Effect of polyurethane surface chemistry on its lipid sorption behavior

The relationships among surface, bulk properties and lipid sorption behaviors of segmented polyurethanes (SPUs) with various polyol soft segments were investigated. The polyols used in this study were poly(ethylene oxide) (PEO), poly(tetramethylene oxide) (PTMO), and poly(dimethylsiloxane) (PDMS). The hard segment of these segmented polyurethanes was composed of 4,4'-diphenylmethane diisocyanate and 1,4-butanediol, present at 50 wt%. X-ray photoelectron spectroscopic (XPS) and dynamic contact angle measurements were carried out in order to analyze the surface chemical structure in the air- and water-equilibrated states. XPS revealed that in the air-equilibrated state, lower surface free energy components were enriched at the air-solid interface, whereas in the water-equilibrated state, higher surface free energy components were enriched at the water-solid interface. The change in environment from air to water induced the surface reorganization in order to minimize interfacial free energy. Lipid sorption behaviors of SPUs were investigated by means of infrared spectroscopy. Even after extensive rinsing of the surface, the amount of lipid present on the SPU surface was more than that calculated on the assumption that a monolayer covers the SPU surface. Therefore, the lipid was not only adsorbed on the surface of SPU but absorbed into SPU. The SPU with hydrophilic PEO sorbed larger amount of phospholipid compared with that with hydrophobic polyol such as PTMO and PDMS. Also, the competitive sorption behaviors of phospholipid and cholesterol from their mixed liposome solution were studied. The ratio of sorbed cholesterol to phospholipid increased with an increase in surface hydrophobicity owing to the hydrophobic nature of cholesterol.     

Breed differences in the histochemical properties of the M. pubo-ischio-femoralis pars medialis myofibre of domestic cocks

1. Histochemical properties of M. pubo-ischio-femoralis pars medialis (PIF muscle) were compared in 7 breeds of cocks. This muscle was largely composed of Type I fibres and their transitional form (Type I tr). Type IIA fibres were observed in the cranial part. 2. The weight and cross-sectional area of the PIF muscle increased with increasing body weight. However, the relative muscle development to body weight differed among the 7 breeds. 3. A quarter of Type I fibres were of the transitional variety in bantam fowls. Conversely, few, if any, Type I tr fibres were observed in the large breeds where the muscle was poorly developed. 4. As the histochemical properties of Type I fibres made an effective response to the different body weights and the relative PIF muscle development among breeds, it was concluded that PIF muscle performed an important function in supporting the body weight and maintaining posture.     

Effects of Pre-Treatment of a Silica-Supported Gallium Oxide Catalyst with H2 on Its Catalytic Performance for Dehydrogenation of Propane

The pre-treatment of a silica-supported gallium oxide catalyst with H₂ at 823 K increased the yield of aromatics and the selectivity to aromatics in the dehydrogenation of propane over the catalyst at 823 K. Gallium oxide in the catalyst was partially reduced with H₂ at 823 K. NH₃ desorption and DRIFTS studies on the gallium oxide catalyst suggest that the dehydrogenation of propane over a silica-supported gallium oxide catalyst would proceed in the following way: (1) the dehydrogenation of propane to produce propene would occur on Ga sites including Ga^δ+–H sites and (2) the aromatization of propene to aromatics on Ga–O–H acid sites.     

Application of polymerizable surfactant in the preparation of polystyrene/nano-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> composite

Monooctadecyl maleate, as a polymerizable surfactant, was synthesized by the mono-esterification of maleic anhydride and octadecanol, and was utilized to surface-modify nano-Fe₃O₄ particles. A polymerizable magnetic fluid was obtained by directly dispersing modified nano-Fe₃O₄ particles into styrene monomer, and the polystyrene/nano-Fe₃O₄ composite was prepared through free radical polymerization of polymerizable magnetic fluid. The structure and dispersion status in different dispersion phases of modified nano-Fe₃O₄ particles were studied by Fourier transform infrared (FTIR) spectrometry, X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The experimental results show that the nano-Fe₃O₄ particles modified by monooctadecyl maleate with the size of about 7–10 nm can be uniformly dispersed into styrene and fixed in the composite during the procedure of polymerization. Thermogravimetric analysis (TGA) and vibrating sample magnetometry (VSM) indicate that the thermal stability of polystyrene/nano-Fe₃O₄ composite is improved compared to that of pure polystyrene, and the composite is a sort of superparamagnetic materials.     

On the computational power of insertion-deletion systems

Gene insertion and deletion are basic phenomena found in DNA processing or RNA editing in molecular biology. The genetic mechanism and development based on these evolutionary transformations have been formulated as a formal system with two operations of insertion and deletion, called insertion-deletion systems (Kari and Thierrin, 1996; Kari et al., 1997).We investigate the generative power of insertion-deletion systems (InsDel systems), and show that the family INS ¹ ₁ DEL ¹ ₁ is equal to the family of recursively enumerable languages. This gives a positive answer to an open problem posed in Kari et al. (1997) where it was conjectured contrary. This revised version was published online in June 2006 with corrections to the Cover Date.     

Mechanics of Reversible Deformation during Leaf Movement and Regulation of Pulvinus Development in Legumes

Plant cell deformation is a mechanical process that is driven by differences in the osmotic pressure inside and outside of the cell and is influenced by cell wall properties. Legume leaf movements result from reversible deformation of pulvinar motor cells. Reversible cell deformation is an elastic process distinct from the irreversible cell growth of developing organs. Here, we begin with a review of the basic mathematics of cell volume changes, cell wall function, and the mechanics of bending deformation at a macro scale. Next, we summarize the findings of recent molecular genetic studies of pulvinar development. We then review the mechanisms of the adaxial/abaxial patterning because pulvinar bending deformation depends on the differences in mechanical properties and physiological responses of motor cells on the adaxial versus abaxial sides of the pulvinus. Intriguingly, pulvini simultaneously encompass morphological symmetry and functional asymmetry along the adaxial/abaxial axis. This review provides an introduction to leaf movement and reversible deformation from the perspective of mechanics and molecular genetics.     

Chain stiffness and chain conformation of poly(α-methylene-γ-butyrolactone) in dilute solutions

The chain stiffness and local chain conformation of atactic poly(α-methylene-γ-butyrolactone) (PMBL), which is a side chain cyclic structural analog of poly(methyl methacrylate) (PMMA), with a weight-average molecular weight (M_w) ranging from 2.8 × 10³ to 2.6 × 10⁶ in N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) were characterized by size exclusion chromatography with a multi-angle light-scattering detector (SEC-MALS) and synchrotron radiation small-angle X-ray scattering (SAXS). Based on the Kratky-Porod worm-like chain model, the scattering functions and the M_w dependence of z-average root-mean-square radius of gyration <S²>_z^1/2 yielded the Kuhn segment lengths λ⁻¹, the diameter of the PMBL chains d, and the excluded-volume strengths in DMF and GBL. The local conformation of atactic PMBL in DMF and GBL were slightly larger than those of atactic PMMA, due to the presence of the conformationally rigid lactone ring structure.     

Developmental ability of cloned embryos from neural stem cells

The success rate is generally higher when cloning mice from embryonic stem (ES) cell nuclei than from somatic cell nuclei, suggesting that the embryonic nature or the undifferentiated state of the donor cell increases cloning efficiency. We assessed the developmental ability of cloned embryos derived from cultured neural stem cell (NSC) nuclei and compared the success rate with that of embryos cloned from other donor cells such as differentiated NSCs, cumulus cells, Sertoli cells and ES cells in the mouse. The transfer of two-cell cloned embryos derived from cultured NSC nuclei into surrogate mothers produced five live cloned mice. However, the success rate (0.5%) was higher in embryos cloned from cultured NSC nuclei than from differentiated NSCs (0%), but lower than that obtained by cloning mice from other cell nuclei (2.2-3.5%). Although the in vitro developmental potential to the two-cell stage of the cloned embryos derived from NSC nuclei (73%) was similar to that of the cloned embryos derived from other somatic cell nuclei (e.g., 85% in Sertoli cells and 75% in cumulus cells), the developmental rate to the morula-blastocyst stage was only 7%. This rate is remarkably lower than that produced from other somatic cells (e.g., 50% in Sertoli cells and 54% in cumulus cells). These results indicate that the undifferentiated state of neural cells does not enhance the cloning efficiency in mice and that the arrest point for in vitro development of cloned embryos depends on the donor cell type.