Determination of Electrical and Photoelectrical Properties of Schottky Diodes Made Using New Chitin Derivatives Synthesized as Interface Layer

Silicon - 5-(2,4-dichlorophenyl)-2-furoic acid and anthraquinone-2-carboxylic acid were reacted separately with chitin. The synthesized products were characterized by various spectroscopic methods...     

Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

Endogenous and copper-induced lipid peroxidation and antioxidant activity of serum in hypercholesterolemic subjects

In order to observe the transport ability of peritoneum to small molecular substances, peritoneal equilibration test (PET) was performed in 52 CAPD patients. By analysing the relationship between peritoneal transport function and dialysis adequacy, we found the average urea KT/V and Cr were significantly lower in high and low transport groups (n = 6 and n = 2) than in high average and low average groups (n = 35 and n = 9). According to the results of PET, we adjusted the dialysis program of 11 patients and the dialysis adequacy was markedly improved. We concluded that PET was helpful for selecting and adjusting CAPD program, and discussed some questions which should be payed more attention in PET operation.     

Robust autoregressive predictive power control method for mobile CDMA systems

A closed-loop power control (CLPC) scheme with a multistep (indicating multiple prediction steps) linear autoregressive predictor is presented. The proposed CLPC relies on low-rate sample vector based autoregressive prediction. Compared to currently available predictive CLCP schemes, it demonstrates particularly robust performance in the presence of large loop delays and channel estimation errors.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Lipid peroxides, glutathione, gamma-glutamylcysteine synthetase and gamma-glutamyltranspeptidase activities in several tissues of rats following water-immersion stress

The effects of water-immersion restraint (WIR) stress on lipid peroxide, glutathione (GSH), glutathione peroxidase (GSH-Px), gamma-glutamylcysteine synthetase (gamma-GCS) and gamma-glutamyltranspeptidase (gamma-GT) activities in several tissues of rats were investigated. Hepatic and intestinal lipid peroxide levels were increased significantly in the WIR stress group. In both tissues, GSH levels were significantly decreased and gamma-GCS activity was significantly increased. In addition, gamma-GT activities remained unchanged in both tissues following WIR stress. However, lipid peroxide and GSH levels did not change in the stomach and brain in the WIR stress group compared to the control group. These results suggest that lipid peroxidation, but not the depression of GSH synthesis and/or the increase of GSH breakdown may be a factor in hepatic and intestinal GSH reduction following WIR stress.     

An investigation of some Schiff bases as corrosion inhibitors for austenitic chromium–nickel steel in H2SO4

The corrosion inhibition of austenitic chromium–nickel steel by two Schiff bases, N-(1-toluidine)salicylaldimine and N-(2-hydroxyphenyl)salicylaldimine, was investigated in sulphuric acid medium. The effect of concentration and temperature on inhibition properties was determined. It was found that when the concentrations of inhibitor were increased the inhibition efficiencies () and surface coverage () increased. Some thermodynamic parameters such as free energy of adsorption, G _ads, and enthalpy, H, were determined for the Schiff bases. Experimental results agree with the Temkin isotherm for N-(1-toluidine)salicylaldimine, but the Langmuir isotherm is more appropriate for N-(2-hydroxyphenyl)salicylaldimine.     

Effects of dowels produced from various materials on withdrawal strength in MDF and Pb

Wood dowels are commonly used in the construction furniture, but little information is available about the additive effects of dowels on the ultimate withdrawal strength of single or multidowel joints. This study was carried out to determine the tensile strength of 10‐mm‐diameter dowels produced from medium‐density fiberboard (MDF), plywood, scotch pine (Pinus sylvestris L.), and beech (Fagus orientalis lipsky), bonded parallel and vertical to the surface of MDF and particleboard (Pb) with poly(vinyl acetate) (PVAc) and Desmodur‐VTKA (D‐VTKA). Tensile strength was applied to the dowels according to the procedure in the ASTM‐D 1037 standard. The effects of dowel species, direction of tensile, composite material, and type of adhesive on tensile strength were determined. The results showed that the highest tensile strength was obtained in beech dowels bonded vertically with PVAc adhesive to the surface of MDF at 7.91 N/mm². If the dowels used in furniture production are subjected to great tensile strength, beech dowels bonded with PVAc adhesive on MDF should be used. However, when dowels produced from MDF and plywood waste are used, they also can produce positive results. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 531–535, 2003     

HYDRODYNAMIC STUDIES IN A HALF SLOT-RECTANGULAR SPOUTED BED COLUMN

Experiments were carried out in a half slot-rectangular spouted bed to investigate the effects of slot width and lower section basal angle on column hydrodynamics. Flow regimes, minimum spouting velocity, spouting and maximum pressure drops, and maximum spoutable bed height were determined for 4 mm diameter polyethylene particles. The results are compared with those for conventional cylindrical and rectangular spouted beds. Correlations for each hydrodynamic parameter are developed and compared with equations available in the literature.     

Chemical,thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

Polyethylene terephthalate (PET)/nano-hydroxyapatite (nHAp) composite granules were obtained using twin-screw extruder. Preforms were prepared by injection molding and then PET/nHAp bottles were produced by blow molding. For PET bottles with nHAp, the migration amounts of carboxylic acid (COOH), acetaldehyde (AA), diethylene glycol (DEG), and isophthalic acid (IPA); glass transition temperature (T_g); melting temperature (T_m); and the maximum crystallization temperature (T_cry) were measured. The load-carrying capacity, burst strength, stress cracking, and regional material distribution tests were carried out on the bottles. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and ultraviolet transmittance analyses were conducted to explain the changes in mechanical, chemical, physical properties, and light transmission of bottles. It was found out that the COOH amount increased and the AA content decreased with increasing nHAp amount. On the other hand, no change was observed in the amounts of DEG and IPA. Although the mechanical properties such as load-carrying capacity and burst strength of the bottles have improved, it has been determined that the standard environmental stress crack resistance test procedure cannot be applied to such a composite. Experimental findings indicate that nHAp disrupts the chemical structure of PET and it isolates harmful chemicals such as AA by forming intermolecular bonds. Moreover, with the addition of up to 0.8% nHAp, PET bottles block the light transmission approximately 80% within 400–700 nm wave length zone. The study demonstrates that the PET/nHAp composite bottles can be used in the food industry, particularly in the packaging of milk and milk products which are vulnerable to light exposure.