Seasonal differences in neonatal jaundice

Cytomegalovirus is the main agent of congenital viral infections. The aim of this study was to compare the incidence of congenital cytomegalovirus infections of two groups of newborns of differing socioeconomic status. Cytomegalovirus was isolated from urine or oropharingeal secretions in 218 children born in a private clinic and 471 born in a public hospital. Positive viral isolates were confirmed with indirect immunofluorescence using monoclonal antibodies. Infection was detected in 12 children (1.82%), four coming from the private clinic (1.86%) and 8 coming from the public hospital (1.81%). Ninety two percent of infected children were asymptomatic. Urine and oropharingeal secretion samples had the same yield for viral isolation. It is concluded that the incidence of congenital cytomegalovirus infection is similar to that described in developed countries.     

Recent research progress on bio-oil conversion into bio-fuels and raw chemicals: a review

Recent advances in lignocellulosic biomass valorization for producing fuels and commodities (olefins and BTX aromatics) are gathered in this paper, with a focus on the conversion of bio-oil (produced by fast pyrolysis of biomass). The main valorization routes are: (i) conditioning of bio-oil (by esterification, aldol condensation, ketonization, in situ cracking, and mild hydrodeoxygenation) for its use as a fuel or stable raw material for further catalytic processing; (ii) production of fuels by deep hydrodeoxygenation; (iii) ex situ catalytic cracking (in line) of the volatiles produced in biomass pyrolysis, aimed at the selective production of olefins and aromatics; (iv) cracking of raw bio-oil in units designed with specific objectives concerning selectivity; and (v) processing in fluidized bed catalytic cracking (FCC) units. This review deals with the technological evolution of these routes, in terms of catalysts, reaction conditions, reactors, and product yields. A study has been carried out on the current state-of-knowledge of the technological capacity, advantages and disadvantages of the different routes, as well as on the prospects for the implementation of each route within the scope of the Sustainable Refinery. © 2018 Society of Chemical Industry     

Modular Functionalization of Electrodes by Cross‐Coupling Reactions at Their Surfaces

Due to the increasing importance of modified electrodes for many applications in nanotechnology, including molecular electronics, bioelectronics, and sensors, there is a need to find ways to chemically attach suitable molecular films onto the electrodes. Combining the electroreduction of aryl diazonium salts with the Sonogashira cross‐coupling reaction, a new modular technique to modify electrodes is presented. The new technique allows a wide range of functional groups to be introduced onto electrode surfaces with high surface coverage by the functional subunit. Various organic subunits, including redox chromophores, are successfully attached to platinum electrodes. The corresponding films are characterized using cyclic voltammetry, X‐ray photoelectron spectroscopy, atomic force microscopy, and contact‐angle measurements. The electroreduction of diazonium salts is successfully achieved on a broad variety of conducting and semiconducting surfaces, which shows that the technique is applicable to a broad variety of substrates.     

Shrinkage, density, porosity and shape changes during dehydration of pumpkin (Cucurbita pepo L.) fruits

The aim of this work was to study the changes in volume, density, porosity and shape factors of pumpkin tissue during osmotic dehydration (OD) and air drying (AD). Pumpkin cylinders with length/diameter ratio of 5/3 were used. OD experiments were carried out with solutions of sucrose, sodium chloride and mixtures of both solutes at different temperatures. AD experiments were conducted at 70 °C. Volume of samples decreased linearly with weight reduction (WR). Bulk density varied in a restricted range (5-13%) during dehydration and for all the methods maximum values were found. Particle density increased during both processes. Porosity increased at advanced degrees of dehydration, showing a minimum value at the beginning of OD and AD. The proposed models to evaluate shrinkage, bulk and particle densities and porosity from WR were satisfactorily applied. Image analysis showed that shrinkage of samples during OD was isotropic. Pumpkin cylinders increased elongation and decreased roundness and compactness during osmotic dehydration.     

Gas permeation properties of polyamide membrane prepared by interfacial polymerization

Interfacial polymerization technique has been widely employed to prepare reverse osmosis (RO) and nanofiltration (NF) membranes. The present study explores the possibility of preparing a polyamide membrane by interfacial polymerization and its utilization for the separation of CO₂ and H₂S from CH₄. A novel ultraporous substrate of polysulfone (PSF) was prepared by phase inversion technique from a solution containing 18% PSF and 4% propionic acid in dimethyl formamide (DMF) solvent. Thin film composite (TFC) polyamide membrane was synthesized on PSF substrate from the reaction between meta-phenylene diamine in an aqueous media and isophthaloyl chloride in hexane. The membrane prepared was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) to study intermolecular interactions, crystallinity, thermal stability and surface morphology, respectively. Gas permeabilities of pure CO₂, H₂S, CH₄, O₂, and N₂ gases were measured using the indigenously built permeation cell incorporated into a high-pressure gas separation manifold. At the feed pressure of 1 MPa, the membrane exhibited permeances of 15.2 GPU for CO₂ and 51.6 GPU for H₂S with selectivities of 14.4 and 49.1 for CO₂/CH₄ and H₂S/CH₄ systems, respectively. The observed N₂ permeance of 0.95 GPU was close to that of CH_4. The corresponding O₂ permeance was 5.13 GPU with a reasonably high O₂/N₂ selectivity of 5.4. The effect of feed pressure on polyamide membrane performance was examined. Further, molecular dynamics (MD) simulations were employed to compute the cohesive energy density (CED), solubility parameter (δ) and sorption of CO₂, H₂S, CH₄, O₂, and N₂ gases in polyamide membrane to corroborate theoretical study with experimentally determined gas transport properties.     

Control factors in the electrochemical oxidation of reactive dyes

Colour removal from textile wastewater containing reactive dyes can be achieved by using a small commercial electrochemical cell which was not specifically designed for this use. In this study, the decolorisation and electrical consumption are modelled. The results show that the electrolyte employed in the dyeing process is the main factor influencing the decolorisation of the wastewater. The flow and potential difference are also important factors controlling the electrochemical process. There are other variables such as pH and temperature that, within the intervals studied, do not have any effect on the results.     

Solution calorimetry: A novel perspective into the dissolution process of food powders

The enthalpy of dissolution of two food powders, maltodextrin and skim milk, was studied by means of isothermal solution calorimetry. The effects of the moisture content and the physical state of the samples were investigated. A reduced exothermic response was found as the moisture content of the samples increased. It was shown that this effect is reversible upon re-drying of the solid, unless crystallization occurs. In the skim milk powder, crystallization of lactose occurred, leading to a less exothermic response. In addition, the dissolution kinetics of single particles was followed in situ with real time video acquisition and a novel image analysis technique. The data showed a significant effect of the physical state of the powder on the dissolution kinetics. Fully amorphous skim milk powder dissolved significantly faster than the recrystallized counterpart. A clear relation was observed between the physical state of the powders, their thermodynamic response and the dissolution kinetics.     

Fiber optic fluorometer with dipping module

A fiber optic fluorometer with dipping module intended for use in studying the contents of phytoplankton in sea water at different depths is described. Using the device, it is possible to carry out continuous measurements under the conditions of the strongly variable illuminance of the sea. Results of measurements of the fluorescence of sea water by means of the newly developed fluorometer are presented. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 27–29, January, 2008.