption shows that the proposed method achieves fast single associations with less energy consumption. Finally, the realistic comparison simulation with the fixed range RFID readers demonstrates that the proposed method outperforms the fixed ranges in terms of single association rate and energy consumption.