Polymer aqueous solutions as quenching media. II. Ethylene oxide–propylene oxide copolymers

The cooling power of aqueous solutions of ethylene oxide-propylene oxide copolymers are studied with a silver standard sample by using two apparatuses quench with injection and quench with agitation. For temperature T>400°C, the viscosity plays the predominant role; for T<400°C, the cooling is controlled by the polymer precipitation and the cooling rate decreases by lowering the cloud point of the polymer solution. This work demonstrates the possibility of adjusting the cooling curves by taking into account the thermodynamical properties of the polymer.     

Synthesis and photovoltaic properties of mono-substituted quaterthiophenes bearing strong electron-withdrawing group

We report here on the synthesis and properties of a monosubstituted quaterthiophene derivative asymmetrically functionalized by an electron-withdrawing group using the palladium-catalyzed Stille's coupling reaction. The UV–vis absorption spectrum evidences a strong intramolecular charge transfer transition. Thus oligothiophenes act as electron donors and substituent group as acceptor. The diodes in which monosubstituted quaterthiophenes behave as organic semiconductors, exhibit a rectifying behavior. Photovoltaic measurements show moderate power conversion efficiency.     

Nonlocal PDE morphology: a generalized shock operator on graph

This paper presents an adaptation and extension of the shock filters on weighted graphs using the formalism of partial difference equations. This adaptation leads to new morphological operators that alternate between nonlocal dilation and nonlocal erosion filter type on graphs. Furthermore, this adaptation extends the shock filter applications to any data that can be represented by graphs. This approach is illustrated through image, data defined on region maps, and 3D point cloud processing.     

Influence of the layer parameters on the performance of the CdTe solar cells

Influence of the layer parameters on the performances of the CdTe solar cells is analyzed by SCAPS-1D. The ZnO:Al film shows a high efficiency than SnO2:F. Moreover, the thinner window layer and lower defect density of CdS films are the factor in the enhancement of the short-circuit current density. As well, to increase the open-circuit voltage, the responsible factors are low defect density of the absorbing layer CdTe and high metal work function. For the low cost of cell production, ultrathin film CdTe cells are used with a back surface field (BSF) between CdTe and back contact, such as PbTe. Further, the simulation results show that the conversion efficiency of 19.28% can be obtained for the cell with 1-μm-thick CdTe, 0.1-μm-thick PbTe and 30-nm-thick CdS.     

Cooperative localization techniques for wireless sensor networks: free,signal and angle based techniques

This paper addresses the problem of localization in sensor networks where, initially, a certain number of sensors are aware of their positions (either by using GPS or by being hand‐placed) and are referred to as anchors. Our goal is to localize all sensors with high accuracy, while using a limited number of anchors. Sensors can be equipped with different technologies for signal and angle measurements. These measures can be altered by some errors because of the network environment that induces position inaccuracies. In this paper, we propose a family (AT‐Family) of three new distributed localization techniques in wireless sensor networks: free‐measurement (AT‐Free) where sensors have no capability of measure, signal‐measurement (AT‐Dist) where sensors can calculate distances, and angle‐measurement (AT‐Angle) where sensors can calculate angles. These methods determine the position of each sensor while indicating the accuracy of its position. They have two important properties: first, a sensor node can deduce if its estimated position is close to its real position and contribute to the positioning of others nodes; second, a sensor can eliminate wrong information received about its position. This last property allows to manage measure errors that are the main drawback of measure‐based methods such as AT‐Dist and AT‐Angle techniques. By varying the density and the error rate, simulations show that the three proposed techniques achieve good performances in term of high accuracy of localized nodes and less energy consuming while assuming presence of measure errors and considering low number of anchors. Copyright © 2012 John Wiley & Sons, Ltd.     

Fiber optic applications of multiple quantum well electroabsorption modulators

Electroabsorption modulators (eam) have proved to be very attractive both as optical sources (monolithically integrated NRZ transmitters andrz pulse generators) as well as for very fast signal processing (demultiplexing, regeneration, wavelength conversion,...). Their design criteria, technology and implementation in future networks are reviewed, and the main issues are discussed.     

Experimental investigation of a new type of interfacial instability in a reactive coextrusion process

This paper deals with the study of new interfacial instabilities, called “grainy” defects, in coextrusion process of reactive multilayer polymers. The main objective was to better understand this phenomenon since no help can be found in the literature. The fundamental approach from a micro‐scale to a macro‐scale involves the study of relationships between polymer structure, processing, and interfacial properties. The influence of these parameters on the generation of “grainy” defects during coextrusion has been assessed in correlation with physicochemical properties. Through this work, rheological properties and the interfacial morphology between tie and barrier layers have been investigated by shear stress relaxation experiments and transmission electronic microscopy, respectively. Depending on the reactive polymers, the interfacial coupling was found to significantly alter the stress relaxation behavior by extending the relaxation time and generating an interfacial roughness. Hence, relations between the copolymer architecture, the relaxation process, and the interfacial morphology were established in correlation with the generation of grainy defects in coextrusion process. POLYM. ENG. SCI., 55:2542–2552, 2015. © 2015 Society of Plastics Engineers     

Effect of the type of superplasticizer on the properties of cementitious systems incorporating slag

Superplasticizers have become an integral ingredient in the formulation of concretes. After 40?years, their use and dosage remain uncertain due to variations in their compositions and those of cement. In addition, the substitution of cement by supplementary cementitious materials having different chemical compositions exacerbates the problem without counting the multiplicity of superplasticizers to choose from. The present work consists of a study of the rheological and mechanical properties of cementitious systems containing slag and various types of superplasticizers. The tests were carried out on pastes, mortars and concretes incorporating slag in partial cement replacement and four superplasticizers types, polynaphthalene sulphonate (PNS) and three polycarboxylates (PC). The results of this study demonstrate that the viscosity and the yield stress increase with the rate of incorporation of the slag. The air increases with the polycarboxylates but this effect is less perceptible in the presence of the slag. Polycarboxylates improve workability more than PNS. The use of polycarboxylates reduces the viscosity and the yield stress. The compressive strength of concretes containing slag is low at early age but high at long run. They exhibit good resistances to scaling. The permeability to chloride ions is considerably reduced in the presence of the slag independently of the type of superplasticizer, suggesting good durability of these concretes in potentially aggressive external environments.