ORDERING FUZZY SETS BY CONSENSUS CONCEPT AND FUZZY RELATION EQUATIONS

A general class of consensus measures of fuzzy sets is introduced in this paper. It is shown that, while the consensus measures are valuations but neither isotone nor antitone with respect to the lattice structure induced by the pointwise maximum and minimum operations to the set of all the fuzzy sets on a nonempty crisp set, they are antitone valuations with respect to the lattice structure induced by the generalized sharpening relation to a quotient set of the set of fuzzy sets. It is also shown that the solutions of a finite fuzzy relation equation that have the maximum consensus measure can be characterized through the join operation of the latter lattice in terms of the maximum solution and some of the minimal solutions of the equation.     

Planning tool requirements for flexible manufacturing: an analytical approach

The problem of tool and fixture resources dimensioning is considered and examined for a productive environment with flexible features. With reference to previous studies, different tool management strategies are pointed out and commented upon; a further control policy based on workpiece batching is suggested and tested. In the second section of the paper, an analytical interpretation of the question in hand is presented and discussed; the effectiveness of the procedure itself is tested by comparing analytical data with results derived from the detailed simulation of a real tool management area. Results are shown in the last section     

ARTIFICIAL INTELLIGENCE GOES MOBILE

New mobile computing technologies require new paradigms for infrastructure and interaction with mobile and networked devices. For building smart mobile companions for new intelligent services, a number of challenges have to be addressed. We argue that artificial intelligence is a key to a new generation of mobile systems. In this introduction to AI in mobile systems, we present some of the challenges and solutions in this exciting field of research.     

Fatty acid profile of milk from goats fed diets with different levels of conserved and fresh forages

Aim of the study was to evaluate the effect of different proportions of hay and fresh grass in goats’ diet on milk fatty acid profile. Nine Camosciata goats were fed a fixed amount of concentrate (30% of total diet) and different percentages (40% vs 30%, 50% vs 20% and 60% vs 10%) of hay and fresh grass, respectively. Diminishing amounts of fresh grass percentages in the diet led to significant increases of lauric, myristic and palmitic acids (P ≤ 0.001) and to significant decreases of C18:1 t6‐11, rumenic and α‐linolenic acids (P ≤ 0.001) in milk, thus determining a worsening of the health value of milk fat.     

AN EXPERT SYSTEM FOR ACADEMIC COUNSELING

In recent years, high enrollment has greatly increased the counseling loads of academic advisors at American colleges and universities. Expert systems can assist academic counselors by solving a relatively easy class of problems which deal with the most encountered cases. In this paper, a prototype expert system, CLASS COUNSELOR, is presented. CLASS COUNSELOR recommends a set of courses after an interactive session with the student. It handles the upper division courses of the undergraduate program in the Department of Electrical Engineering, University of Florida. The program runs on IBM-AT personal computers and compatibles.     

A multi-year composite of GVI data as a clear reflectance database

A method is developed to generate a top of the atmosphere clear reflectance from the Global Vegetation Index (GVI) product. Our goal is to use this dataset as a threshold to be applied to the forthcoming POLDER observations, for operational cloud detection. The method is based on the hypothesis that clouds add a high frequency signal to the slow variations of the surface reflectance in clear conditions. The validity of our algorithm is verified through an analysis of the temporal profile of the reflectance that it generates. We show that these profiles are better than those resulting from the simpler Maximum Value Composite (MVC) method. The method is applied to five years of GVI products and the results are used to derive a reference database which accounts for the interannual variability of the surface reflectance.     

Evidence of multimicrometric coherent γ′ precipitates in a hot‐forged γ–γ′ nickel‐based superalloy

This paper demonstrates the existence of large γ’ precipitates (several micrometres in diameter) that are coherent with their surrounding matrix grain in a commercial γ–γ’ nickel‐based superalloy. The use of combined energy dispersive X‐ray spectrometry and electron backscattered diffraction (EBSD) analyses allowed for revealing that surprising feature, which was then confirmed by transmission electron microscopy (TEM). Coherency for such large second‐phase particles is supported by a very low crystal lattice misfit between the two phases, which was confirmed thanks to X‐ray diffractograms and TEM selected area electron diffraction patterns. Dynamic recrystallization of polycrystalline γ–γ’ nickel‐based superalloys has been extensively studied in terms of mechanisms and kinetics. As in many materials with low stacking fault energy, under forging conditions, the main softening mechanism is discontinuous dynamic recrystallization. This mechanism occurs with preferential nucleation on the grain boundaries of the deformed matrix. The latter is then being consumed by the growth of the newly formed grains of low energy and by nucleation that keeps generating new grains. In the case of sub‐solvus forging, large γ’ particles usually pin the migrating boundaries and thus limit grain growth to a size which is determined by the distribution of second‐phase particles, in good agreement with the Smith–Zener model. Under particular circumstances, the driving force associated with the difference in stored energy between the growing grains and the matrix can be large enough that the pinning forces can be overcome, and some grains can then reach much larger grain sizes. In the latter exceptional case, some intragranular primary γ’ particles can be observed, although they are almost exclusively located on grain boundaries and triple junctions otherwise. In both cases, primary precipitates have no special orientation relationship with the surrounding matrix grain(s). This paper demonstrates the existence of high fractions of large γ’ precipitate (several micrometres in diameter) that are coherent with their surrounding matrix grain, in a commercial γ–γ’ nickel‐based superalloy. Such a configuration is very surprising, because there is apparently no reason for the coherency of such particles.     

A new HPF specimen carrier adapter for the use of high‐pressure freezing with cryoscanning electron microscope: two applications: stearic acid organization in a hydroxypropyl methylcellulose matrix and mice myocardium

Cryogenic transmission electron microscopy of high‐pressure freezing (HPF) samples is a well‐established technique for the analysis of liquid containing specimens. This technique enables observation without removing water or other volatile components. The HPF technique is less used in scanning electron microscopy (SEM) due to the lack of a suitable HPF specimen carrier adapter. The traditional SEM cryotransfer system (PP3000T Quorum Laughton, East Sussex, UK; Alto Gatan, Pleasanton, CA, USA) usually uses nitrogen slush. Unfortunately, and unlike HPF, nitrogen slush produces water crystal artefacts. So, we propose a new HPF specimen carrier adapter for sample transfer from HPF system to cryogenic‐scanning electronic microscope (Cryo‐SEM). The new transfer system is validated using technical two applications, a stearic acid in hydroxypropyl methylcellulose solution and mice myocardium. Preservation of samples is suitable in both cases. Cryo‐SEM examination of HPF samples enables a good correlation between acid stearic liquid concentration and acid stearic occupation surface (only for homogeneous solution). For biological samples as myocardium, cytoplasmic structures of cardiomyocyte are easily recognized with adequate preservation of organelle contacts and inner cell organization. We expect this new HPF specimen carrier adapter would enable more SEM‐studies using HPF.     

Advanced spinning disk‐TIRF microscopy for faster imaging of the cell interior and the plasma membrane

Understanding the cellular processes that occur between the cytosol and the plasma membrane is an important task for biological research. Till now, however, it was not possible to combine fast and high‐resolution imaging of both the isolated plasma membrane and the surrounding intracellular volume. Here, we demonstrate the combination of fast high‐resolution spinning disk (SD) and total internal reflection fluorescence (TIRF) microscopy for specific imaging of the plasma membrane. A customised SD‐TIRF microscope was used with specific design of the light paths that allowed, for the first time, live SD‐TIRF experiments at high acquisition rates. A series of experiments is shown to demonstrate the feasibility and performance of our setup.     

Evaluation of calibration methods for a helicopter-borne microwave scatterometer

The French frequency modulated continuous waves (FMCW) scatterometer ERASME mounted on small helicopter or aircraft has been designed as dualfrequency (C and X bands) and dualpolarization (HH, VV) to investigate simultaneously the vegetation and the soil responses in radar backscattering. It is operated as a forward looking radar with a large elevation beamwidth (± 10° at 3 db) to observe easily the same surface target over a large range of incidence angles during a single flight. By this ability, ERASME is a complementary research tool for intercalibration of airborne and spaceborne imaging Synthetic Aperture Radars like Radarsat and ASAR and has to be well calibrated in every configuration, both absolutely and relatively for comparisons at different incidence angles.

This paper evaluates different calibration methods to be applied to such an instrument. Absolute calibration within 1 dB is easily obtained by external calibration using metallic corner reflectors. But this method remains insufficient to get the antenna elevation aperture which is essential on natural distributed targets for antenna pattern correction, due to the severe constraint of a narrow azimuthal beam and flight parameters (pitch, roll, altitude) varying quickly in time and range.

The external calibration is strongly improved by using a statistical analysis of data obtained over natural targets which analyses the correlation between the processed data and the recorded flight parameters. This method appears promising, but its application on natural targets with random variations need specific statistical properties of the data set. It is operative for high antenna setting (here 38° incidence angle) and mostly over bare soils, with low of σ⁰ variances and σ² correlation length of the order of the correlation length of pitch. It provides the aperture range around the antenna axis and an accuracy of 0.5 dB upon erσ⁰ is achieved providing the antenna pattern correction are done.