A streamlined approximation and duality scheme for structural optimization

An efficient and commonly used approach to structural optimization is to solve a sequence of approximate design problems that are constructed iteratively. As is well-known, a major part of the computational burden of this scheme lies in the sensitivity analysis needed to state the approximate problems. We propose a possibility for reducing this burden by streamlining the calculations in a combined approximation and duality scheme for structural optimization. The difference between this scheme and the traditional one is that, instead of calculating all the constraint gradients to state an approximate design problem explicitly, linear combinations of these gradients are generated as they are needed during the solution of the approximate problem by the dual method. We show, by analysing some typical scenarios of problem characteristics, that this rearrangement of the calculations may be a computationally viable alternative to the traditional scheme. An advantage of streamlining the calculations is that there is no need to incorporate an active set strategy in the scheme, as is usually done, since all the design constraints may be taken into consideration without any loss of computational efficiency. This may, clearly, enhance the practical rate of convergence of the overall approximation scheme. Moreover, the proposed rearrangement of the calculations may make it computationally viable to apply iterative equation solvers to the structural analysis problem. Numerical results with direct as well as iterative equation solvers show that the streamlined scheme is a feasible and promising approach to structural optimization.     

Soluble and conductive polypyrrole copolymers containing silicone tegomers

Soluble and processable conductive copolymers of silicone tegomers and pyrrole were developed. This was easily accomplished by the oxidative polymerization of pyrrole monomer by Ce(IV) salt in the presence of silicone tegomers with hydroxyl chain ends. The resulting copolymers were soluble in dimethylformamide. The products were characterized by Fourier transform infrared, ¹H‐NMR, and four‐point probe conductivity, and their surface properties were investigated with contact‐angle measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2896–2901, 2003     

Soft handoff algorithms for CDMA cellular networks

This paper discusses the design of soft handoff algorithms for cellular communication systems. The handoff process is modeled as a hybrid system and handoff design is cast as an optimization problem based on such a model. Performance is evaluated in terms of call quality, average number of active base stations, average number of active set updates, and average amount of interference. A soft handoff algorithm, which achieves a tradeoff between these performance criteria, is obtained using principles of dynamic programming. One key feature of the algorithm is that it incorporates the effects of mobility and shadow fading in the handoff decision. Different diversity combining schemes are considered including selective combining, equal gain combining (EGC), and various optimized combining (OC) methods in the soft handoff mode. For EGC and OC, Wilkinson's and Schwartz and Yeh's methods are used to compute the statistics for the power sum of the signals. Simulation results indicate that the performance of the handoff algorithm is a function of the different combining schemes and of the different methods used to compute the statistics of the power sum. Moreover, it is observed that interference cancellation is important in order for the algorithm to be viable for cellular systems which experience interference due to using nonorthogonal multiple access.     

Use of sea water in the flotation of carbonate rich sedimentary phosphate rock

There is an appreciable amount of carbonaceous sedimentary phosphate deposits in the northern Africa and the Middle East which are expected to gain importance in the near future because of the depletion of the deposits in Florida. In many of the regions where phosphate deposits are found there is a shortage of fresh water, and sea is not very far. The use of sea water instead of fresh water in flotation of carbonaceous phosphate rock is successfully demonstrated. Thus an appreciable reduction in the operating cost and an ample amount of saving in the fresh water resources of the region is expected.     

Swelling activation energy of κ‐carrageenan in its gel state: A fluorescence study

A steady‐state fluorescence technique was employed to study the swelling of κ‐carrageenan gels at various temperatures. Pyranine was used as a fluorescence probe. The fluorescence intensity of pyranine was measured during the insitu swelling process of κ‐carrageenan gels. The fluorescence intensity increased exponentially as the swelling time increased. The increase in the fluorescence intensity was modeled with the Li–Tanaka equation, from which the swelling time constants and cooperative diffusion coefficients were determined. The swelling time constants decreased and the cooperative diffusion coefficients increased as the swelling temperature was increased. The swelling activation energies were measured to be 47.05 kJ/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Automatic detection of learning styles for an e-learning system

A desirable characteristic for an e-learning system is to provide the learner the most appropriate information based on his requirements and preferences. This can be achieved by capturing and utilizing the learner model. Learner models can be extracted based on personality factors like learning styles, behavioral factors like user’s browsing history and knowledge factors like user’s prior knowledge. In this paper, we address the problem of extracting the learner model based on Felder–Silverman learning style model. The target learners in this problem are the ones studying basic science. Using NBTree classification algorithm in conjunction with Binary Relevance classifier, the learners are classified based on their interests. Then, learners’ learning styles are detected using these classification results. Experimental results are also conducted to evaluate the performance of the proposed automated learner modeling approach. The results show that the match ratio between the obtained learner’s learning style using the proposed learner model and those obtained by the questionnaires traditionally used for learning style assessment is consistent for most of the dimensions of Felder–Silverman learning style.     

Equilibrium distributions of key components of spearmint oil in sub/supercritical carbon dioxide

Effects of temperature (at 35, 45 or 55°C) and pressure (10–110 atm) on the relative distribution coefficients of the twelve key components of spearmint oil (essential oil ofMentha cardiaca; Scotch spearmint) at equilibrium in dense CO₂ were investigated under conditions ranging from subcritical to supercritical regions. Effects of vapor pressure, molecular weight and polarity of the key components on their equilibrium distributions in sub/supercritical CO₂ are discussed. At 35°C, all key components of spearmint oil are equally soluble in dense CO₂ within the 12–102 atm pressure region. At 45 and 55°C, the key components are equally soluble for pressures greater than about 60 atm. However, around either 45°C/27 atm or 55°C/35 atm conditions, the relative distribution coefficients of all monoterpene hydrocarbons and of isomenthone (an oxygenated monoterpene) exhibit maxima, which are due to significantly higher vapor pressures of these components and significantly lower solvating power of the dense-gas solvent at these particular temperatures and pressures. Vapor-pressure effects, coupled with the decrease in solvating power, dominate the effects of polarity and molecular mass of the key components. Deterpenation of spearmint oil with dense CO₂ is possible around either 45°C/27 atm or 55°C/35 atm, where the monoterpene hydrocarbons tend to concentrate in the CO₂-rich phase.     

Compression testing of a sintered Ti6Al4V powder compact for biomedical applications

In this study, the compression deformation behavior of a Ti6Al4V powder compact, prepared by the sintering of cold compacted atomized spherical particles (100–200 μm) and containing 36–38% porosity, was investigated at quasi-static (1.6×10⁻³–1.6×10⁻¹ s⁻¹) and high strain rates (300 and 900 s⁻¹) using, respectively, conventional mechanical testing and Split Hopkinson Pressure Bar techniques. Microscopic studies of as-received powder and sintered powder compact showed that sintering at high temperature (1200 °C) and subsequent slow rate of cooling in the furnace changed the microstructure of powder from the acicular alpha () to the Widmanstätten (+β) microstructure. In compression testing, at both quasi-static and high strain rates, the compact failed via shear bands formed along the diagonal axis, 45° to the loading direction. Increasing the strain rate was found to increase both the flow stress and compressive strength of the compact but it did not affect the critical strain for shear localization. Microscopic analyses of failed samples and deformed but not failed samples of the compact further showed that fracture occurred in a ductile (dimpled) mode consisting of void initiation and growth in phase and/or at the /β interface and macrocracking by void coalescence in the interparticle bond region.     

Coherent precipitation in a high-temperature Cr–Ni–Al–Ti Alloy

Chromium alloys present a potential for development of new high-temperature materials. Precipitation characteristics of a Cr–5Ni–5Al–0.5Ti (at.%) alloy were investigated utilizing a series of heat treatments. XRD, SEM, and analytical TEM were used to characterize the microstructure. This study has shown that the small spherical B2-NiAl precipitates forming below 1345 °C are highly coherent and have a well-defined orientation relationship with the Cr-matrix. Also, some evidence has been presented for the formation of L2₁-Ni₂AlTi phase within the B2-NiAl phase.