A Realistic Timing Test Model and Its Applications in High-Speed Interconnect Devices

This paper extends the timing test model in [5] to be more realistic by including the effects of the test fixtures between a device under test and a tester. The paper enables analyzing the trade-offs that arise between the predicted yield and the required overall test environment timing accuracy (OTETA) which involves the tester overall timing accuracy (OTA) and the test fixtures' impacts. We specifically focus on the application of the extended model to predict the test yield of standard high-speed interconnects, such as PCI Express, Parallel/Serial RapidIO, and HyperTransport. The extended model reveals that achieving an actual yield of 80% with a test escape of 300 DPM (Defects Per Million) requires an equivalent OTETA that is about half the acceptable absolute limit of the tested parameter. Baosheng Wang received his B.S. degree from Beijing University of Aeronautics and Astronautics (BUAA), Beijing, P.R. China, in 1997 and M.S. degree from Precision Instrument & Mechanical Engineering from the Tsinghua University, Beijing, P. R. China in 2000. In 2005, he received his Ph.D. degree in Electrical Engineering from the University of British Columbia (UBC), Vancouver, BC, Canada. During his Master study, he was doing MEMS, Micro Sensors and Digital Signal processing. From 2000 to 2001, he worked in Beijing Gaohong Telecommunications Company as a hardware engineer in ATM technology. Currently, he is a Design-for-Test (DFT) engineer at ATI Technologies Inc., Markham, Ontario, Canada. He publishes widely at international conferences and journals. His primary research interests are time-driven or timing-oriented testing methodologies for System on-a-Chip (SoC). These fields include test time reduction for SRAMs, accelerated reliability test for non-volatile memories, yield analysis for SoC timing tests, SoC path delay timing characterization and embedded timing measurements. Andy Kuo is currently a Ph.D student of System on a Chip (SoC) Research Lab at the Department of Electrical and Computer Engineering, University of British Columbia. He received his M.A.Sc. and B.A.Sc in electrical and computer engineering from University of British Columbia and University of Toronto in 2004 and 2002 respectively. His research interests include high-speed signal integrity issues, jitter measurement, serial communications. Touraj Farahmand received the B.Sc. degree in Electrical Engineering from Esfahan University of Technology, Esfahan, Iran in 1989 and the M.Sc. in Control Engineering from Sharif university of Technology, Tehran, Iran in 1992. After graduation, he joined the Electrical and Computer Research center of Esfahan University of Technology where he was involved in the DSP algorithm development and design and implementation of the control and automation systems. Since October 2001, he has been working in the area of high-speed signal timing measurement at SoC (System-on-a-Chip) lab of UBC (University of British Columbia) as a research engineer. His research interests are signal processing, jitter measurement, serial communication and control. André Ivanov is Professor in the Department of Electrical and Computer Engineering, at the University of British Columbia. Prior to joining UBC in 1989, he received his B.Eng. (Hon.), M. Eng., and Ph.D. degrees in Electrical Engineering from McGill University. In 1995–96, he spent a sabbatical leave at PMC-Sierra, Vancouver, BC. He has held invited Professor positions at the University of Montpellier II, the University of Bordeaux I, and Edith Cowan University, in Perth, Australia. His primary research interests lie in the area of integrated circuit testing, design for testability and built-in self-test, for digital, analog and mixed-signal circuits, and systems on a chip (SoCs). He has published widely in these areas and holds several patents in IC design and test. Besides testing, Ivanov has interests in the design and design methodologies of large and complex integrated circuits and SoCs. Dr. Ivanov has served and continues to serve on numerous national and international steering, program, and/or organization committees in various capacities. Recently, he was the Program Chair of the 2002 VLSI Test Symposium (VTS'02) and the General Chair for VTS'03 and VTS'04. In 2001, Ivanov co-founded Vector 12, a semiconductor IP company. He has published over 100 papers in conference and journals and holds 4 US patents. Ivanov serves on the Editorial Board of the IEEE Design and Test Magazine, and Kluwer's Journal of Electronic Testing: Theory and Applications. Ivanov is currently the Chair of the IEEE Computer Society's Test Technology Technical Council (TTTC). He is a Golden Core Member of the IEEE Computer Society, a Senior Member of the IEEE, a Fellow of the British Columbia Advanced Systems Institute and a Professional Engineer of British Columbia. Yong Cho received the B.S. degree from Kyung Pook National Unviersity, Korea, in 1981 and the M.S. degree from in electrical and computer engineering from the University of South Carolina, Columbia, S.C., in 1988 and the Ph.D. degree in electrical engineering and applied physics from Case Western Reserve University, Cleveland, OH, in 1992. He is currently a Professor with the Department of Electronics Engineering, Konkuk University, Seoul, Korea. His recent research interests include SoC Design and Verification, H/W and S/W co-design, and embedded programming on SoC. Sassan Tabatabaei received his PHD in Electrical Engineering from the University of British Columbia, Vancouver, Canada in 2000. Since then, he has held several senior technical positions at Vector12 Corp, Guide Technology, and Virage Logic. His professional and research interests include mixed-signal design and test, and signal integrity and jitter test methodologies for high-speed circuits and multi-Gbps serial interfaces. He has published several papers and holds a US patent in the area of timing and jitter measurement. Currently, he holds the position of the director for embedded test at Virage Logic Corporation.     

Effect of CdO addition on photon,electron, and neutron attenuation properties of boro-tellurite glasses

This research article aims to study the effect of CdO addition on the radiation shielding characteristics of boro-tellurite glasses in the composition of 50B₂O₃ - (50-x) TeO2- xCdO, where x = 0, 10, 20, 30, 40 and 50 mol%. These glasses were exposed to gamma radiation and the transmitted gamma photons were evaluated for energies varying from 15 keV to 15 MeV using Geant4 simulation toolkit. The number of transmitted photons was then used to characterize the gamma shielding for the studied glasses in terms of linear/mass attenuation coefficients, MFP, Z_eff, and HVL. The simulation outcomes were theoretically confirmed by using Phy-X software. The beta (electron) shielding characterization of the involved glasses was also investigated by determining the projectile range and stopping power using ESTAR software. Additionally, the fast neutron shielding characterization of the glasses was achieved by evaluating removal cross-section (Σ_R). The results reveal that the CdO has a small influence on the shielding performance of the boro-tellurite glasses against gamma, beta, and neutron radiations. The shielding performance of the boro-tellurite glasses was compared with that of common shielding materials in terms of MFP. It can be concluded that the boro-tellurite glasses regardless of the concentration of CdO content have promising shielding performance to be used for radiation applications.     

Effect of exchanging PbO with NiO on the structure and optical parameters action of some lanthanum borate oxide glasses

Journal of Materials Science: Materials in Electronics - This work is an attempt to estimate the effect of the exchanging of PbO with NiO on the optical and structural parameters for some...     

Impact of graphite impurities on the structure and optical properties of the sodium borate oxide glass

For the carbon-based glass fabrication/manufacture process, different amounts of pure graphite powder were added up to 100 wt.% of sodium tetraborate oxide (the weight of one mole of the sodium tetraborate is 381.372 g/mol) and then melted at 950 °C for 2 h before fast quenching in the air at RT. The resulted solids were examined by the XRD and SEM techniques, which confirmed the amorphous natures for studied samples. FTIR spectroscopy showed that some C-atoms are shared in the glass network as C–O and CO₂. In contrast, the UV–Vis showed that the increase in the graphite contents/impurities causes a red shift in the value of the optical edge and the value of Fermi energy. Also, the increase of the graphite impurities causes a decrease in the bandgap values of both direct and indirect electronic transitions. Both the values of Urbach energy and the metallization indicated an increase in the crystallinity degree as the graphite content increase. A graphite-based glass is a promising material for wide-scale applications.

     

The effect of royal jelly and propolis alone and in combination on inhibition of Aspergillus parasiticus growth,aflatoxin production,and aflR gene expression

The objective of this study was to determine the inhibitory effect of royal jelly (RJ) and propolis on growth, aflatoxin production and aflR gene expression in Aspergillus parasiticus. Inhibitory effect of RJ and propolis against a standard strain of A. parasiticus(ATCC 15517) was determined alone and in combination in accordance with the CLSI M38-A2 and checkerboard methods, respectively. The aflatoxin concentrations in the control and treated media were determined by HPLC. Also, the quantitative changes in the aflR gene expression were analyzed. The minimum inhibitory concentrations (MIC) of RJ and propolis alone were 3,200 and 100μg/ml, respectively. Also, the MICs of RJ and propolis in combination were 200 and 25μg/ml, respectively. When combined, a synergistic interaction was observed with a FICI of 0.312. Total levels of aflatoxin decreased from 386.1ppm to 8.72, 3.01 and 1.75ppm at 1,600μg/ml of RJ, 50μg/ml of propolis and 100+12.5μg/ml of RJ and propolis, respectively. In addition, the level of afIR gene expression was significantly decreased after treatment with RJ and propolis extracts alone and with their combination. The findings reveal that RJ and propolis extracts, either alone or in combination, have a significant inhibitory effect on aflR gene expression in aflatoxin production.     

Dynamic evolution control for synchronous buck DC–DC converter: Theory,model and simulation

This paper proposes a new control technique for synchronous buck DC–DC converter. Theory, design and implementation of the proposed control technique are provided. A new approach for converter controller synthesis based on dynamic evolution control theory is presented. In order to synthesize the converter controller, this method uses a simple analysis of nonlinear equation models of the converter. The synthesis process is simple and requires a quite low bandwidth for the controller. Therefore, this control method is suitable for digital control implementation. As an illustrative example, the synthesis of synchronous buck DC–DC converter controller is discussed in detail. The model of the synchronous buck DC–DC converter system was implemented using SimPowerSystems toolbox of MATLAB-SIMULINK. Performance of the proposed dynamic evolution control under step load change and step input voltage condition was investigated. Simulation results confirm that the proposed control method is superior to traditional PI based controller because of fast transient response and good disturbance rejection.     

轴质量对用液体油膜轴承支承转子动特性的影响

本文研究了轴质量对支承于液体油膜轴承上的转子的影响.转子假定是位于弹性轴中部的薄盘,它考虑非零弹性轴质量由液体油膜轴承支承.该径向轴承假定为短简易型,用纵向的和相互作用的刚度及阻尼系数表示,这些系数与系统的角速度有关.假定转于由一电机加速,假定电机速度由一两阶传递函数控制.仿真结果表示质量比的小值,它由轴质量对盘质量比...     

Evaluation of gamma ray buildup factor data in water with MCNP4C code

The exposure buildup factors for gamma and X-ray photons in water are computed using the MCNP4C code. The results are obtained for the energy range 0.04–6 MeV and penetration depths up to 10 mfp. The results are compared with the published buildup factor data during 1960–2010. Both agreements and discrepancies are observed between our results and the data appearing in the literature. It is concluded that at higher energies and deep penetration the existing data for photon buildup factor in water are still inadequate.