Development of a fast neutron radiography converter using wavelength-shifting fibers

A fluorescent converter for fast neutron radiography (FNR) comprising a scintillator and hydrogen-rich resin has been developed and applied to electronic imaging. The rate of the reaction between fast neutrons and the converter is increased by thickening the converter, but its opaqueness attenuates emitted light photons before they reach its surface. To improve the luminosity of a fluorescent converter for FNR, a novel type of converter was designed in which wavelength-shifting fibers were adopted to transport radiated light to the observation end face. The performance of the converter was compared with that of a polypropylene-based fluorescent converter in an experiment conducted at the fast-neutron-source reactor YAYOI in the University of Tokyo.     

Analysis of ink flow in a mimeograph printer based on the mechanics of fluid-filled poroelastic solids

Summary To understand some main ink flow mechanisms in a mimeograph printer, the continuum mechanics theory of fluid-saturated porous solids is applied to analyze the ink flow through screens and a printing master, which are modeled by a fluid-filled poroelastic single layer. The layer is assumed to be pressed by a press roller from below and to be subjected from above to the hydrodynamic lubrication pressure induced between a printing drum and an ink roller. Nonlinear elasticity of the layer and dependence of the permeability on its deformation are taken into account. The numerical results show some important results: e.g., squeezing-out of the ink from the layer by the layer compaction by the press roller plays an important role, especially for the case where the compression duration is small in comparison with the characteristic time of the ink-filled poroelastic layer.     

Environmentally benign precipitation copolymerization of methacrylate ester and styrene to make polymeric microspheres in supercritical carbon dioxide

The polymeric microspheres were synthesized by the precipitation copolymerization of glycidyl methacrylate (GMA) with methacrylic acid(MAA) or 2‐hydoxyethyl methacrylate (2‐HEMA) containing styrene (ST) in SC‐CO₂. Scanning electron microscopy (SEM) showed that the products were spherical microparticles, with the addition of MAA and/or 2‐HEMA as the monomer, with diameter of 0.2–2 μm. The effects of copolymerization pressure, temperature, and ratios of GMA/MAA, ST, and/or GMA/2‐HEMA, on the particle size and morphology were investigated in detail. A new experiment setup is proposed for the large amount of production, based on the rule of lower monomer concentration, more stable system, and better use of the present polymerization apparatus. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2425–2431, 2007     

Effective indices to characterize short sequences of human random generations

Brain impediments such as dementia are a serious problem today. It would be very useful if software for private diagnosis were available. In this paper, we show the effectiveness of the human random generation test (HRG) for such software, and propose a set of four indices to be used for classifying the HRG data. Human-generated random numbers have strong characteristics compared to computer-generated random numbers, and these are known to be correlated to the individual characters of the subjects. However, analysis using the correlation dimension or HMM requires a long data sequence, and thus is not suitable for diagnoses. We therefore focus on short sequences of HRG and search for effective indices to detect signs of brain disability hidden in the HRG data. We studied data from subjects of different age groups, and successfully differentiated the data from the different groups. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Prospective study of "early" gastric cancer

In order to elucidate the natural history of early gastric cancer, we followed up non-concurrently certain patients who had been diagnosed endoscopically as having "early' gastric cancer and who had histological evidence of cancer by biopsy, but on whom surgical resection had been delayed or had not been conducted. At the Center for Adult Diseases, Osaka, 56 cases were eligible for this study. Out of these, 27 cases progressed to advanced cancer and 16 remained at the early stage during the follow-up period (6-88 months, mean: 29 months). The remaining 13 cases had had neither surgical resection nor examinations. The survivorship function for the duration of "early" gastric cancer was estimated by the life-table method of Kaplan and Meier. The median of the duration was estimated as 37 months. The 5-year survival rate of the 34 cases on whom surgical resection had not been conducted was estimated as 64.5%. These results suggest that early diagnosis and early treatment may lead to a reduction of mortality from stomach cancer.     

Deep Phenotyping of Superficial Epidermolytic Ichthyosis due to a Recurrent Mutation in KRT2

Superficial epidermolytic ichthyosis (SEI) is an autosomal dominant inherited ichthyosis. SEI is caused by mutations in KRT2 and frequently shows erythroderma and widespread blistering at birth. We report the clinical manifestations of two patients from a Japanese family with SEI caused by a hotspot mutation, p.Glu487Lys, in KRT2. In addition, we summarize previous reports on SEI patients with the identical mutation. One of the two patients had disease onset at the age of 7 months. The other patient’s age of onset is unknown, but it was in childhood. Neither of the two patients showed erythroderma. To perform deep phenotyping, we studied the age of onset and the frequency of erythroderma in 34 reported SEI cases with the p.Glu487Lys mutation, including the present cases. Among the cases with sufficient clinical information, 44.4% of the cases that were due to p.Glu487Lys in KRT2 occurred at birth. Erythroderma was observed in 11.1% of the cases with p.Glu487Lys in KRT2.     

Effects of polyglycerol esters of fatty acids and ethylene‐vinyl acetate co‐polymer on crystallization behavior of biodiesel

Biodiesel fuels (BDF) have many problems in the cold due to their crystallization properties. In particular, precipitation of large crystals of high‐melting fractions in BDF at low temperatures remarkably changes cold flow property of BDF and, thereby, it increases the values of cold filter plugging point. In this study, we evaluated polyglycerol esters of fatty acids (PGE) and ethylene‐vinyl acetate co‐polymer (EVA) as chemical additives to improve the cold flow property of palm oil‐based FAME (PFME). The results of solid fat content measurement indicate that the simultaneous addition of PGE and EVA showed synergistic effects on suppression of crystallization of PFME, however such effect was not observed when EVA was used alone. DSC thermograms indicated that the PGE additives not only decreased the crystallization temperature but also kinetically suppressed the crystal growth. Polarized light microscopy showed that the simultaneous addition of PGE and EVA led to the formation of considerably small and fine‐dispersed crystals of PFME. These results indicate that combined effects of PGE and EVA caused the formation of fine‐dispersed PFME crystals, which could improve the viscous properties of palm oil‐based BDF at relatively cold temperatures.     

Proposal of cause–effect pattern library for realizing sustainable businesses

Sustainable business design has gained growing interest in recent years. However, it is often difficult to clarify which business activities actually contribute to (or violate) the sustainability of the earth due to high complexity of environmental and economical system of our society. In order to help a business to generate sustainable business ideas handling this complexity in a systematic and comprehensive manner, this paper proposes a method to formulate a wide variety of causalities in our society into a cause–effect pattern library and illustrates how to use it for design and planning of sustainable businesses.     

Electrical and Thermal Conductivity and Conduction Mechanism of Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript> Alloy

Ge₂Sb₂Te₅ alloy has drawn much attention due to its application in phase-change random-access memory and potential as a thermoelectric material. Electrical and thermal conductivity are important material properties in both applications. The aim of this work is to investigate the temperature dependence of the electrical and thermal conductivity of Ge₂Sb₂Te₅ alloy and discuss the thermal conduction mechanism. The electrical resistivity and thermal conductivity of Ge₂Sb₂Te₅ alloy were measured from room temperature to 823 K by four-terminal and hot-strip method, respectively. With increasing temperature, the electrical resistivity increased while the thermal conductivity first decreased up to about 600 K then increased. The electronic component of the thermal conductivity was calculated from the Wiedemann–Franz law using the resistivity results. At room temperature, Ge₂Sb₂Te₅ alloy has large electronic thermal conductivity and low lattice thermal conductivity. Bipolar diffusion contributes more to the thermal conductivity with increasing temperature. The special crystallographic structure of Ge₂Sb₂Te₅ alloy accounts for the thermal conduction mechanism.     

Suppression of phonon‐mediated hot carrier relaxation in type‐II InAs/AlAsxSb1 − x quantum wells: a practical route to hot carrier solar cells

InAs/AlAs_xSb_{1 − x} quantum wells are investigated for their potential as hot carrier solar cells. Continuous wave power and temperature‐dependent photoluminescence indicate a transition in the dominant hot carrier relaxation process from conventional phonon‐mediated carrier relaxation below 90 K to a regime where inhibited radiative recombination dominates the hot carrier relaxation at elevated temperatures. At temperatures below 90 K, photoluminescence measurements are consistent with type‐I quantum wells that exhibit hole localization associated with alloy/interface fluctuations. At elevated temperatures, hole delocalization reveals the true type‐II band alignment, where it is observed that inhibited radiative recombination due to the spatial separation of the charge carriers dominates hot carrier relaxation. This decoupling of phonon‐mediated relaxation results in robust hot carriers at higher temperatures, even at lower excitation powers. These results indicate type‐II quantum wells offer potential as practical hot carrier systems. Copyright © 2016 John Wiley & Sons, Ltd.