An Octagonal Shaped Monopole Antenna for UWB Applications with Band Notch Characteristics

Wireless Personal Communications - This article presents a microstrip-fed octagonal shaped monopole antenna with dual band notched characteristics for UWB applications. Partial ground plane has...     

UBET-based numerical modeling of bulk deformation processes

The paper summarizes the development of numerical procedures for modeling bulk deformation process and preform designing techniques based on the upper bound elemental technique (UBET). UBET has a unique place where an approximate, but faster solution is needed for decision making. In designing and optimizing multistage forging and profile ring-rolling processes, an approximate solution can be used to identify the most influential process parameters. Once an optimum combination of process conditions are determined, computationally intensive, but more accurate finite element analysis can be used to verify and refine results. In this paper, UBET procedures for closed-die forging and profile ring rolling are high-lighted. Experimental investigations are used to validate the model predictions. Also, the UBET-based preform design tool is presented as a process and die design tool for multistage forging processes. Application of these techniques is presented with evidence of effective material usage and extended overall die-life.     

An overhead and resource contention aware analytical model for overloaded Web servers

A Web server, when overloaded, shows a severe degradation of goodput initially, with the eventual settling of goodput as load increases further. Traditional performance models have failed to capture this behavior. In this paper, we propose an analytical model, which is a two-stage and layered queuing model of the Web server, which is able to reproduce this behavior. We do this by explicitly modelling the overhead processing, the user abandonment and retry behavior, and the contention for resources, for the FIFO and LIFO queuing disciplines. We show that LIFO provides better goodput in most overload situations. We compare our model predictions with experimental results from a test bed and find that our results match well with measurements.     

An analytic algorithm for the space–time fractional advection–dispersion equation

Fractional advection–dispersion equation (FADE) is a generalization of the classical ADE in which the first order time derivative and first and second order space derivatives are replaced by Caputo derivatives of orders 0<α?1, 0<β?1 and 1<γ?2, respectively. We use Caputo definition to avoid (i) mass balance error, (ii) hyper-singular improper integral, (iii) non-zero derivative of constant, and (iv) fractional derivative involved in the initial condition which is often ill-defined. We present an analytic algorithm to solve FADE based on homotopy analysis method (HAM) which has the advantage of controlling the region and rate of convergence of the solution series via the auxiliary parameter ? over the variational iteration method (VIM) and homotopy perturbation method (HPM). We find that the proposed method converges to the numerical/exact solution of the ADE as the fractional orders α, β, γ tend to their integral values. Numerical examples are given to illustrate the proposed algorithm. Example 5 describes the intermediate process between advection and dispersion via Caputo fractional derivative.     

OBSERVER: An Approach for Query Processing in Global Information Systems Based on Interoperation Across Pre-Existing Ontologies

There has been an explosion in the types, availability and volume of data accessible in an information system, thanks to the World Wide Web (the Web) and related inter-networking technologies. In this environment, there is a critical need to replace or complement earlier database integration approaches and current browsing and keyword-based techniques with concept-based approaches. Ontologies are increasingly becoming accepted as an important part of any concept or semantics based solution, and there is increasing realization that any viable solution will need to support multiple ontologies that may be independently developed and managed. In particular, we consider the use of concepts from pre-existing real world domain ontologies for describing the content of the underlying data repositories. The most challenging issue in this approach is that of vocabulary sharing, which involves dealing with the use of different terms or concepts to describe similar information. In this paper, we describe the architecture, design and implementation of the OBSERVER system. Brokering across the domain ontologies is enabled by representing and utilizing interontology relationships such as (but not limited to) synonyms, hyponyms and hypernyms across terms in different ontologies. User queries are rewritten by using these relationships to obtain translations across ontologies. Well established metrics like precision and recall based on the extensions underlying the concepts are used to estimate the loss of information, if any.     

Four degree of freedom liquid dispenser for direct write capillary self-assembly with sub-nanoliter precision

Capillary forces provide a ubiquitous means of organizing micro- and nanoscale structures on substrates. In order to investigate the mechanism of capillary self-assembly and to fabricate complex ordered structures, precise control of the meniscus shape is needed. We present a precision instrument that enables deposition of liquid droplets spanning from 2 nl to 300 μl, in concert with mechanical manipulation of the liquid-substrate interface with four degrees of freedom. The substrate has sub-100 nm positioning resolution in three axes of translation, and its temperature is controlled using thermoelectric modules. The capillary tip can rotate about the vertical axis while simultaneously dispensing liquid onto the substrate. Liquid is displaced using a custom bidirectional diaphragm pump, in which an elastic membrane is hydraulically actuated by a stainless steel syringe. The syringe is driven by a piezoelectric actuator, enabling nanoliter volume and rate control. A quantitative model of the liquid dispenser is verified experimentally, and suggests that compressibility in the hydraulic line deamplifies the syringe stroke, enabling sub-nanoliter resolution control of liquid displacement at the capillary tip. We use this system to contact-print water and oil droplets by mechanical manipulation of a liquid bridge between the capillary and the substrate. Finally, we study the effect of droplet volume and substrate temperature on the evaporative self-assembly of monodisperse polymer microspheres from sessile droplets, and demonstrate the formation of 3D chiral assemblies of micro-rods by rotation of the capillary tip during evaporative assembly.     

A grey approach for forecasting in a supply chain during intermittentdisruptions

The supply chains today have become vulnerable to frequent disruptions, and with continuing emphasis on efficiency, lacks robustness to deal with them. A part of the solution lies in forecasting the disruption beforehand and the other part in knowing which policies will suit such disrupted conditions best. Accurate and immediate forecasts are a must in a supply chain and hence play a huge role in stabilizing. This study compares the performance of three established forecasting methods (moving average, weighted moving average and exponential smoothing) as well as grey prediction method, during disruptions and stable situations. The experiments are performed in the form of discrete event simulation, on a four stage beer game settings. The results show that moving average and weighted moving average methods become incompetent during disruptions, and are useful only during stable times, when the demand hovers around a predefined mean value. Exponential smoothing and grey method seems to give better results during disruptions and also during stable times in upstream tiers. Grey prediction method in particular is the best method when the disruption frequency is high and also when the disruption impact is gradual rather than sudden.     

Variability in rheology of cemented paste backfill with hydration age,binder and superplasticizer dosages

The use of (CPB) material to ameliorate geotechnical stability of underground mine is in nascent stage in India. Rheological properties of CPB change with travelling time as it is transported to underground mine stope through pipeline reticulation. In this paper, rheological properties of CPB based on mill tailings of a carbonate rich mineral processing waste are evaluated for different dosages of polycarboxylate (PC) based (SP). Each CPB sample having 78?wt% solids is mixed separately with 4%, 6% or 8% of binder dosages (ratio of the weight of dry binder to the weight of dry tailings) and, 0%, 0.5%, or 1.0% of SP dosages as weight of dry binder. The paper presents a methodology for determining yield stress, plastic viscosity and thixotropic behaviour of CPB mixture as a function of hydration age, binder and SP dosages. Results from the experimental campaigns indicate that SP content has significant influence on rheological behaviour of CPB and can be suitably exploited to enhance the flow characteristics of the carbonate rich process tailings. The study also develops multivariate linear regression models of yield stress, plastic viscosity and thixotropy of CPB depending on the hydration age, binder and SP dosages.     

Effect of particle size of magnesium silicate filler on physical properties of paper

Fillers are essential component of printing papers to increase the opacity, brightness, and to improve formation and printing properties. As a very little work has been reported so far on magnesium silicate (talc), the study was conducted with the filler of different particle size for papermaking. The sheets were made in the laboratory with refined mixed hardwood chemical pulp with five grades of talc, ground calcium carbonate (GCC) and precipitated calcium carbonate (PCC) fillers with 15–24% ash level. Apparent density along with tensile, burst, tear index, Z‐direction tensile strength (ZDTS) and bending stiffness index were evaluated for talc filled sheets, and compared with GCC and PCC. Physical strength properties of talc filled sheets were decreased at a faster rate on increasing filler loading in paper and decreasing the particle size of the filler. With same type of filler its particle size determines the physical properties of paper. The postulate was not found to be valid for all the three varieties of fillers viz., talc, PCC and GCC. Shape and geometry of the PCC and GCC fillers determine the individual property. © 2012 Canadian Society for Chemical Engineering