Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

A stochastic maximum principle for systems with jumps, with applications to finance

We consider a stochastic control problem with linear dynamics with jumps, convex cost criterion, and convex state constraint, in which the control enters the drift, the diffusion, and the jump coefficients. We allow these coefficients to be random, and do not impose any L^p-bounds on the control.

We obtain a stochastic maximum principle for this model that provides both necessary and sufficient conditions of optimality. This is the first version of the stochastic maximum principle that covers the consumption–investment problem in which there are jumps in the price system.     

The risk of seroconversion in surgeons of the hepatitis B, hepatitis C and human immunodeficiency viruses (in a specific surgical population)

The prevalence of hepatitis B surface antigen (HBs Ag) and antibody to hepatitis C virus (HCV) and human immunodeficiency virus (HIV) was determined in the serum specimens of 288 patients treated surgically in the orthopaedic department of an urban public teaching hospital. The cumulative risk of HBV, HCV and HIV seroconversion for an orthopaedic surgeon during the surgical career span was calculated. We found that 1.4%, 3.1% and 1.7% of patients were seropositive for HBsAg, HCV antibody and HIV antibody, respectively. Seropositivity was neither associated with age nor with trauma, whereas male patients had a greater likelihood of seropositivity. Risk factor assessment did not prove to be discriminating in identifying which patients may pose a potential exposure risk. This study supports the concept of universal infection control precautions for orthopaedic surgeons regardless of the patients' risk factor or serologic status.     

Testing of the multi-application small light water reactor (MASLWR) passive safety systems

Experimental thermal hydraulic research has been conducted at Oregon State University for the purpose of assessing the performance of a new reactor design concept, the multi-application small light water reactor (MASLWR). The MASLWR is a pressurized light water reactor design with a net output of 35 MWe that uses natural circulation in both normal and transient operation. Due to its small size, portability and modularity, the MASLWR design is well suited to help fill the potential need for grid appropriate reactor designs for smaller electricity grids as may be found in developing or remote regions. The purpose of the OSU MASLWR test facility is to assess the operation of the MASLWR under normal full operating pressure and full temperature conditions and to assess the passive safety systems under transient conditions. The data generated by the testing program will be used to assess computer code calculations and to provide a better understanding of the thermal-hydraulic phenomena in the design of the MASLWR NSSS. During this testing program, four tests were conducted at the OSU MASLWR test facility. These tests included one design basis accident and one beyond design basis accident. During the performance of these tests, plant operations to include start up, normal operation and shut down evolutions were demonstrated successfully.     

Does Physiological Blood Glucose Control Require an Adaptive Control Strategy?

To test the hypothesis that only an adaptive algorithm would guarantee optimal feedback control of glycemia in insulin-dependent diabetes, fasting chronically diabetic dogs at rest were subjected to short-term artificial beta cell treatment. Insulin was applied intravenously and an oral glucose load was given during the experiment. Employing the same dosing algorithm, three different control strategies were employed in a random order on different days: adaptive control (minimum variance controller, Test A), fixed command control using on-line parameter estimates (Test B), and fixed command control using off-line individually optimized dosage constants (Test C). Comparison was made to nondiabetic control animals. The glycemic profiles were entirely normal in Test A and C, but were distinctly elevated in Test B. The peripheral hyperinsulinaemia could, however, not be avoided by adaptive control. It is concluded that the restoration of physiological blood glucose control in insulin-dependent diabetes requires dosage parameters which are either continually adapted to the actual situation (adaptive control) or are optimized to meet the individual's needs. In the latter case, fixed command control may be employed. Peripheral hyperinsulinaemia cannot be avoided as long as insulin is administered by a posthepatic route.     

Isolation of single yeast cells by optical trapping

Individual yeast cells can be successfully isolated and recultured on plates with a new isolation method making use of optical trapping with infrared laser light. The cells can be selected on morphological criteria by high resolution microscopy. The isolation device is constructed from two coverslips separated by spacers, in which selected cells are transferred to a plastic capillary, using the optical trap. To test the procedure, selection experiments were done with a mixture of two Saccharomyces cerevisiae strains, distinguishable both in fluorescence microscopy and on agar plates. These experiments showed that only selected cells were isolated, and close to 100% of the isolated stationary-phase cells formed colonies on agar plates, indicating a high recovery. A lower recovery was obtained with exponential-phase cells, possibly because of a higher sensitivity to laser irradiation. Applications for this method may include the isolation of mutants with altered morphology and the isolation of subpopulations of yeast cultures, for their separate investigation or for the initiation of pure cultures.     

Stress concentration and fatigue of profiled reinforcing steels

Stress concentrations arise from profiles of ribbed reinforcing steel bars and in this study the results of calculated stress concentration factors (SCF), by using finite element method, are related to the fatigue test results. It is apparent that the degree of confinement of a ribbed bar embedded in concrete not only affects the magnitude of the ultimate bond stress but also the bond stress-slip relation. Thus the rib geometry or profile pattern is designed for optimum bond characteristics and not for fatigue considerations. However the rib geometry influences the fatigue performance through the SCFs arising from the root radius, width and flank angles of the profiles. It is shown that these latter factors have a significant influence on the fatigue behaviour of reinforcing steel bars.     

Analysis of information exchange activities to actualize and validate situation awareness during shift changeovers in nuclear power plants

Shift work situations occur in almost all safety‐critical organizations, and the investigations of some catastrophes like Chernobyl, Exxon Valdez, and the Gol/Legacy mid‐air collision indicated that shift work information exchange played an important role during the evolution of the situation before the accidents. Inadequate communications during shift changeovers challenged operators' work in the moments that preceded these accidents, because they got inadequate information about the current situation. Our research focuses on the information exchange activities (verbal, written, and nonverbal) of nuclear power plant control operators during shift changeovers. Our aim is to investigate how verbal exchanges and other representations enable operator crews to share information regarding the events that occurred in the previous shift to achieve adequate situation awareness. Our findings indicated the importance and richness of the information exchange during the shift changeover process to update and validate individual and collective situation awareness, showing that information adequately shared enables the ad hoc configurations of regulation loops and a safer use of simplified strategies that can be understood and be validated by other operators, reducing the occurrence of cognitive overloads and contributing to the construction of a common cognitive ground that enhances system resilience. © 2010 Wiley Periodicals, Inc.     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.