High-performance self-aligned SiGeC HBT with selectively grown Si/sub 1-x-y/Ge/sub x/C/sub y/ base by UHV/CVD

Si/sub 1-x-y/Ge/sub x/C/sub y/ selective epitaxial growth (SEG) was performed by cold-wall, ultrahigh-vacuum chemical vapor deposition, and the effects of incorporating C on the crystallinity of Si/sub 1-x-y/Ge/sub x/C/sub y/ layers and the performance of a self-aligned SiGeC heterojunction bipolar transistor (HBT) were evaluated. A Si/sub 1-x-y/Ge/sub x/C/sub y/ layer with good crystallinity was obtained by optimizing the growth conditions. Device performance was significantly improved by incorporating C, as a result of applying Si/sub 1-x-y/Ge/sub x/C/sub y/ SEG to form the base of a self-aligned HBT. Fluctuations in device performance were suppressed by alleviating the lattice strain. Furthermore, since the B out diffusion could be suppressed by incorporating C, the cutoff frequency was able to be increased with almost the same base resistance. A maximum oscillation frequency of 174 GHz and an emitter coupled logic gate-delay time of 5.65 ps were obtained at a C content of 0.4%, which shows promise for future ultrahigh-speed communication systems.     

Development and exploitation of a multipurpose CFD tool for optimisation of microbial reaction and sludge flow.

A numerical analysis technique for optimisation of microbial reaction and sludge flow has been developed in this study. The technique is based on the 3D multiphase Navier-Stokes solver with turbulence models. In order to make numerical analyses of the total processes in wastewater treatment plants possible, four numerical models, the microbial reaction model, a sludge settling model, oxygen mass transfer model from coarse bubbles, and a model from fine bubbles, are added to the solver. All parameters included in those models are calibrated in accordance with experimental results, and good agreements between calculated results and experimental results are found. Finally, this study shows that the numerical technique can be used to optimise wastewater treatment plants with an example of the operational optimisation of an intermittent agitation in anoxic reactors by coarse bubbles. With a proper appreciation of its limit and advantages, the exploitation of the CFD efficiently leads us to the right direction even though it is not quantitatively perfect.     

Impact of crosstalk in an arrayed-waveguide multiplexer onN×N optical interconnection

The impact of crosstalk in an arrayed-waveguide N×N wavelength multiplexer is investigated precisely in relation to its application to wavelength-routing N×N all optical networks. In such systems multiple crosstalk light which has the same wavelength as the signal results in signal-crosstalk beat noise. We confirm that the noise is Gaussian and obtain the relation between crosstalk and power penalty. It is shown that the crosstalk must be less than -38 dB for a 16×16 system to keep the power penalty below 1 dB at a bit error rate of 10^-9     

A Model of the Relationship Between Psychosocial Variables and Diurnal Cortisol Rhythm Under Chronic Stress by Using Structural Equations

By using structural equations, we investigated the effect of chronic stress on salivary cortisol rhythm and proposed a causal model of chronic stress by using psychosocial and physiological data. First, 111 healthy workers (48 males, 63 females) completed questionnaires on chronic stress and lifestyle habits. Then, they provided saliva samples and answered questionnaires that were prepared to assess their psychological states 5 times (on waking up and at 10:00, 11:40, 14:00, and 16:00) on workdays. Structural equation modeling (SEM) revealed that chronic stress and longer commuting time resulted in sleep irregularities and this disrupted the cortisol circadian rhythm. This suggests that chronic stress disrupts the cortisol circadian rhythm even in healthy individuals, and sleep regularity mediates the effect of chronic stress on the cortisol rhythm.

     

Integrated-optic double-ring resonators with a wide free spectralrange of 100 GHz

Integrated-optic double-ring resonators with a wide free spectral range (FSR) of 100 GHz are fabricated using GeO₂-doped silica waveguides with a high relative refractive index difference (Δ) of 1.5%. The resonators are composed of two ring resonators comprising small ring waveguides with radii of 1.75 and 2.0 mm. The double-ring resonator module exhibited a wide FSR of 98.0 GHz, a finesse of higher than 138, a low crosstalk of less than -11.7 dB, and a low insertion loss of 6.1 dB. The measured FSR of 98.0 GHz is wider than any previously reported ring resonator composed of optical waveguides     

Addition of cisapride shortens colonoscopy preparation with lavage in elderly patients

The major envelope protein, p35, of vaccinia virus (VV; strain LIVP) was purified by extraction from virions with the non-ionic detergent Nonidet P-40. The protein was cleaved with CNBr. Four homogeneous peptides were isolated and their N-terminal amino-acid (aa) sequences determined. A computer search of a protein sequence databank revealed complete identity of the determined sequences with aa 44-63, 144-149, 154-165 and 224-238 of ORF H3 of the HindIII-H fragment of the VV genome [Rosel et al., J. Virol. 60 (1989) 436-446]. Earlier, Gordon et al. [Virology 167 (1988) 361-369] determined that the p35 surface protein of VV strain IHD-W is encoded by the H6 gene. Muravlev et al. [Biopolymery i kletka 6 (1990) 83-89 (Russian)] deduced from their data that gene A2 encodes this prominent antigen. Taking into account this ambiguity, we cloned the genes H3, H6 and A2 in expression vectors, prepared the specific antisera against the expression products and conducted the immunochemical analysis of the recombinant and native VV-specific proteins. It has been established that the H6 codes for an early protein that is found only in the infected cell extracts, but is absent in mature virions. The immunodominant protein p35 of VV strain LIVP is encoded by the gene H3. The gene A2 protein product is present mainly in the infected cell extract, but the antiserum against the A2 product shows a rather weak interaction with the 35-kDa fraction of structural VV proteins resolved by electrophoresis.     

New low-noise output amplifier for high-definition CCD image sensor

A new low-noise charge-coupled-device (CCD) output amplifier, the RJG detector, has been developed. The RJG detector incorporates a JFET which has an electrically floating ring-junction gate (RJG). The operating principle of the amplifier is that signal charges, transferred from the CCD into the RJG, directly modulate the drain current in the detection JFET. The performance of the detector was evaluated by operating test devices under a 37-MHz clock frequency, which is the same frequency as that for the horizontal CCD operation in the recently developed 2-million-pixel high-definition CCD image sensor. It was found that 1/f noise was reduced by introducing the JFET and that reset noise was completely eliminated by achieving complete charge transfer through the reset operation. As a result, input referred noise equivalent electrons within the 18.5-MHz baseband were reduced to 17 (electrons)     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.