Manual and computer-aided space analysis: a comparative study

Separate injections of Haemophilus influenzae type b capsular polysaccharide-tetanus conjugate (PRP-T) vaccine and diphtheria-tetanus-pertussis (DTP) reconstitution of freeze-dried PRP-T vaccine with liquid DTP vaccine have been shown to be safe and immunogenic in infants. The present study was conducted to test the safety and immunogenicity of the liquid combination vaccine administered to young infants in the dual-chamber syringe. The study was a monocenter, open clinical trial of 3 month-old infants receiving PRP-T and DTP vaccines in the dual-chamber syringe reconstituted prior to injection. Healthy infants were immunized according to a 3, 4 and 5 months-of-age schedule. The vaccine was administered in a dual-chamber syringe, ready to use with two chambers. The proximal chamber contained freeze-dried PRP-T and the distal chamber contained liquid combination-vaccine DTP. The freeze-dried PRP-T vaccine was reconstituted with the liquid DTP vaccine in the same unidose dual-chamber syringe (0.5 mL) and was injected intramuscularly into the deltoid region. Blood sampling was performed prior to vaccination at 3 months of age and after the third vaccination at 6 months. The primary end-point was the serological response to PRP-T vaccine as expressed by the percentage of infants with an antibody titer greater than or equal to 1 microgram/mL. The reactogenicity was expressed as the percentage of reported local and systemic reactions. A total of 108 infants were included in the study and received the dual-chamber syringe vaccine. After the third injection, all the infants had a PRP antibody titer greater than or equal to 0.15 microgram/mL and 94.4% of infants had a PRP antibody titer greater than or equal to 1 microgram/mL; the pertussis agglutinin titers were over the threshold 40 and 80 in all infants and 98.1% were over the threshold 320. After the third injection, all the infants had diphtheria antibody titers greater than 0.1 IU/mL and 83.3% had titers greater than 1 IU/mL; all the infants had tetanus antibody titers greater than 0.1 IU/mL and 97.2% had results over 1 IU/mL. Thirty-seven infants (34.6%) had local reactions and 64.5% had systemic reactions. The dual-chamber syringe may reduce the cost of vaccine delivery, as well as the workload, and increase the vaccine acceptability and coverage rate of vaccines.     

Inhibition of monocyte leukotriene B4 production after aspirin desensitization

Aspirin-sensitive patients may be desensitized through a graded series of exposures to aspirin. We investigated the underlying mechanism of aspirin desensitization by measuring the release of leukotrienes B4 and C4 from calcium ionophore-stimulated peripheral blood monocytes. Compared with monocytes from normal volunteers (n = 5), monocytes from patients with aspirin-sensitive asthma (n = 10) released increased amounts of thromboxane B2 (1060 +/- 245 pg/ml vs 456 +/- 62 pg/ml), leukotriene B4 (861 +/- 139 pg/ml vs 341 +/- 44 pg/ml), and leukotriene C4 (147 +/- 31 pg/ml vs 56 +/- 6 pg/ml) at baseline. After aspirin desensitization, thromboxane B2 release was almost completely suppressed in both groups. Leukotriene B4 release was significantly decreased in the aspirin-sensitive group (484 +/- 85 pg/ml) but not in the normal subject group (466 +/- 55 pg/ml). The need for prednisone decreased significantly after patients were desensitized to aspirin (10.4 +/- 2.2 mg/day to 1.6 +/- 2.8 mg/day). These results demonstrate that desensitization to aspirin results in decreased monocyte leukotriene B4 release. On the basis of the bronchospastic and inflammatory potential of leukotrienes, the decrease in leukotriene release may contribute to the clinical improvement seen after aspirin desensitization.     

Design Errors: Inefficiency or Carelessness of Designer?

Design defects are experienced in many projects; the difference is only in the extent of occurrence. This technical note discusses a design error case in a building project in Nepal, where the designer made the wrong assumptions in roof treatment work for waterproofing as well as for heat insulation purposes. From the investigation of the problem, it was found that the waterproofing polymer was not applied directly over concrete slab top. Use of heavy concrete block as a heat insulation material also helped to increase the leakage problem. The problem evoked loss of prestige for project officials, the design consortium, and the contractor.     

Limits of compensation in a failed antenna array

In large antenna arrays, the possibility of occurrence of faults in some of the radiating elements cannot be precluded at all times. In such situations, the radiation pattern of the array gets distorted, mostly with an increase in sidelobe level and decrease in gain. Although it is not possible to restore the pattern fully by rearranging the excitations of the functioning elements, compensation methods have been reported in the literature for restoring one performance parameter of the array and making a trade‐off on some other parameter. In this article, we have made a study on the tolerance level of this compensation process. One part of the study deals with the thinning in the failed array, that is, to find a limit on the minimum number of functioning elements of the array that can restore the digital beamforming of the failed array. The second part of study deals with finding the maximum number of element failures that can be compensated. The study was carried out by optimizing the amplitude excitations of the failed array. Instead of classical optimization techniques, particle swarm optimization was used for the compensation process. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:635–645, 2014.     

Kinetic Study of the Steam Reforming of Isobutane Using a Pt–CeO2–Gd2O3 Catalyst

Steam reforming of isobutane on a 0.5% Pt–Ce_0.8Gd_0.2O_1.9 catalyst was carried out from 300 to 700 °C under integral conditions with a gas hourly space velocity (GHSV) of 12,000 h⁻¹. The major products were H₂, CO₂, CO and CH₄. The other products produced were ethane, ethylene, propane and propylene with a total molar composition of less than 1.5%. A complete conversion of isobutane was achieved at 700 °C, Kinetic data was obtained by changing the partial pressure of the reactants and the temperature under differential conditions with a GHSV of 55,400 h⁻¹. This was done after observing stable isobutane steam reforming for 160 h and under conditions where the mass transfer limitations were insignificant. An empirical Langmuir–Hinshelwood type model that best fit the kinetic data available was developed.     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

Bacteria foraging optimization in antenna engineering: An application to array fault finding

Finding fault elements in linear antenna arrays using bacteria foraging optimization (BFO) is presented. One of the better options of array diagnosis is to perform it by measuring the radiated field, because in this case, removal of the array from its working site is not required and thereby not interrupting its normal operation. This task of fault finding from far‐field data is designed as an optimization problem where the difference between the far‐field power pattern obtained for a given configuration of failed element(s) and the measured one is minimized w. r. t. the excitations of the array elements. This set of excitations on comparison with the excitations of the original array gives the idea of the fault position and their type, such as either complete fault or partial fault. BFO being relatively new to microwave community when compared with other soft‐computing techniques, its performance was observed w. r. t. time of computation and convergence of the iterative process. Possibility of finding the faults from random sample points and use of minimum number of sample points for array fault finding are the novelties of the present work. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Extrarenal rhabdoid tumors of soft tissue: a clinicopathologic and immunohistochemical study of 18 cases

Rhabdoid tumor is a well-accepted clincopathologic entity among childhood renal neoplasms; similar tumors have been described in extrarenal locations. We present the clinicopathologic profile and the immunohistochemical features of a series of soft tissue rhabdoid tumors. Twenty-eight cases coded as extrarenal rhabdoid tumor (ERRT), RT, possible ERRT, and "large cell sarcoma" were retrieved from the Armed Forces Institute of Pathology soft tissue registry. The tumors were reclassified according to strict criteria by light microscopy, clinical information, immunohistochemistry, and, in some cases, electron microscopy. Soft tissue rhabdoid tumor (STRT) was defined as (1) a tumor composed of noncohesive single cells, clusters, or sheets of large tumor cells with abundant glassy eosinophilic cytoplasm, an eccentric vesicular nucleus, and an extremely large nucleolus; (2) positivity for vimentin and/or cytokeratin or other epithelial markers by immunostaining; and (3) exclusion of other tumor types with rhabdoid inclusions (melanoma, other sarcomas, carcinoma). Eighteen cases met our criteria for soft tissue rhabdoid tumors. The median patient age was 13 years (range, 6 months to 56 years). Ninety-four percent of STRT cases were positive for vimentin and 59% for pan-cytokeratin. Sixty-three percent and 60% were positive for CAM 5.2 and EMA, respectively. Seventy-nine percent stained for at least one epithelial marker; 76% stained for both vimentin and epithelial markers simultaneously. Forty-two percent stained for MSA, and 14% for CEA and SMA. CD99, synaptophysin, CD57 (Leu-7), NSE, and focal S100 protein were identified in 75%, 66%, 56%, 54%, and 31% of the STRT cases, respectively. All STRT cases examined were negative for HMB-45, chromogranin, BER-EP4, desmin, myoglobin, CD34, and GFAP. Follow-up examination in 61% of the STRT patients revealed that 64% of patients died of disease within a median follow-up interval of 19 months (range, 4 months to 5 years); 82% had metastases to lung, lymph nodes, or liver; 22% had local recurrences before metastasis; and 18% were alive without known disease status (median, 5.5 years). Soft tissue rhabdoid tumor is a highly aggressive sarcoma, predominantly of childhood. Besides having nearly consistent coexpression of vimentin and epithelial markers, STRTs show positivity for multiple neural/neuroectodermal markers that overlap with those of primitive neuroectodermal tumor.     

Effect of temperature and α-irradiation on gas permeability for polymeric membrane

In the present study the polyethersulphone (PES) membranes of thickness (35 ±2) μm were prepared by solution cast method. The permeability of these membranes was calculated by varying the temperature and by irradiation of α ions. For the variation of temperature, the gas permeation cell was dipped in a constant temperature water bath in the temperature range from 303–373 K, which is well below the glass transition temperature (498 K). The permeability of H₂ and CO₂ increased with increasing temperature. The PES membrane was exposed by a-source (₉₅Am₂₄₁) of strength (1 μ Ci) in vacuum of the order of 10⁻⁶ torr, with fluence 2.7 × 10⁷ ions/cm². The permeability of H₂ and CO₂ has been observed for irradiated membrane with increasing etching time. The permeability increases with increasing etching time for both gases. There was a sudden change in permeability for both the gases when observed at 18 min etching. At this stage the tracks are visible with optical instrument, which confirms that the pores are generated. Most of pores seen in the micrograph are circular cross-section ones.