The novelty of this paper is the use of an efficient beam theory for bending, free vibration and buckling analysis of functionally graded material (FGM) beams on two-parameter elastic foundation. The present theory accounts for both shear deformation and thickness stretching effects by a parabolic variation of all displacements across the thickness, and satisfies the stress-free boundary conditions on the upper and lower surfaces of the beam without requiring any shear correction factor. Due to porosities, possibly occurring inside FGMs during fabrication, it is therefore necessary to consider the vibration, bending and buckling behaviors of beams having porosities in this work. The equation of motion for FGM beams is obtained through Hamilton’s principle. The closed form solutions are obtained by using Navier technique, and then fundamental frequencies are found by solving the results of eigenvalue problems. The validity of the present theory is investigated by comparing some of the present in literature. It can be concluded that the proposed theory is accurate and simple in solving the bending, free vibration and buckling behaviors of FGM sandwich beams. 相似文献
This short paper reports a simple method to image low density lipoproteins (LDL) using atomic force microscopy (AFM). This instrument allows imaging of biological samples in liquid and presents the advantage of needing no sample preparation such as staining or fixation that may affect their general structure. Dimensions (diameter and height) of individual LDL particles were successfully measured. AFM imaging revealed that LDL have a quasi-spherical structure on the x and y axis with an oblate spheroid structure in the z axis (i.e., height). LDLs were found to have an average diameter of 23 +/- 3 nm. The obtained mean height was 10 +/- 2 nm. 相似文献
In this paper we present a new application for a four variable refined plate theory to analyse the nonlinear cylindrical bending behavior of functionally graded plates subjected to thermomechanical loadings. This recent theory is based on the assumption that the transverse displacements consist of bending and shear components in which the bending components do not contribute toward shear forces and, likewise, the shear components do not contribute toward bending moments. The theory accounts for a quadratic variation of the transverse shear strains across the thickness, and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The material properties are assumed to vary continuously through the thickness of the plate according to a power-law distribution of the volume fraction of the constituents. The non-linear strain-displacement relations in the von Karman sense are used to study the effect of geometric non-linearity. The solutions are achieved by minimizing the total potential energy and the results are compared to the classical and the first-order theories reported in the literature. It can be concluded that the proposed theory is accurate and simple in solving the nonlinear cylindrical bending behavior of functionally graded plates. 相似文献
This paper deals with knowledge sharing over Internet. After defining the concept, we will discuss work aimed at creating a technical system to implement it and at measuring the quality of results obtained. However, the reader will quickly see that the text is organized to address the theme of this special issue of Scientometrics. Models, methods and measures characterize scientometric research. What problems arise in attempting to develop them for Internet? In order to answer this question, it is important to distinguish between two schools of practice in the scientometric research field: the first derives from applied statistics and is called bibliometrics; the second derives from cognitive sociology and is called infometrics (Turner, 1994).
During the geological disposal of high-level waste, the nuclear glass is expected to be first hydrated in water vapor prior to liquid alteration. In the present work, we investigated the vapor hydration of the International simple glass (ISG) at 175°C and different relative humidities (60%, 80% and 98%). The glass hydration was investigated by nuclear reaction analysis (NRA) and Fourier transform infra-red spectroscopy. The chemical and mineralogical compositions of the alteration products were studied using scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM-EDS) and μ-Raman spectroscopy, respectively. The NRA results gave water diffusion coefficients of 2.31–7.34 × 10−21 m2/s, in good agreement with the literature data on borosilicate glasses altered in aqueous media. The glass hydration increased with relative humidity percentage and the SEM-EDS analysis showed a slight enrichment in Si and loss of Na in the hydrated glass layer compared with the pristine glass. The hydration rate of the ISG glass was little higher than that of the French SON68 glass hydrated using water vapor. The corrosion products were analcime, tobermorite, and calcite, which were typical of the SON68 glass hydrated in similar conditions. 相似文献
In this research, a mathematical derivation is made to develop a nonlinear dynamic model for the nonlinear frequency and chaotic responses of the multi-scale hybrid nano-composite reinforced disk in the thermal environment and subject to a harmonic external load. Using Hamilton’s principle and the von Karman nonlinear theory, the nonlinear governing equation is derived. For developing an accurate solution approach, generalized differential quadrature method (GDQM) and perturbation approach (PA) are finally employed. Various geometrically parameters are taken into account to investigate the chaotic motion of the viscoelastic disk subject to harmonic excitation. The fundamental and golden results of this paper could be that in the lower value of the external harmonic force, different FG patterns do not have any effects on the motion response of the structure. But, for the higher value of external harmonic force and all FG patterns, the chaos motion could be seen and for the FG-X pattern, the chaosity is more significant than other patterns of the FG. As a practical designing tip, it is recommended to choose plates with lower thickness relative to the outer radius to achieve better vibration performance.
The aim of the present work was to evaluate the contamination of some samples, taken from Moroccan wheat grains, by ochratoxin A (OTA), deoxynivalenol (DON) and the associated toxigenic fungi. Moreover, we focused on the influence of environmental factors on both the growth and OTA production by three strains of Aspergillus. The results showed that only few samples were contaminated by the two mycotoxins (2 samples for OTA and 7 for DON). The main isolated fungi belong to the Aspergillus, Penicillium and Fusarium genus; 74 Aspergillus and 28 Penicillium isolates were tested for their ability to produce OTA. Only 2 A. alliaceus and 14 A. niger were able to synthesize OTA. However, none of Penicillium isolates can produce this toxin under the conditions mentioned. In respect of the effects of the temperature and water activity (aw), the optimal conditions for the growth and OTA production were different. While the optimal conditions of growth for A. alliaceus and A. terreus are 30 degrees C and 0.98 aw, A. niger preferred 0.93-0.95 aw at 25 degrees C, whereas the optimal production of OTA was observed at 30 degrees C for both A. alliaceus and A. niger at 0.93 and 0.99 aw, respectively. 相似文献
The doubly fed induction generator (DFIG) is generally used in the production of the electric energy and more specifically in wind turbines. Currently, a problem of electrical machine control and especially for wind turbines is the change of internal parameters of the machine, which greatly deteriorates the control. In addition, for stand-alone applications, the load and wind speed change frequently. In this paper, a robust control strategy based on the H∞ control theory is developed for the independent control of the stator voltage amplitude and frequency of a stand-alone DFIG. The DFIG is fed through the rotor windings by a voltage inverter controlled by Space Vector Modulation (SVM). A capacitive and inductive filter is introduced to reduce harmonics on stator voltages and rotor currents. The robust control strategy rejects all the disturbances that may affect the system and that result from the variations of machine parameters, of the rotor speed and of the load. Experimental tests are carried out to verify the effectiveness of the robust control through a comparison with the classical PI regulator in the framework of the Field Oriented Control (FOC) strategy of the DFIG. 相似文献