Heat Gelling Properties of Hen's Egg Yolk Low Density Lipoprotein (LDL) in the Presence of Other Protein

Ovalbumin (OV), bovine serum albumin (BSA) and lysozyme (Lys) were added to egg yolk low density lipoprotein (LDL) and the heat-induced gel formation of LDL-protein mixture was studied. The gel formation of LDL-protein mixture was different between the acidic and alkaline pH region; fine stable gels were formed in the alkaline pH region, but weak paste-like gels were formed in the acidic pH region. The effect of added BSA or OV on the gel strength of LDL was much larger than that of Lys. Scanning electron micrographic observation showed that the microstructures of both LDL-BSA and LDL-OV gels were more uniform than that of LDL-Lys gel.     

Advanced resonant ultrasound spectroscopy for measuring anisotropic elastic constants of thin films

This paper presents an advanced resonant ultrasound spectroscopy (RUS) method to determine the elastic constants C_ij of thin films. Polycrystalline thin films often exhibit elastic anisotropy between the film growth direction and the in‐plane direction, and they macroscopically show five independent elastic constants. Because all of the C_ij of a deposited thin film affect the mechanical resonance frequencies of the film/substrate layer specimen, measuring resonance frequencies enables one to determine the C_ij of the film with known density, dimensions and the C_ij of the substrate. Resonance frequencies have to be measured accurately because of low sensitivity of the C_ij of films to them. We achieved this by a piezoelectric tripod. Mode identification has to be made unambiguously. We made this measuring displacement–amplitude distributions on the resonated specimen surface by laser Doppler interferometry. We applied our technique to copper thin film and diamond thin film. They show elastic anisotropy and the C_ij smaller than bulk values of C_ij. Micromechanics calculations indicate the presence of incohesive bonded regions.     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

东京电力公司采用特高压输电技术的论证经过

东京电力公司(Tokyo Electric Power Company,TEPCO)在20世纪90年代建成了1000kV南北输电线路和1000kV东西输电线路.文中介绍了日本选择特高压输电技术的经过和TEPCO采用特高压输电的必要性,指出了选择特高压交流最高运行电压时应考虑的因素;还对交流输电方式和直流输电方式进行了比较,分析了直流输电方式存在的问题,说明了TEPCO在特高压输电中采用交流输电方式的原因.对中国发展特高压输电有一定的借鉴意义.     

Computed tomographic evaluation of gas hole formation and structural quality in Gouda‐type cheese

Computed tomography (CT) was performed on Gouda‐type cheese during ripening to evaluate gas hole formation and structural quality. The cheese was exposed to different ripening conditions, including variations in ripening temperature and concentration of butyric acid bacteria. Computed tomography images were obtained every 2 weeks for 16 weeks to assess the volume, shape and location of gas holes. The results demonstrate that CT makes the nondestructive monitoring of cheese gas hole formation and evaluation of the structural features of cheese possible throughout the ripening period.     

污水处理排放水对小流量河流水体生态的影响

针对日本国鬼怒河流域小流量河流,通过对河床上附着生物膜的组成、底栖生物、细菌活性分析和AGP试验,研究了污水厂二级处理排放水对小流量河流生态的影响.研究表明,当污水厂二级处理排放水占河流流量比例较大时(研究河流所占比例为35%),同样会引发河流富营养化和影响河流水体的生态.因此,从保护水环境及其生态考虑,有必要对污水进行深度处理.     

Preparation of Cu(In,Ga)(S,Se)2 thin films by sequential evaporation and annealing in sulfur atmosphere

Cu(In,Ga)(S,Se)₂ thin films with high Ga/III ratio (around 0.8) were prepared by sequential evaporation from CuGaSe₂, CuInSe₂, In₂Se₃ and Ga₂Se₃ compounds and then annealing in H₂S gas atmosphere. The annealing temperature was varied from 400 to 500 °C. These samples were characterized by means of XRF, EPMA, XRD and SEM. The S/(S+Se) mole ratio in the thin films increased with increase in the annealing temperature, keeping the Cu, In and Ga contents nearly constant. The open circuit voltage increased and the short circuit current density decreased with increase in the annealing temperature. The best solar cell using Cu(In,Ga)(S,Se)₂ thin film with Ga/(In+Ga)=0.79 and S/(S+Se)=0.11 annealed at 400 °C demonstrated V_oc=535 mV, I_sc=13.3 mA/cm², FF=0.61 and efficiency=4.34% without AR-coating.     

Multifunctional Initiator with Platinum-Acetylide Dendritic Core for Living Polymerization of Isocyanides

A novel multifunctional initiator has been developed by peripheral modification of a Pt-acetylide dendrimer. Pd–Pt μ-ethynediyl units were introduced to the first-generation dendrimer by a divergent method. The dendritic initiator was applicable to the living polymerization of aryl isocyanides, producing high molecular weight polymers with a narrow polydispersity index in quantitative yields. The ³¹P NMR spectrum of the resulting polymer suggested that all Pd–Pt μ-ethynediyl units in the dendritic molecule actually functioned as an initiator.     

Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.